DIY with Quantum Boards

Humple

Well-Known Member
First flowering week with the boards on the fixture, the girls look super happy so far. Running the boards (4 qb120 on 2.1 driver) on 70% and the cobs (5 vero29 36v on 1.75 driver) around 60%. Increasing the power daily in a few points until I'll reach 100% on the boards and 80% on the cobs.
Jilly bean clones where transplanted on Nov 1st, switched to flowering on Nov 12th.





Is that a 3x3?
 

pop22

Well-Known Member
I use the dry formula of several organic nutes, doctor Earth, Grow More, Jobes, and Kellogs. Mix it in good to your soil and let them grow, just add water!
This the Quantums best friend ....
No buying 50 god damn bottles of Nutes , supplements or sweetners ... It even has molasses !

Just this and Flower girl .... POOF ! .... Magic Weed.

No frills , no chicken shit , organic .... What's not to like ?

View attachment 4045292
 

Black Thumb

Well-Known Member
First flowering week with the boards on the fixture, the girls look super happy so far. Running the boards (4 qb120 on 2.1 driver) on 70% and the cobs (5 vero29 36v on 1.75 driver) around 60%. Increasing the power daily in a few points until I'll reach 100% on the boards and 80% on the cobs.
Jilly bean clones where transplanted on Nov 1st, switched to flowering on Nov 12th.






Hey what size / type of containers are you using.
 

Takeshy

Well-Known Member
Can you run these boards with a CC driver at 700mA ou even 500mA for efficiency? Or it is to low to drive them?
 

hom3mad3

Active Member
hey guys quick question, would it be possible to run 2 of the hlg 600h kits on one driver on @220?
I am thinking of replacing my hps and only have a single 220 outlet available.
 

Ryante55

Well-Known Member
Can you run these boards with a CC driver at 700mA ou even 500mA for efficiency? Or it is to low to drive them?
What board are you talking about? The 304 works great at 700ma I wouldnt go lower than that unless you need to run the plants closer than 12 in
 

Ryante55

Well-Known Member
hey guys quick question, would it be possible to run 2 of the hlg 600h kits on one driver on @220?
I am thinking of replacing my hps and only have a single 220 outlet available.
If you want to run 600w that's fine you don't get double watts from changing the voltage if that's what your asking. If your wondering if you can run 2 drivers on one 220 outlet that would be fine might even fit 3 or 4 depending on how many amps your breaker is
 
Top