petert
Well-Known Member
So.. I’m going to build a “room” in my 30x50 greenhouse. It will essentially be a 16x20 light deep room made of 2x4’s . Two 8’ framed walls on either end with a door on one end and covered with 1/2” plywood.
The sides will be two 10’ framed walls with a sheet of plywood at each corner.
I’ll run 2x4”s across the roof every 24” or so.
Then cover the top and sides with tarps.
My issue is my greenhouse floor is 4” of compacted 3/4 minus cover with two layers of heavy duty weed barrier all my power is in the middle of the greenhouse, so I’ve got nothing to anchor to.
If I brace it well and use corner tie braces along with the plywood. Should I be able to leave it free standing??
The sides will be two 10’ framed walls with a sheet of plywood at each corner.
I’ll run 2x4”s across the roof every 24” or so.
Then cover the top and sides with tarps.
My issue is my greenhouse floor is 4” of compacted 3/4 minus cover with two layers of heavy duty weed barrier all my power is in the middle of the greenhouse, so I’ve got nothing to anchor to.
If I brace it well and use corner tie braces along with the plywood. Should I be able to leave it free standing??