Introducing CobKits.com - specializing in DIY and Citizen COBs

btw if you use code RIU those drivers are about $5 cheaper on my site FYI

Good day I have thought to buy the cob cxm 22 I would need 7. I saw this offer on your page and I wanted to know if Includes the one with the kit that asked is the one that brings the passive heatsink and the ideal holder or the bjb holder that would like to know which is the best
I also want to know which driver I need to run these 7 cob And I would need you to divide the amount to be paid in 2 bills and that one of 200 dollars you could?

email me at [email protected] ill get you straight

for a single spectrum id go 3500k 80 for veg and flower. unless you grow indicas and want stretch. 90 cri will stretch in veg a bit more.

if you want to do the two different cobs yes the 3000k 90 and 400k 80 would be my recommendation

CobKits said:

for a single spectrum id go 3500k 80 for veg and flower. unless you grow indicas and want stretch. 90 cri will stretch in veg a bit more.

if you want to do the two different cobs yes the 3000k 90 and 400k 80 would be my recommendation

Click to expand...

How about just for strictly a flower light? All 3000k 80cri?

3000 80 or 3000 90. i like the latter

CobKits said:

3000 80 or 3000 90. i like the latter

Click to expand...

4 cxm 3000k. 90cri and 1cxm 4000k. 80cri in centre and 1 hlg185h-48a (total 225 watts) it's a normal DIY?

that would be fine and if you didnt want 4000k 80 in flower you could unplug the other 4 cobs

you could even run the 4000k 80 by itself as an 85W veg light. the driver would top out at 53.5V and it would drive one cob fine

thats actually a great setup since you need so much less light in veg

CobKits said:

that would be fine and if you didnt want 4000k 80 in flower you could unplug the other 4 cobs

you could even run the 4000k 80 by itself as an 85W veg light. the driver would top out at 53.5V and it would drive one cob fine

thats actually a great setup since you need so much less light in veg

Click to expand...

vega 1 cob cxm22 4000k. 80cri (i need a driver for 1 cob 4000k.)
flower 4 cob cxm22 3000k. 90 cri

you can do it with same driver just disconnect the cobs you arent using

я need setup are via the potentiometer fixed to the unit?
soory it's my english. I very bad say in english.

i want to buy

185H-36A driver is better for the 1212s

[QUOTE = "CobKits, post: 13671583, участник: 940483"] 185H-36A водитель лучше для 1212s [/ QUOTE]
2 unit 185h48a for cxm22.

185h-36a for 1212 - no more dollars.

CobKits said:

3000 80 or 3000 90. i like the latter

Click to expand...

I placed an order through your website. What is the typical shipping time within the US?

usually same or next day, though im still waiting on 133mm heatsinks and 1212 3500k 80 cri gen 6, both of which should be in mon/tues

quick update for those waiting on 1212 3500k i just got them, they ship tomorrow. 133mm heatsinks are supposed to be here tomorrow as well

Hello good day I asked for some time ago but I did not understand your answer I already have an indoor 80x80 and I want to use cobcxm 22 I would like to know how many put and what driver i need and the cost for the drivers the cobs and the heatskin

Tripidipi said:

Hello good day I asked for some time ago but I did not understand your answer I already have an indoor 80x80 and I want to use cobcxm 22 I would like to know how many put and what driver i need and the cost for the drivers the cobs and the heatskin

Click to expand...

80x80 Inches, meters, feet?

You can check out cobkits.com for pricing.

prob 80 x 80 cm, you can do it with 4 or 5 cobs on a decent budget