Club 600

dr green dre

dr green dre

Well-Known Member
quick cut an paste:(

Up and running again..
I'm now working in a Green Room Tent ,they 're a lot stronger than DR tents that i ve used before cause there corners are clamps made out of metal which is good but takes alot longer as all clamps need to be done with a allen key.:(
The setup goes like this:

GR240 x 240 x 200
4 x 600 hps -sunmaster
1 x 125 cfl red -1 x 125 cfl blue
10" carbon filter - 10" rvk fan - Accoustic ducting
8" Rvk fan - Accoustic ducting ( not up yet)
4 x 113 ltr tubs 4 x 90ltr tubs
10 way air pump and stones

Im going for a 4 week veg this time around and im going to try out a few different things in some of the pots ,different combos and stuff. Im going to try the whole vitalink range in some and the Bcuzz stuff others , this anit going to be not "lab test " . No aims or goals so just watch and enjoy!
Strains are Dogs ,Cheese ,Ex cheese, Haze and the Ak 747(renamed) in various locations ,cuts aint looking the best but they're alive.. Ive added 2 cfls to the room a red and blue for some differnt spectrum, i wanted the 250s but they werent in the shop.

I pulled one of the cuts out of the sacks on accident :( i popped it back in the clay balls as theres still a few roots still on it . Im not sure whats strain it was as cant find my label for it.I just hope it aint the one of the dogs.

I highly recomend the dogs , it needs a higher rating than i gave it before as the cured bud smokes and smells a whole lot stronger.Id give it a 9/10 now , this is definatley a keeper .
Maybe a 10 when it gets the proper time..

Dst Id buy those beans as soon as they're ready... my DPQs may have died my fault still but ive got a few more beans to pop..

Heres a few pics :
View attachment 1596971View attachment 1596972View attachment 1596973View attachment 1596975View attachment 1596976View attachment 1596978View attachment 1596981View attachment 1596982

:leaf:
Edit.
 

Attachments

BatCave

BatCave

Well-Known Member
dr green dre said:
Cool bat.. How did you fit a light mover in there? That NY Purp Diesel sound dank ive only smoke the NY Power D and its nice.. Them plants all the same?
Click to expand...
Dr. Green,
I just screwed the rail (44") into a 46" 1x6 , drilled holes for the heavy duty nylon ties, and nylon tied it to the supports, works great and took about 10 minutes to install. Allows me to keep the cooltube at 8" and no dark or hot spots, light mover only moves a total 24'' (12" in either direction from center) with a 30 second pause at each end. Works great and was only $105 on eBay.

Plants are NY Purple Diesel, TNT Kush, and TGA 3rd Dimensions right now and all different ages.

IMG_44291.jpgIMG_4755.jpg
 
DST

DST

Well-Known Member
Hey there peeps, just popping in to say Guten nacht fae Vienna Austria. What an interesting and wonderful country. Catch up with you soon 600, peace, DST
 
bassman999

bassman999

Well-Known Member
duchieman said:
Hey bassman, if I understand right, you have a barn shaped roof. Maybe you should try a tarp system like a grain trailer uses. Fasten your panda sheet, or whatever, to the whole roofline so it covers the whole length of the roof. On the other end of your panda sheet (the bottom) you fasten a tube of some sort, preferably with some weight to it to keep the tarp taunt. Then you just roll up, and roll down.
View attachment 1597691


Here's a vid that show's an automatic but it give an idea of how it works. 3:00 shows top view and 4:45 show the tarp in action.
[video=youtube;-4fi7zSW02U]http://www.youtube.com/watch?v=-4fi7zSW02U[/video]

Hope that helps.
Click to expand...
Thanx, that makes sense. I had no idea how the pipes would work before.
 
bassman999

bassman999

Well-Known Member
Thanx everyone for the advice, I have the panda already, now just need pvc pipes. I think I will use 2 sizes one secured to the tarp. Other one inside with 90* bends with a few ft of pipe as handles to pull from and to be a weight and something to secure it down from.
If I get it sorted out and implemented I will take pics.

I will need to figure out a way to attack the tarp to the pipe end so it doesnt unroll off the tube all the way. Maybe some sort of glue along with duct tape....
 
curious old fart

curious old fart

Well-Known Member
bassman999 said:
Best I can get from the net (visquine) is like panda film?
Click to expand...

It's a 2 mil opaque film that comes in all sizes. I usually pick up some from Lowe's.
Image x








Contractor's Choice 10' x 100' Clear 2Mil Painter Plastic

Item #: 16903 | Model #: RSCC210-100C


Be the first to write a review!

Share this product:







Navigation: Close




Store Detail



Enter Your ZIP Code to View Real-Time Pricing and Availability for Your Local Store:

ZIP Code: Find Store Find My ZIP
pageName=CachedItemPrice:,:; formattedTime=5/13/11 5:45:36 PM EDT; millis=1305323136556


Description x

Specifications x

Reviews x

Q&A x


Description





10' x 100' Clear 2Mil Painter Plastic
  • 1000 sq ft
  • 2 Mil
  • Clear
  • Plastic Sheeting
from Lowes

:peace:
cof
 
forgetfulpenguin

forgetfulpenguin

Active Member
Got a 600w ballast to replace my 400w one that needs to be fixed along with some Ushio bulbs. The things are so fucking bright that i can barely look at the whit flood tray without it leaving an afterimage on my retina. Plants are loving it though. I've got some lowlife great white shark and hindu kush going right now. They are going to be laughably small because a family member had to go to the hospital and as a result they got heavily neglected during the late seedling and early vegetative stages (seems to be very important time for autoflowers imho).

The kush is doing terrible but the GWS has taken the stress like a champ in terms of trichome (sp?) production. I'm not wasting your/rit bandwidth with pictures of the kush because
A.) they are embarrassingly small
B.) Fuck it there is no B I just don't want to show off how bad I fucked up this crop of kush.

(sorry my camera is crap)
400w
400w.jpg
600w
600.jpg
Great White Shark
gws.jpggws_split.jpg
 
Cindyguygrower

Cindyguygrower

Well-Known Member
How's it gang, Hope you'r all having a sweet week-end. Going to be bringing down my DPQ later today or tomorow, so ill get some Shot's of her and a nice frost DOG that's just "barking" lol Mad Frost :) :) :) And the bubble/cheese/kush that's also going crazy! Glad i got that flowereing snip to finnally take and hopefully stop a re-veg on her. Looks like it would be a good cropper too.
I'll get the update done over the week-end. Ive got a couple night-shift's picking seed's out lol.

peace
cindy
 
jigfresh

jigfresh

Well-Known Member
Sounds good cindy. Billcollector packing the flower room, and the buds ain't even big yet. Batcave checking in with some bomb looking NYPD (gotta love the accronym). Del6666 with some serious looking 12/12 from seed plants. One grow I'm going to try that sheit. Forgetfulpenguin... I don't post my worst pics either. I'll admit in text how bad I screwed up, but I really don't like showing people my mess', haha.

Stinkbudd and littlegrower killin it with the frosty-ness.

Bassman, I think GOOP might be a good solution. Shit binds to just about anything. Peeps at home depot or ace would know best (if you can get them to help you, lol).

Question for the 600. Making butter today gonna make some brownies. What kind of ratio should I use. Would an ounce for 2 sticks of butter be overkill or about right? Been a while since I made it.

EDIT: Here's what I'm waking up the neighborhood with this fine saturday morning. Sube las manos!

[youtube]f9aMmSzIHnI[/youtube]
 
fatality

fatality

Well-Known Member
bassman999 said:
does anyone know what glue would would to bond panda film to pvc pipe?
Click to expand...
this is a long shot and after a couple tokes but why not try to bond it with pvc cement? if you could hold it long enough for it to adhere i bet it would work good..... or say fuck it and go with the skank brown gorilla glue possibly, aint that shit supposed to hold anything
 
You must log in or register to reply here.
Top