1. We are currently experiencing issues with viewing and uploading images, our team is working on the issue.
    Dismiss Notice

Club Quantum Board

Discussion in 'LED and other Lighting' started by Budzbuddha, Mar 6, 2017.

  1.  
    sixstring2112

    sixstring2112 Well-Known Member

    :wall:
     
    MrTwist1, Abiqua and kmog33 like this.
  2.  
    kmog33

    kmog33 Well-Known Member

    My razors are made by Robin and are midpowered diodes mounted to a PCB just like the QBs, I was not aware we were so snobby in this thread about which panels made by Robin were being posted that I would get shit for posting a different panel made by them. I really hope the QB threads don't turn into the cob threads bickering over which led is better lol....

    Sent from my Nexus 5X using Tapatalk
     
    MrTwist1, jacrispy, key4 and 3 others like this.
  3.  
    sixstring2112

    sixstring2112 Well-Known Member

    your fine posting in here,nevermind the yoda troll he's flyin blind 99% of the time haha
     
    kmog33 and PetFlora like this.
  4.  
    ttystikk

    ttystikk Well-Known Member

    Frankly, YES.

    Why not? It's their hard work; why risk someone else hijacking it? Isn't that what branding is for?

    I want to see them succeed, something I've said to them and everyone else more times than I can count. Branding and trademarking their name is a legal, viable and effective means of protecting their work from unscrupulous operators, of which there are many in this space.
     
    pop22 likes this.
  5.  
    ttystikk

    ttystikk Well-Known Member

    EXACTLY.
     
  6.  
    ttystikk

    ttystikk Well-Known Member

    I thought better lighting was the whole point?
     
  7.  
    The Dawg

    The Dawg Well-Known Member

    I Bet That My Dick Is Smaller Than Yall's :hump:
     
    Toohighmf, MrTwist1, CoB_nUt and 8 others like this.
  8.  
    ThaiBaby1

    ThaiBaby1 Well-Known Member

    and his gf will vouch for that.
     
  9.  
    Abiqua

    Abiqua Well-Known Member

    about a quantum
     
    CoB_nUt and sixstring2112 like this.
  10.  
    kmog33

    kmog33 Well-Known Member

    Imo theres a point where most should focus on their growing skills rather than solely on how many lumens per watt their LEDs put out, lol. Anyhow, every one of these and cobs lack uv and ir that people like growmau5 and Robin are working on supplementing to actually complete spectral output for our plants. Efficiency is cool, new tech is also cool, discussions over how to improve setups in different situations is sweet as well, bickering over whether the midpowered PCB mounted leds I am using in my razors and the QBs (both lights designed and made by the guys at hlg) are the same (which I have posted the differences) is not so much.

    So for clarification, here are my horticultural lighting group made midpowered PCB mounted leds, not current most up to date midpowered LEDs used in the QBs. Sorry for anyone I offended. [​IMG]

    Sent from my Nexus 5X using Tapatalk
     
    MrTwist1, jacrispy, pop22 and 4 others like this.
  11.  
    kmog33

    kmog33 Well-Known Member

    I also want them to succeed, they're awesome.

    So can I post here and call mine quantum strip panels, is that an acceptable compromise, lol?

    Sent from my Nexus 5X using Tapatalk
     
    ttystikk and sixstring2112 like this.
  12.  
    ChaosHunter

    ChaosHunter Well-Known Member

  13.  
    kmog33

    kmog33 Well-Known Member

    They(hlg) actually are working on it a bit already. They sent me out this ir flower initiator I've been using that's pretty awesome. [​IMG][​IMG]

    Sent from my Nexus 5X using Tapatalk
     
    jacrispy, pop22, CoB_nUt and 6 others like this.
  14.  
    ChaosHunter

    ChaosHunter Well-Known Member

    Nice ! I've been looking at rapid led. I'm thinking of adding bars to my frame but I'm not even sure what I want to add. The QB gets it done in spades start to finish. I figure I'm going to have months of down time so why not play around a bit. Would like to try and optimize both veg and flower but not sure if there will be any significant Gaines. Would like to mix white with far reds and be able to flip a switch to light them up. I beleave the far reds are only on towards the end of a light cycle ? The whites I wonder if adding 5k or so chips will add anything to veg ? I use a 4K cob quantum style work light for a small veg light for the teens.

    I will probly make a rebuild post to follow ideas along the way.
     
    sixstring2112 and kmog33 like this.
  15.  
    The Dawg

    The Dawg Well-Known Member

    She Will Also Vouch That I Can Make Gene Simons Laugh And Go Into An Uncontrollable Rage That North Hollywood Has Never Seen Before All In 30 Seconds :hump:Peace And If You Don't Believe Ask Your Girlfriend Ho :hump:
     
    CoB_nUt, sixstring2112 and kmog33 like this.
  16.  
    kmog33

    kmog33 Well-Known Member

    I think that the complete spectrum of cobs and QBs teamed with the light output per watt, makes it very easy to keep MJ happy and healthy full cycle. That being said, I do think it's necessary to add both ir and uv to get the most out of your plants. I'm glad that people like hlg and growmau5 are making moves towards getting the capability to everybody. True full spectrum would be great if it could be done efficiently/affordably for home growers.
    <3

    Sent from my Nexus 5X using Tapatalk
     
  17.  
    MMJ Dreaming 99

    MMJ Dreaming 99 Well-Known Member

    The Dawg is a crazy mofo. How are you man! ?What is your current rig? Veros?
     
    The Dawg likes this.
  18.  
    The Dawg

    The Dawg Well-Known Member

    WELL I Just Kicked Some Serious Azz In The Party Cup Comp With A Cxb 5000k Ran At 60 Watts. Now In The Dawgs 5x5 Are My Vero Angles And In The Shed Out Back Are my Citizen 1812's I'm Pitting Them Against Each Other Comparing The 80 Cri To The 90 Cri :hump:Peace And I Would Post Pic But I Don't Want To Endure The Wrath Of The Quantum Board Natzi bongsmilie
     
    Abiqua, CoB_nUt, Moflow and 1 other person like this.
  19.  
    ChaosHunter

    ChaosHunter Well-Known Member

    Right on there. I'm just in a small 2x2 so adding full size COB's are out, that's why I was looking at rapid led chips led. Uv ir seems interesting I'll have to do some research as they have those chips as well. I wonder if they can be ran off the same driver and do you run them for the full light cycle ?
     
    Abiqua likes this.
  20.  
    kmog33

    kmog33 Well-Known Member

    The little photons do great in a 2x2 [​IMG]

    Sent from my Nexus 5X using Tapatalk
     
    Pistil Kid, jacrispy, pop22 and 5 others like this.

Share This Page