Building 1st aeroponic cloner need help!

Hi All,
I am in the process of building an aeroponic cloner since I have heard/seen such good results in pictures on forum. I pretty much have it built but i can not find anywhere in this forum or the net, how far are the sprayer nozzels supposed to be from the bottom of the baskets? I can adjust them to any height from the bottom, but I just need to know what is optimum? If there is any advice out there, I'd be down with it? My container is approximately 2 x 3 and I have about 30 2in baskets and plenty of pressure from the 900GPH pump.

keep the misters about 2 inches below the pots but ake sure the sray is shooting high enough to hit the net pot bottoms.Yeah got about 5 times more pump then you need but other then wasting electricity will work assuming you have enough misters rated at enough gph so the pump doesnt burn up from back pressure.If this is for actual cloning make sure you use the neoprene netpot inserts and no hydroton.Otherwise its actually easier to just use rockwool cubes and a humidity dome to start clones for hydro/aer setups

Thanks a bunch Fletch! I have had pretty good luck with rockwool and dome, but I have heard I can increase my quantity and time by using areoponics? I had to try it and I'll let you know if it's true or not..