Introducing CobKits.com - specializing in DIY and Citizen COBs

CobKits

Well-Known Member
ok lets try this again, my advertising credentials have finally been updated

cobkits.com - what products would you like to see?

upcoming:
constant current drivers
frame kits

by early next week we will have full stock of 1212 and 1825 in 2700,3000, and 3500K 80 and 90 CRI

4000K in 1212 and 1825, as well as 1818 from 2700-4000K are about 4 weeks out
 

Rayne

Well-Known Member
I may be among the minority on this suggestion... Higher CRI rated CREE diodes like the CXB3590 3500k 90min cri.

One of your competitors does not usually stock the 90min cri CXB3590 3500k. For those serious about buying the highest cri ratings you can make the option on a "Case by case" thing where they need to contact you before placing an order.
 

JorgeGonzales

Well-Known Member
yes im waiting for robins 140s to come in - the best passives around, hands down.
@robincnn leads, everybody else follows :clap:

your light engines need better options, with pin heatsinks and screws included
That's not better, just different. You aren't running 150W on a passive sink without spending serious cash.

I'd like to see some cree PCBS like EcoSunLite uses in their fixtures. Reds and blues and whites that you could just mount on a heatsink. Just like timber is doing with reds. NOBODY sells them.
I know somebody who would be happy to find a DIY distributor in the US ;)
 

see4

Well-Known Member
Not to be a pessimist, but your CREE CXB3590s you are selling for $44.00 are selling for ~$33 elsewhere. Is there something else you are providing with the chips that I'm not seeing?
 

Gingerbee

Well-Known Member
well more places for people to get good gear is always good to have lol and yes the sst140 are wicked just cant wait for them to be back in stock. good luck on your venture.
 

PSUAGRO.

Well-Known Member
Not to be a pessimist, but your CREE CXB3590s you are selling for $44.00 are selling for ~$33 elsewhere. Is there something else you are providing with the chips that I'm not seeing?
ships in leather padded boxes?lol.................what do you think?


wondering if Bobby is going to learn the driver specs before selling them?..............kind of important imo:mrgreen:
 

HydroRed

Well-Known Member
ok lets try this again, my advertising credentials have finally been updated

cobkits.com - what products would you like to see?

upcoming:
constant current drivers
frame kits

by early next week we will have full stock of 1212 and 1825 in 2700,3000, and 3500K 80 and 90 CRI

4000K in 1212 and 1825, as well as 1818 from 2700-4000K are about 4 weeks out
Glad you got your banner status worked out.
Its nice to see that you actually considered my suggestions on the other post regarding pre fab diy frame kits.
 

Airwalker16

Well-Known Member
Glad you got your banner status worked out.
Its nice to see that you actually considered my suggestions on the other post regarding pre fab diy frame kits.
Ya cred to @HydroRed for suggesting frames. That's a good idea. That'd be something you'd pre make or build custom to order? Would angle aluminum even be used? I'm interested.
 
Last edited:

CobKits

Well-Known Member
Not to be a pessimist, but your CREE CXB3590s you are selling for $44.00 are selling for ~$33 elsewhere. Is there something else you are providing with the chips that I'm not seeing?
no need to be cryptical, link it up so people can take advantage. Mine are $40 after RIU discount btw....i may discount them more we'll see. i dont have many cree left and are prob moving away from them, stocked for convenience more than anything and selling them close to cost (which was more than $33). good to see the crees coming down in price though...competition benefits us all
 
Last edited:

rob333

Well-Known Member
ok lets try this again, my advertising credentials have finally been updated

cobkits.com - what products would you like to see?

upcoming:
constant current drivers
frame kits

by early next week we will have full stock of 1212 and 1825 in 2700,3000, and 3500K 80 and 90 CRI

4000K in 1212 and 1825, as well as 1818 from 2700-4000K are about 4 weeks out
idk but i have been on a website called made in china.com and i have been in contact with a few led makers on there some have shit prices but alot have some really good prices like chines built cree cxb3590 leds for 79 a peace when ordering more then 2 peaces not only that they have vero and epistar leds that are all built in china for nest to nothing
 

CobKits

Well-Known Member
Ya cred to @HydroRed for suggesting frames. That's a good idea. That'd be something you'd pre make or build custom to order? Would angle aluminum even be used? I'm interested.
they'lll be standard. still experimenting with different angle profiles in my own builds

sorry @HydroRed , i bought a big bandsaw weeks ago in preparation :) great minds must think alike

the idea was born out of a guy i sold some cobs and heatsinks to... I was talking him thru it, and he was like "i dont have a drill". I felt so bad i built him a simple rack and sent it with the cobs and heatsinks mounted
 
Top