400w x 2 verticlal cooling, and radius

Red1966

Well-Known Member
I'm looking to down size my electric consumption somewhat. I currently am running 2 x 600w LP aeroponic SCROG in a 98 x 54 x 78 tent. Would I achieve the same or better results by going to a 2 x 400w soil or hydro vertical set up? If so, what radius should I put the plants at? I currently use co2. Any suggestions on a hydro or aero set up for a vertical? I want to reduce my number of plants, too.
 

monkeybones

Well-Known Member
same results, less product

that's 400w less of light, so expect like, up to 10 oz less in dried bud

but you will more than somewhat lower your bill

no experience with hydroponics
 

Red1966

Well-Known Member
I am currently using a LP aeroponic similar to the Stinkbud system. It is online to produce maybe double what I got in the same tent, same lights as my soil grow did, so I'd like to stay with it. I can shift the square tubes around to get a 30" diameter circle for the plant sites with 6 or 8 plants. I'm hoping that is about the right diameter. I have dimmable ballasts, 600w, 400w, and 350w. How big a light should I use for a 15" radius? I have some 2x3" vinyl coated fencing I can use to hold the plants from growing into the lights. Wanted to avoid buying new tubes, they don't sell the one-piece caps for the 4.75 tubes any more. I've tried to find 6" tubes, I know SOMEBODY makes them, but can't seem to find them for sale anywhere.
 

kingruar

Member
Does anyone here know the light spread of a 400w hps when hung vertically?

If it is recommended that a 400w is good for a 3x3 square in a standard setup, then wouldn't that mean when the build is hung vertically, it would cover a 3x3 wall?

Make sense?

Help? ha ha
 

smoke and coke

Well-Known Member
you will lose yield by dropping to 400's but if grown properly you can gets some of the yeild back by doing a vertical stadium grow. hang the bulbs vertical down inside about 3 feet apart.
directly under the bulbs i will lst the plants to keep the low.

by not using a reflector and the bulb down inside, the plants will get more direct light all around.







 

smoke and coke

Well-Known Member
I am currently using a LP aeroponic similar to the Stinkbud system. It is online to produce maybe double what I got in the same tent, same lights as my soil grow did, so I'd like to stay with it. I can shift the square tubes around to get a 30" diameter circle for the plant sites with 6 or 8 plants. I'm hoping that is about the right diameter. I have dimmable ballasts, 600w, 400w, and 350w. How big a light should I use for a 15" radius? I have some 2x3" vinyl coated fencing I can use to hold the plants from growing into the lights. Wanted to avoid buying new tubes, they don't sell the one-piece caps for the 4.75 tubes any more. I've tried to find 6" tubes, I know SOMEBODY makes them, but can't seem to find them for sale anywhere.

i have the 4.75 " tube. i made 2 of these but dont use them anymore. the caps on the end are pvc 4" to 3" reducer. the tube fits inside the 4" end and a 4" vent hose fits over the 3" end. i cut the 4" end so there wasnt so much plastic going over the glass on bothe ends.
i used these hanging vertical.

 
Top