Search results

  1. grisbi

    Buddies, side-light and under-canopy LEDs

    okay , thank you very much for the advise gonna make a spaceship :D
  2. grisbi

    Buddies, side-light and under-canopy LEDs

    hello sir how did you manage to stick so well your buddie to the tent. have some buddies to, didnt try yet, but im scared than the sticker wont be enought sticky can you tell me more about how you did it? best regards
  3. grisbi

    New lights, new spectra and some High Light strips

    amazing spectrum for the new board :D :D PERFECT would love 3 double board like this:, but what his the size of those double board sir pliz?
  4. grisbi

    Led Users Unite!

    finaly building my led grow light, 2 years after receiving my solstrip :D gonna be powered by : 2 illumi meshtek mtd slc01 , 1 deported meanwell 600w driver for the white nichia ( 5k optisolis +2000K) and 1 x 240w meanwell driver for the cree ( xd16@3500k + xqe 660/730) 6 x noctua 200mm (3 for...
  5. grisbi

    New chilled

    i know standard 5000k spectrum look like... i showed you 2 spectrum from cutter to explain you that phenomen.... if you dont understand it... im sorry i pass my tour :) seconde of all, i dont see any interesse to put 4000k and say's its 5000k .... seriously :D have a good day everybody ps...
  6. grisbi

    New chilled

    totaly disagree with you, study proovve that light is light and plant accomodate with all different kind of light.... so we prefering efficiency, and 3000 + 660 is a non sens because of all that red already present best choice is made by chilled , choosing 5000k for efficiency and put 660nm to...
  7. grisbi

    New chilled

    in english it could be so nice sir....
  8. grisbi

    New chilled

    sir.... i know the 5000k spectrum too, should have more blue if theire were only 5000k led sir.... but when you put so much 660 also, the spectrum look like 4000k because of the balance white/red but its 5000k full of 660nm spectrum to proove you that theire is an exemple of cutter led strip...
  9. grisbi

    New chilled

    its basicly 2 x 3 bar structure, so i guess you might be able to spread them in better way
  10. grisbi

    New chilled

    no sir, the choice of doing only 5000k is cleaver: -best efficiency on 5000k than 3000k - useless to get 3000k when you have so much red 660 led on it - able to use it on veg with this combo 5k + 660 - perfect to fit with the futur 5 channel spectrum control definitly no need those 3000k...
  11. grisbi

    New chilled

    its because of the number of the red 660 led in it sir its just mean the red are more dominante than the blue from the 5k:) AMMMAAZINNNG product, expensiv but its normal when you see the numbers of led inside! cant wait to see other product like that!! cant wait to see theire 5 channel board...
  12. grisbi

    Is the 650r worth the price?

    i cant imagine the built dream would be with this kind of led density and spread on led strip!! amazing job on this 650r hlg! looook so clean, and havvvve noooo doubt on the efficacity!! @Stephenj37826 do some strip with this led density!!!
  13. grisbi

    Aussie High Lights – we're official

    those leds putted in the first scrog net should improve a loooooooooooot the ppfd of the global room, would be able to get some light where it was almost impossible to get before. should be amazing to try that, need those to try :)
  14. grisbi

    Aussie High Lights – we're official

    the funniest stuff i read this morning.... i love @hybridway2 but you cannot fuck report and say that ^^
  15. grisbi

    Aussie High Lights – we're official

    ok thank you sir, im gonna ask to teknik and welight, have already bought lot of solstrip ^^
  16. grisbi

    Aussie High Lights – we're official

    find that solution pretty amazing, solve loooot of probleme of side led stripping, ip 67 , no heat problem ( plant can be on them) can i buy some! :D
  17. grisbi

    3D Printed 120mm Fan Shroud for Quantum Board Heatsinks!

    im more thinking on put my 200mm on the side of the heatsink to make an horizontale air circulation over the canopy
  18. grisbi

    3D Printed 120mm Fan Shroud for Quantum Board Heatsinks!

    amazing, gonna ask a friend to do the same for my 200mm noctua pc fan to fit in a 2020 structure! amazing man for the share!
  19. grisbi

    UV options for LED? Would it even help?

    would love to know what would be the spec of your next new uv strip @Stephenj37826 wanna know if i can couple them with the hlg 60 i bought from you, i found the temperature of that hlg60 high after 1hours using.... maybee will use the same driver from the hlg60 to use your futur uv strip +...
  20. grisbi

    UV options for LED? Would it even help?

    theire is some 280 in the natural sun radiation sir, im not speaking about a full blast of that lol just a little bit in concert with the 310/365nm few hour a day would be nice thc boost in my opinion
Top