21st Century Drip Using 320 GPH Pump

"I experimented with one liter and 4 liter APs, I would say benefits of larger are negligible" - Those 1 L APs are tiny. If they work the same, they should saturate with nuts much easier / quicker than the larger ones. 1 liter Dimensions 6" high x 4.75" Outside Diameter (4" base), compared to the 1 gallon sizing 9" high by 6" diameter. I'm going to try the 1 L Air Pots.
Any opinion on the less expensive "Root Routing Pot, 1 gallon Air Pruning Potting Container Nursery Pot" or the fabric pots air pots?
 

PetFlora

Well-Known Member
Keep in mind I use a combination of large/medium ornamental rock that I buy at the Dollar Store

All i seek is to get the nutes flowing throughout then quickly draining back to rez.


As to price, well they are 100% reusable for years


Inside AP.jpg Clones in APs.jpg HH with Plumbing.jpg
 

Popcorn900

Well-Known Member
I tried to get sheets of Floradrain last month so I can make my own air-pots but came to the conclusion that it would just be cheaper buying from an American at 15.00 for a 5liter, But I also have a hard time giving an American my Canadian money lol.
A Lot of bud there, Would like to see some close up's because to me they look very air'y and leaf'y but maybe thats the way they are. But still very nice setup and grow.
 

PetFlora

Well-Known Member
These are ~ 100% sats, which are much airier than indicas

They are very potent with a happy, upbeat/trippy/ do stuff high


I tried to get sheets of Floradrain last month so I can make my own air-pots but came to the conclusion that it would just be cheaper buying from an American at 15.00 for a 5liter, But I also have a hard time giving an American my Canadian money lol.
A Lot of bud there, Would like to see some close up's because to me they look very air'y and leaf'y but maybe thats the way they are. But still very nice setup and grow.
 

Popcorn900

Well-Known Member

OneEyedCat

Active Member
I want to know where you got the giant tinkertoy frame! That could be very useful in a small to large grow in any medium.
Hydro looks interesting but you certainly do a lot of work just making adjustments. I am too lazy for that!
 

PetFlora

Well-Known Member
The cube is part of a children's kit (frame to make a tent) I bought at Bed Bath & Beyond during the holidays. Only one store carried it in the 'area'. I had to drive 30 miles one way

You might try on line

I want to know where you got the giant tinkertoy frame! That could be very useful in a small to large grow in any medium.
Hydro looks interesting but you certainly do a lot of work just making adjustments. I am too lazy for that!
 
Thanks for those last pictures.
All i seek is to get the nutes flowing throughout then quickly draining back to rez.
I've started putting together my 'grow table' using the 1L AP's - Looking for a better idea for what to set each air pot in to catch the drain to send it back to the reservoir, while providing structure to stabilize the AP bottom. I thought about 6" or 8" end pvc pipe endcaps, but those are very expensive compared to just buying and cutting off the bottoms of 5 gallon buckets. Another idea was to cut 5 inch fence posts in half (lengthwize) to make channels to carry the runoff back, but those are almost too narrow.
 

PetFlora

Well-Known Member
Depending on how large/small your table is, buy an appropriately sized storage tote. Drill a ~ 1/2" hole in one corner and position the lid so that nutes drain to that spot. Here's the trick, most lids do not have a high lip (a yellow lid that I used in my led tent does), so you need to control the on time so that nutes don't overflow the lip. A larger hole will help control this

Stabilizing a 1 liter AP is not easy, which is why I went to the 4 liter, plus, the Hydro Halo Drip rings are >4", too big for 1 liter APs

Net pot lids fir the 4 liter, but the opening is too small for the HH rings

Using the Cube will help as you simply tie the branches to it


Cubes + Clones.jpg Single Cube.jpg

Thanks for those last pictures.

I've started putting together my 'grow table' using the 1L AP's - Looking for a better idea for what to set each air pot in to catch the drain to send it back to the reservoir, while providing structure to stabilize the AP bottom. I thought about 6" or 8" end pvc pipe endcaps, but those are very expensive compared to just buying and cutting off the bottoms of 5 gallon buckets. Another idea was to cut 5 inch fence posts in half (lengthwize) to make channels to carry the runoff back, but those are almost too narrow.
 

thinkbetter123

New Member
Depending on how large/small your table is, buy an appropriately sized storage tote. Drill a ~ 1/2" hole in one corner and position the lid so that nutes drain to that spot. Here's the trick, most lids do not have a high lip (a yellow lid that I used in my led tent does), so you need to control the on time so that nutes don't overflow the lip. A larger hole will help control this

Stabilizing a 1 liter AP is not easy, which is why I went to the 4 liter, plus, the Hydro Halo Drip rings are >4", too big for 1 liter APs

Net pot lids fir the 4 liter, but the opening is too small for the HH rings

Using the Cube will help as you simply tie the branches to it


View attachment 3018688 View attachment 3018689
Hey PetFlora, loving you posts/string here. I also use the Air Pots. Forgot what size I am up to. But they are expensive! The smaller ones are totally reasonable but this last size (I think?) I bought was quite pricey for "a pot". But they seem relatively fool proof. It seems no matter what the cost, I will be ahead vs. the street in the end.

Well, gotta go now. Magic Mike DVD is just starting. Duty, for beefcake, calls!! Hah! Yes, chick here!

I also use the drip system, not misted. What is your water source? Tap? I think you pump from a reservoir so at a minimum the water airs out Chlorine. Haven't read all the posts here, too "distracted" with wine etc right now. How about Mg and Ca in the water? I'm concerned I have lock out from using tap water that hasn't gone through reverse osmosis. Thoughts?

Really have to go. The beefcake and all... ;)
 

ASMALLVOICE

Well-Known Member
Good Afternoon,

I hope all is well in your world today. Haven't been on much until recently. The garden is giving up it's bounty to you. Gratz

I am in the process of building my new room, still a couple of weeks or so out.

Thanx for the share.

Peace and Great Grows

Asmallvoice
 

PetFlora

Well-Known Member
Time for an update

The last grow turned out great. Med-Man Silver Skunk Bx1 + BML SPYDR 600 led + High Performance Rez 2.0
Amazing what happens when a high performance nutrient delivery system is combined with excellent lighting:fire:

Rez adjustments included using 250 gph pump recir 24/7 cascading nutes over a container with polished ornamental rocks.

I wanted the recirculating nutes to splash into the rez, but did not pull that off. This time I will be using a dollar store dust pan filled with rock positioned high enough to create a ~ 10" water fall. Similar to fish tank water falls, which are $$$$$ and don't fit on my Coleman cooler rez tank

Just bought a 450 pump in case I need more flow to create more splash. The idea being to replicate flooming of a fast moving river, known to create positive Chi


And finally I bought 2 more large nuts to space the large magnets farther apart in hopes/expectation of creating a wider energy field for the recir nutes to pass through on their way to the water fall

Think I'm crazy? Ha, you should have followed my hpa trials and tribulations

Also expecting to be testing new led panels. Thinking to do a side-by-side v the SPYDR, so 2 tents to be ordered

will pop seeds in mid August

Look for new thread then:bigjoint:
 
Top