CLU058 vs CXB35900

PCXV

PCXV

Well-Known Member
20ishx20ish then? I still have to figure out the framing situation, going to try and source it either prefab or home depot. Replacing 600w hps.
 
Last edited:
PCXV

PCXV

Well-Known Member
CobKits said:
those cobs at 400W will be as bright as youre used to with the 600. dont go balls out at 600W in that space with your current nute regimen or you might be surprised
Click to expand...
Ok will do, thanks. Ive slowly been building up my nute regimem every grow. Last grow I was feeding 1.2-1.4 EC (every 3 days or so in soil) in the peak of bloom. It still seemed a little shy of full nutrition, thinking of bumping it up slightly next grow. Currently I have 4 seedlings under t5s.
 
PCXV

PCXV

Well-Known Member
CobKits said:
those cobs at 400W will be as bright as youre used to with the 600. dont go balls out at 600W in that space with your current nute regimen or you might be surprised
Click to expand...
Forgot to ask if I needed any of these before placing my order: http://cobkits.com/product-category/wiring/

Also, I am in soil using DG Foliage Pro, Protekt, and add 1/4-1/2 DG Bloom nutes in the peak of bloom. All added to tap water and phd to 6.4-6.8 and an EC from 0.8-1.4. My tap water has an EC of 0.2-0.4. With these cobs, do you think I will need to add calcium (cal/mag or similar)?
 
Last edited:
CobKits

CobKits

Well-Known Member
i dont do soil sorry, dont want to give you bad recs.

if running in parallel get 2 5 slot wagos, use one on + and one on -

slot1 = power from driver
slots 2-5- connect to cobs
 
PCXV

PCXV

Well-Known Member
CobKits said:
i dont do soil sorry, dont want to give you bad recs.

if running in parallel get 2 5 slot wagos, use one on + and one on -

slot1 = power from driver
slots 2-5- connect to cobs
Click to expand...
Can you add 4x 5-pole wagos to my order if it's not too late?
 
Godfather420

Godfather420

Well-Known Member
CobKits said:
10" spacing
Click to expand...
Curious, why 10"? It would seem on a 3x3 layout that you would get better spread on something closer to 14-16" would help with the center hot spot.. The reason why i ask is I'm working on a similar build... Only I'm doing multiple lights that will overlap beams...
 
Z

zuzuj

New Member
have question
i want to to upgrade my plant area from 2 plants/60w 200+ led's 4 type led bulb (red/blu uv ir)
to cca 1meter by 1 meter
how many cxm 22 i need ?
and what else ?
mean well hlg-185h-48v for power (how many i need)?
drivers ? which one is good for that light ?
how to connect ?
is this one for plants (3000k) for full grow circle ??
http://www.digikey.be/product-detail/en/luminus-devices-inc/CXM-22-30-95-36-AC00-F2-3/1214-1262-ND/4988721
or to pick some of
http://www.digikey.de/products/en?keywords=CLU058
but which one i need for full grow circle ?
sorry for too many questions ,but more i read i know less ..
and this post is very nice with explanations

so thanks if someone can help :)
 
Kaneh_bosm

Kaneh_bosm

Well-Known Member
Can I run (3) of your cxm 22 light engines in my 3x1.5 with hlg 185 48a? 2 plants I have 5' of height. How would I cool them?
 
B

bvolt

Member
CobKits said:
they rank something like the following in efficiency per my tests
clu058-3618
cxm32
.
clu058-1825
vero v7 70V
.
cxm22
vero v7 50V = vero v7 34V = clu048-1818
cxb3590
.
.
clu048-1212
Click to expand...
The 90 CRI 1818 seems to have the most "red" for the $ - or am I reading these charts wrong?
 
You must log in or register to reply here.
Top