Shatter thread?

She's only been purging for a couple of hours. Why does some of it come out like budder and the rest shatter like? 140f heat pad under a 2gal chamber pressure gets to just about 29hg Probably won't max out cuz of elevation used puretane this run still trying to figure out the madness between butane brands and the rest of the process.

Too hot.

Try at 90-110f, 29hg is fine, just flip the slab every 24 hours. Should be good glass in about 3-4 days.

At least that's how I'm doing it in an AI oven. Should work the same in a chamber.

Also look at the temp of the concentrate, not what the heat is set at.

Mr.Goodtimes said:

Too hot.

Try at 90-110f, 29hg is fine, just flip the slab every 24 hours. Should be good glass in about 3-4 days.

At least that's how I'm doing it in an AI oven. Should work the same in a chamber.

Also look at the temp of the concentrate, not what the heat is set at.

Click to expand...

Well I learned that color is certainly strain dependent and not strictly time of harvest.
Dabs is hard
100 solid all purge had to get the pad to 105 to compensate for the transfer but the dab itself didn't fluctuate more than a degree or so off 100. Same problem. It's clear for the first 4 or 5 hours than it starts to cloud up and turn to crumble or what ever. It never changes completely some of it always stays clear

I actually have that problem with the lower two racks on my oven. The top racks always give me glass that never wax's.

I haven't been able to pin point it but I think it might have something to do with moisture or water in the material. I really don't know?

1. Doesn't look like you are winterizing. Start there.
2. Try not to scrape from dish or splatter platter. Always pour.
3. Separate the oil you have to scrape from the oil you poured. The stuff you scrape will almost certainly budder up.