510 thread dry herb tanks

Nugachino

Well-Known Member
Hey everyone. I've just ventured into the world of vapes recently.

First thing I got was some crappy $30 rechargeable. I ditched it for having appalling battery life. And still burning my weed. Not knowing it had a head I could have added a new coil to for the unit I've now got.

Now I'm using a SMOK AL85. 85w unit with the TFV8 Baby Beast tank. Took a moment to learn the interface. But it's a good vape.

The thing is. I'm not sure where to get 510 threaded dry tanks from. I can find plenty of places that stock wet tanks. Just no dry ones.

I'm interested in the Mig VAPOR: BLACK & Dozer models. And things like the Mr Bald II & III. Open to suggestions on others too. These are for Australia by the way.

Also. I don't know how to make vape juice. Hence why I'm interested in the dry heads.


I'll take any help I can get when it comes to this. I don't know what's what. I've just stepped up to the tuneable vapes a few days ago.
 

Nugachino

Well-Known Member
The aussie market doesn't seem to want to stock those herb tanks. But I'm sure someone must know a good place that either stocks in Australia. Or will send here.
 

Nugachino

Well-Known Member
After scouring the Internet for a bit. And still not finding aussie stores with dry tanks. I decided to try international stores.

https://www.vapepartsmart.com
They stock an assload of parts. Deliver globally. And have good prices on their range.

I'm currently waiting for a Mr Bald 2 to come. Even bought a spare ceramic coil in case I fry the first one.
 

esh dov ets

Well-Known Member
found some attachments that give a flavor from inhaling but the pens are not powerful enough. there are some nice hand held herb vaporizers available but mostly expensive.
 

Roger A. Shrubber

Well-Known Member
if you're interested in making vape juice, buy a small bottle of peg-200, and another small bottle of peg-400. mix it in equal amounts, use 3 ml of it to a gram of hash. i recommend using qwiso, bubble, or bho , it dissolves easier than dry ice or dry sift hash. if thats all you have, i'd use a little everclear to melt it, let the alcohol evaporate, then use the melted kief to mix with your peg mix.
the two most popular products right now are wax-liquidizer, and ej-mix, and both are peg-200 and peg 400. they both cost 15 bucks for a 15 ml bottle..if you look around a little, you can find peg 200 and 400 for around 20 bucks for an 8 ounce bottle, so 40 bucks for 470 ml.....or a dollar a ml for wax liquidizer, or about 9 cents a ml for the peg....
 

twostrokenut

Well-Known Member
Hey everyone. I've just ventured into the world of vapes recently.

First thing I got was some crappy $30 rechargeable. I ditched it for having appalling battery life. And still burning my weed. Not knowing it had a head I could have added a new coil to for the unit I've now got.

Now I'm using a SMOK AL85. 85w unit with the TFV8 Baby Beast tank. Took a moment to learn the interface. But it's a good vape.

The thing is. I'm not sure where to get 510 threaded dry tanks from. I can find plenty of places that stock wet tanks. Just no dry ones.

I'm interested in the Mig VAPOR: BLACK & Dozer models. And things like the Mr Bald II & III. Open to suggestions on others too. These are for Australia by the way.

Also. I don't know how to make vape juice. Hence why I'm interested in the dry heads.


I'll take any help I can get when it comes to this. I don't know what's what. I've just stepped up to the tuneable vapes a few days ago.
Hey everyone. I've just ventured into the world of vapes recently.

First thing I got was some crappy $30 rechargeable. I ditched it for having appalling battery life. And still burning my weed. Not knowing it had a head I could have added a new coil to for the unit I've now got.

Now I'm using a SMOK AL85. 85w unit with the TFV8 Baby Beast tank. Took a moment to learn the interface. But it's a good vape.

The thing is. I'm not sure where to get 510 threaded dry tanks from. I can find plenty of places that stock wet tanks. Just no dry ones.

I'm interested in the Mig VAPOR: BLACK & Dozer models. And things like the Mr Bald II & III. Open to suggestions on others too. These are for Australia by the way.

Also. I don't know how to make vape juice. Hence why I'm interested in the dry heads.


I'll take any help I can get when it comes to this. I don't know what's what. I've just stepped up to the tuneable vapes a few days ago.
sub herb
https://www.migvapor.com/black-sub-herb-vaporizer

saw it on indoorsmokers recently, thinking of ordering one.
 

twostrokenut

Well-Known Member
if you're interested in making vape juice, buy a small bottle of peg-200, and another small bottle of peg-400. mix it in equal amounts, use 3 ml of it to a gram of hash. i recommend using qwiso, bubble, or bho , it dissolves easier than dry ice or dry sift hash. if thats all you have, i'd use a little everclear to melt it, let the alcohol evaporate, then use the melted kief to mix with your peg mix.
the two most popular products right now are wax-liquidizer, and ej-mix, and both are peg-200 and peg 400. they both cost 15 bucks for a 15 ml bottle..if you look around a little, you can find peg 200 and 400 for around 20 bucks for an 8 ounce bottle, so 40 bucks for 470 ml.....or a dollar a ml for wax liquidizer, or about 9 cents a ml for the peg....
so butane will blend fully? what pg/vg ratio would you say the consistency of this led quid is?
 

Nugachino

Well-Known Member
The Mig Vapor head looks to have better airflow than mine. That one is more like your standard liquid tanks with the adjustable airflow port.

My Mr Bald 2 tank is low airflow. And drawing any harder than a slow inhale causes the contents to evacuate the oven. I've remedied that with a square of mesh from my old grinder.

I think that's another thing the Mig Vapor does better too. It has a screen to hold the contents in place. At least I believe it does...

-edit- besides the mentioned flaws. I like being able to taste the subtle notes from my greenery now. Instead of just smoke and a weaker after taste.
 
Last edited:

twostrokenut

Well-Known Member
I've been waiting on a decent 510 dry herb tank for 5 years. the mods have the power now to preheat and temp control and it's starting to look promising.

that said, an ego cone and a dab dropped in the middle was an awesome vape 5 years ago (combustion) and this peg liquid looks promising.
 

Nugachino

Well-Known Member
Yeah. These tanks don't combust anything below 25W. I don't recommend going over 30w. Not just because the packet says not to. But I've found at the higher settings. The vapor tends to swiftly end up getting a smokey, burnt palette to it. Rather than that of what you're vaping.
 

twostrokenut

Well-Known Member
Yeah. These tanks don't combust anything below 25W. I don't recommend going over 30w. Not just because the packet says not to. But I've found at the higher settings. The vapor tends to swiftly end up getting a smokey, burnt palette to it. Rather than that of what you're vaping.
how much are the ceramic cups? they last a while?
 

Roger A. Shrubber

Well-Known Member
so butane will blend fully? what pg/vg ratio would you say the consistency of this led quid is?
theres no vg or pg in it at all.....its all peg-200 and peg-400....which is what people vaped-harmlessly-before morons pointed out that these are components in some antifreeze...and you can't drink antifreeze......of course, you aren't drinking it.....

and i don't use bho, i don't like the thought of it, i was speaking more from a consistency viewpoint, but i'm sure you would have no problem getting bho to dissolve in the peg mix.
you can either use a hot water bath or just put your container in the microwave about 8 seconds, stir vigorously, if it does't all dissolve, give it about another 5 and stir till it does, it takes quite a long time to settle out, and just a good shake or two gets it mixed back up.
i'm thinking about getting an emulsion blender, pretty sure if you hit it with one of those fresh out of the microwave it would never seperate at all

the consistency of the peg is quite thin, but the concentrate you add to it thickens it up quite a bit. wax-liquidizer says 2 ml to a gram of concentrate, but i've found three works a little better, may not be quite as potent, but it also doesn't gum up my coil in a couple of days
 

Bubblin

Well-Known Member
sub herb
https://www.migvapor.com/black-sub-herb-vaporizer

saw it on indoorsmokers recently, thinking of ordering one.
I've got one, imo it's garbage...
To get anything out of it you've gotta run the watts @ higher than the coil is rated for, and once you hit those temps it's all combustion, not vapor. That and there's like no air flow, filling my lungs with vapor from that thing would take like a week and the glass broke on mine after using it maybe two dozen times.

Fwiw, I've also got an arizer aeq extreme, which is a legit hot air vape. The mig subherb is nothing like a hot air vape, it's not even in the ballpark. Tho what little vapor I could get out of the subherb was tasty, but I could get the same taste and prolly buzz from stuffing my face in a curing jar and hyperventilating...

Anyway, imo if you're a heavy smoker/vaper get something decent, you'll be happy you did.
 

esh dov ets

Well-Known Member
if you're interested in making vape juice, buy a small bottle of peg-200, and another small bottle of peg-400. mix it in equal amounts, use 3 ml of it to a gram of hash. i recommend using qwiso, bubble, or bho , it dissolves easier than dry ice or dry sift hash. if thats all you have, i'd use a little everclear to melt it, let the alcohol evaporate, then use the melted kief to mix with your peg mix.
the two most popular products right now are wax-liquidizer, and ej-mix, and both are peg-200 and peg 400. they both cost 15 bucks for a 15 ml bottle..if you look around a little, you can find peg 200 and 400 for around 20 bucks for an 8 ounce bottle, so 40 bucks for 470 ml.....or a dollar a ml for wax liquidizer, or about 9 cents a ml for the peg....
pretty sure i'm alergic to POLYETHYLENE GLYCOL or peg and it's not natural. propylene-glycol or pg is often mixed with vegetable glycerin, vg; with more pg giving the bigger clouds. i'm going to try vg at home and i'll share the ingredients of the vape juice of the dispensary i work for when we make it. we will be using co2 extract and terpene extract.
 
Top