.Smoke
Well-Known Member
My tap (city) water is 400ppm on a 500 scale, so I got un-lazy.
I have a dual/combined well (2 points/pumps thanks to geothermal) so this wasn't too difficult.
Brand new dedicated 1/2hp pump @ 55psi -> A.O. Smith Carbon/Sediment filter -> Liquagen 50gal per day RODI -> 2x - 30 gallon storage reservoirs on an auto shut float.
Going to replace the RO eventually with a larger system and stick this one under a sink with a bladder tank/tap. Can say it was fun, but I don't miss doing plumbing for a living.
Well water is measuring around 250ppm before the filters with just a small flush.
The Hempys will be happy.
I have a dual/combined well (2 points/pumps thanks to geothermal) so this wasn't too difficult.
Brand new dedicated 1/2hp pump @ 55psi -> A.O. Smith Carbon/Sediment filter -> Liquagen 50gal per day RODI -> 2x - 30 gallon storage reservoirs on an auto shut float.
Going to replace the RO eventually with a larger system and stick this one under a sink with a bladder tank/tap. Can say it was fun, but I don't miss doing plumbing for a living.
Well water is measuring around 250ppm before the filters with just a small flush.
The Hempys will be happy.
Last edited: