DiY LEDs - How to Power Them

Growcob5

Active Member
My first post here,so here goes... I will be getting some cxb3590's soon. 4@3500k(36v) and 4@3000k(36v).What will be the best BIN's to buy for those 2 spectrums? I want 2 drivers and have been adviced by RapedLED to get 2 Mean Well HLG-240H-C1400B. Will this be a good driver for running 4 cobs or do you recommend something else? I am in the UK and have only been looking at RapidLED and Cutter Electronics. On cutter there is a back order and I dont really want to wait. I also contacted Jerry from KingBrite Electronics Co., Ltd today ,but I am still waiting on him to come back to me. Are they any good?Any other places I can look for the cobs and heatsinks(best BIN please). Bit of a noob here in regards with the cobs as I only ever used hps. I got 10 UGORG Disco Biscuits beans waiting,but want my cobs running first. Looking forward to any advice! ta
How u find lolololo jarry nubere i bat u did not buy from jarry. Hes a cool dude but ein u get 5 to 10chip shiping is like 45cash
 

Growcob5

Active Member
2017-07-12 11.11.14.png Screenshot_2017-07-12-10-29-40.png
Hey guys I was just doing some math and can’t quite decide if this will work...

Meanwell HLG-320H-C1400B
6 x Vero 29 BXRC-30E10K0-D-73 (https://www.digikey.ca/products/en?mpart=BXRC-30E10K0-D-73&v=976)

Any advice would be great.

Cheers
I can't believe that website you listed has a lot of the chips obsolete I really would not buy from her personally I would just get from rabbit led because they're chips or the same from what I can see top bin and they're only like $25 plus shipping. I like tham. Have you heard up citizen led clu48 1216. Thete like cheeper ther 160wat. And 36volts. And 2.4 amp sweet spot or it the max not shore but i like to get just to see my self




Here is shit i got its good

I got this driver for 27cash new 320watt in box 2800mah. 118volts its ok i pay 27cash. Hes got a 150watt 1750mah 20cash not bad but i need to i think of 20cash ones so i seid fuckit now i get me some bords 3 bords mabey to sunbords
 

Attachments

Last edited:

Hust17

Well-Known Member
Thanks for the advice, I’ve always ordered off of digikey and had no problems. I am also in Canada, so that affects my buys a lot, those prices were in Canadian dollars. I’ve also always used Vero’s and have no reason to move away from them, especially if it’s only a couple bucks in savings.

Thank you for confirming this set up will work, cheers and have a good one folks.
 

T-Time

Well-Known Member
I'll be ordering my gear from KingBrite in a day or two and need a conformation for my setup from someone. I think I have this figured out but better safe the sorry ;)

Will HLG-480h-c1400B accomodate 10x cxb3590 run at 1050mA ? In theory cobs run at this current are shy under 34V and this driver is maxing out at 343V


Second question.
What will happen if I exceed that max ? I mean, will it damage the components or just wont light up the cobs ?

Many thanks
T-Time
Sorry for quoting my own question but will that driver fit 10x cxb3590 at 1050mA ?
I need to order soon.
 
Last edited:

GBAUTO

Well-Known Member
Sorry for quoting my own question but will that driver fit 10x cxb3590 at 1050mA ?
I need to order soon.
That driver is designed to operate at 1400 mA-that is what it will push through the arrays. I suppose that if it was dimmed to that drive current it will have sufficient voltage to run your string. Just be aware that it may run out of voltage at 1400.
 

Growcob5

Active Member
What do i do whith this u no i see dud run 2012 chip. On 2amps ther 700mah chips than i seen a dud run tham on 3.6amps big sinks fans. So dude i no sed thow a way. What can i used for i figer qb Quantum boards in parallel I don't know I'm asking and has 114 volts does anybody want to buy this driver for 40 bucks brand new never been used15002568432871212307218.jpg
 

Growcob5

Active Member
Driver for sell 35 41500257424950-433241083.jpg 40cash maby 35 cash u need a driver new in box lol idk what can i do whith this what can it power how can i be safe an not blow my chips help pleeeeeeeeeeezz flip optics chips r hiy maby i get ebay 100watt cheepy put 4 chips in parallel one dish driver. Rock out with my pepep out lol
 

Growcob5

Active Member
I'll be ordering my gear from KingBrite in a day or two and need a conformation for my setup from someone. I think I have this figured out but better safe the sorry ;)

Will HLG-480h-c1400A accomodate 10x cxb3590 run at 1050mA ? In theory cobs run at this current are shy under 34V and this driver is maxing out at 343V


Second question.
What will happen if I exceed that max ? I mean, will it damage the components or just wont light up the cobs ?

Many thanks
T-Time
Somebody selling and then name brand drivers hundred and forty six
Pro and con's of using switching power supplies and drivers versus just powered drivers?
Ther selling 10 driver 1400mah 147volt inventeronics. O shit 240cash all 10 new in box dam 1400mah 150watt 147volt dc cool
 

kwigybo88

Well-Known Member
Got a driver with an output minimum of 230 volts. If my led string is only adds up to 216 volts, do you think it will work?
 

briz0r

Active Member
My DIY light wont turn on. These are 6 strips wired in series.
Quick picture to see if anyone can tell where i went wrong.

Driver: HLG-120H-C1050B
Lights: (6) Bridgelux BXEB-L0560Z-35E2000-C-A3
Current - Test 700mA
Temperature - Test 50°C
Voltage - Forward (Vf) (Typ) 22.1V
Lumens/Watt @ Current - Test 156 lm/W
Current - Max 1.4A



 

Attachments

Growcob5

Active Member
My DIY light wont turn on. These are 6 strips wired in series.
Quick picture to see if anyone can tell where i went wrong.

Driver: HLG-120H-C1050B
Lights: (6) Bridgelux BXEB-L0560Z-35E2000-C-A3
Current - Test 700mA
Temperature - Test 50°C
Voltage - Forward (Vf) (Typ) 22.1V
Lumens/Watt @ Current - Test 156 lm/W
Current - Max 1.4A



I need no max volt of drive and. I need to u to look at plug mak shore this littil prong is on the brown wire. Green grand last one gos u can figger but win u look at wall the small hole is positive is the small hole negative is the large hole




Than plug bzck in if not worh i need driver volt max out put and ill no than it its driver or bad wiering. But u shoud no if u have volt meeter u can see if u got power on ech strip lmk vaper410@gmail. If u need help an i not here
 

Growcob5

Active Member
Lolol i
If I have a 1050ma driver can I increase that drive current beyond 1050 or only dim it down? lol noob.
F i have a driver that 2800mah and i put on a 3amp xhip max and never run hard will ot be ok dim driver it is lol i got a Screenshot_2017-07-10-14-03-59.png hlep me out if u no what u put on this drive go for it guys or u need a driver 320watt 35cash urs
 

GBAUTO

Well-Known Member
I need no max volt of drive and. I need to u to look at plug mak shore this littil prong is on the brown wire. Green grand last one gos u can figger but win u look at wall the small hole is positive is the small hole negative is the large hole




Than plug bzck in if not worh i need driver volt max out put and ill no than it its driver or bad wiering. But u shoud no if u have volt meeter u can see if u got power on ech strip lmk vaper410@gmail. If u need help an i not here
I'm curious...is english your primary language?
 

Growcob5

Active Member
I have got a cheep 10watt chip and driver in the pic it just getting too high with the I'm thinking if I put a buck and better or a boost inverter and between the power supply and the 10 watt see you be chip do you think the power supply will get as hot as its getting now I'm about to just go ahead and buy a cheap driver
 

Attachments

Top