Recent content by CoreyPKGrower

I stand corrected !!! Since your idea is tested by you .... What do I know...

I have never found such a timer. But heres what I did to have two modes of operation on my fans. I didnt want my large fan running full power or off when the lights were off. So this setup alows for simple speed control of the fan when the timer is off. When the timers on the relay switches...

Just finished weigh in.... 5 Lbs. Now b4 you think I should be getting more. Keep in mind they are Purple Kush clones. Average for this plant is .5 lb per 1000w lamp. Its the most popular strain for what Im doing. So am stuck with it ! Fetching $1900 to 2300 /LB. Depending on quality of course...

Thanks Stonetech !! Well I am hoping for a modest improvement on this next round. Mostly root health and not having to use H2O2 to deal with root rot. I picked up some SM-90 for a wetting agent to help roots xfer better. Plus I can use on Spider Mites along with Neem. Ive been thinking...

Harvest all done ! Finished up Friday night. Its all in drying racks now so I will post final weight soon... Roots..... Well they were all VERY brown. The picture doesn't show it well cause of the camera flash. But they were very brow. Yet the plant was very healthy ! Tugging and mucking around...

Harvest Day !!!! Don't bug me... LOL. I will post my weights and stuff by the end of the week. Cheers !

Well there getting really close now !!! On the 5 of May(couple of days) they will be 60 days in flowering. Past grows have shown there ready by 65 days. So I'm going to water only tomorrow and using Final flush thru the water only period. Im pleased with the results and will be making a few...

Use a tee output after the pump. put an adjustable valve on one side back to your reservoir. The more you open the valve the less pressure and flow that goes to your garden. If thats an AC induction motor... Dont use light dimmers etc. You need a adjustable type frequency controller. Expensive ...

As long as the filter is not a charcoal or activated carbon type it will be fine. I use filters that are 1micron. Put a recirculation bypass on the pump/filter output back to your reservoir with an adjustable valve thou. You have a big pump there...

Hmmm... I used to be very anal about precise PPM values but found I was chasing my tail. Whats works best for me is a percentage of nutrients to water. Example. 100gal res. water only. Added 10ml/gal of Micro = 100ml total. Knowing the reservoir is 100gal. If after watering The reservoir now...

Have similar setup. I used flipboxes in the past. There all in the garbage now. I buy 1000w new ballasts for $120 each. Includes 25ft cords. and 10ft supply cord. I highly recommend u pick up 2 dual mode timers from Home depot. They have connections for NO (Normally Open) and NC (Normally...

Search for H2O2 on here ! You will find tons of info... I use 5ml per gal. At a top up rate of 20% per day. Its NOT gone in a day or two. If your using it as prevention or minor oxygenation. I went as high as 20ml/gal to deal with root rot. It saved my plants for sure. Everyone has an opinion...

Yes PK again... LOL.. Yes I have the exact same tub of plumbing part around here too ! Very handy sometimes. But always seems like I'm missing one part that I have to buy at some point .

Yes like this one... http://www.amhydro.com/index.php/Grower-Gear/IntelliDose.html And then add the Solenoid pac $400. As long as you dont mind putting your nutrients on a shelf above the unit ! If not then add $1400 for 3 pumps !!! I was going to incorporate Ph into mine but I already have ph...

LOL ! OK ! Let me know when you have it saved.. Thanks for the compliment Yak. It was an interesting challenge to design it. But I found out after after using it I want more features. So I'm back to the drawing board to make one with abilities to control my Feed pumps, and drain pumps and sense...