justugh
Well-Known Member
hello
well i am improving my set up and i got a better tent to grow in.........so my old tent is getting converted into a dry tent ..............this is my 3rd time drying and curing so i am really a noob
this is what i have learned please correct me if wrong
humity needs to be controlled 50% is the best
temp anything around 68 to 78 is good for drying over 80 the thc degrades faster
light is your enemy
air movement is good to strong is bad
the method i have been using is a the mason line........cut the plant as close to the ground as possible after the flush and 2 days in dark .......hang it on the line by one of the branchs......do not touch it for 5 to 7 days then take it down and clip the gaurd leaves off place in mason jars open every 12 hours for first 2 weeks
the set up as of now is
1 mason line
1 carbon scubber 3 months use time only 170 cfm with a 80 cfm booster on it
1 intake duct with 80 cfm booter fan with filter so runs little under what the scrubber pulls out
1 dry cure rack ( general hydroponics one the 6 lvl 36 inch round one from amazon)
1 16 oz dehumitifer
1 10 inch fan on low ( it is hanging mid lvl in the tent above the dehumitifer) staic air flow
so can u help me out is there more i can do/ know/ learn
this batch comming out is the best i have made so far and i have not messed up the drying and curing like i did last 2 ......thanks for the help
well i am improving my set up and i got a better tent to grow in.........so my old tent is getting converted into a dry tent ..............this is my 3rd time drying and curing so i am really a noob
this is what i have learned please correct me if wrong
humity needs to be controlled 50% is the best
temp anything around 68 to 78 is good for drying over 80 the thc degrades faster
light is your enemy
air movement is good to strong is bad
the method i have been using is a the mason line........cut the plant as close to the ground as possible after the flush and 2 days in dark .......hang it on the line by one of the branchs......do not touch it for 5 to 7 days then take it down and clip the gaurd leaves off place in mason jars open every 12 hours for first 2 weeks
the set up as of now is
1 mason line
1 carbon scubber 3 months use time only 170 cfm with a 80 cfm booster on it
1 intake duct with 80 cfm booter fan with filter so runs little under what the scrubber pulls out
1 dry cure rack ( general hydroponics one the 6 lvl 36 inch round one from amazon)
1 16 oz dehumitifer
1 10 inch fan on low ( it is hanging mid lvl in the tent above the dehumitifer) staic air flow
so can u help me out is there more i can do/ know/ learn
this batch comming out is the best i have made so far and i have not messed up the drying and curing like i did last 2 ......thanks for the help