Recent content by 420Jakers

Well, when I started checking shit out I saw the weather stripping was wrecked and then found the MAJOR leak through the attic door. I don't know why I didn't think of this, but I am going to change out the thermostat so I can give a little cooling at certain times if need be and raise the temp...

The air coming out of the cool tube wasn't hot at all, same with the air venting out of the 6" inline. With the AC on 76, temps range from 82-84 in the HPS tent and 81-82 in the LED tent. The last few bills were (in order) 185, 240, 325. We did have a huge heat wave recently but temps are back...

Hey all, My power bill has been through the roof since it started warming up and I am curious how much of my AC I am wasting due to my setup. Here is what I have. 1 room, approx 12x12 with two tents. The setup for each is as follows: 4x4 tent: (1) 600w HPS Cooltube with a 6" Can Fan Max...

Hey all, I have a 4x4 tent in a 5x5 closet, which has two 500W blackstar LED's inside. The tent is vented with a 4" inline fan and passive intakes on the tent...the vented air is vented into the attic and out of the closet. Temps are hitting 88 with both lights on, what type of fan(s) would...

Hey there, I have dual 500w blackstars in a 4x4x7 foot tent with a 4" inline fan and carbon filter installed above the lights, at the top of the tent. The exhaust vents out of the tent and then up into the attic space. The tent is inside of a 5x5 closet. With no internal fan for circulation...

Yeah, if I had to pull them out it would be a bitch!! The buckets are already lightproof, so I hope to avoid root problems :)

My buckets have water level indicators, a fill port and a ball valve near the bottom that hooks to a hose to drain. All I do is mix nutes, drop pump in nute bucket and hook hose from pump to bucket port to fill and voila. No need to move anything and can scrog away.

Hey there, I am thinking about placing (4) five gallon buckets in a 2.6x2.6 tent with a 4" inline fan for exhause and passive intake with a 500w Blackstar LED (flowering model) from start to finish and will be scrogging. My medium will be DWC and I have the Technaflora starter's kit for...

Funny, I was just looking at the center of the case...about to head to the hardware store and see if they have 3" flex duct. That way I can put a small flange on, attach the duct and just loop it for a cheap and easy light proof passive intake. Also, if I need more intake I can always mount a...

Ok, I will be patient and just let it be. The good thing is they aren't bunched up like all of the other pics I see of males.

Another pic - this is as close as I can get with one hand on the plant and the other on a camera phone ;) They kinda look like calyx's but I am a noob so /shrug

Fresh out of the box...so much for my Friday night RO wet t-shirt contest :( Made by Hydro-logic and purchased directly from Hydro-logic. The box has no damage from shipping but was packed poorly in my opinion (the RO-100 was inside another box with brown paper on both ends for padding and...

Updated pic sans disco lights...looks like a leaf on the left and a calyx on the right. Thoughts?

Nice, I am starting a 500w blackstar in a 2.6x2.6x5 tent the first week of Feb....can't wait to see what this bad boy will do with my autos!

Are you talking about the kind that are in the floor / ceilings that direct air flow? If that's what you are talking about, what about light leaks?