captainmorgan
Well-Known Member
Were you at the speedway?
DIY with Quantum Boards
- Thread starter robincnn
- Start date
Benefit14snake
Well-Known Member
I like the way you think! I'll have to try that out.If you go 3x5 why not put the p450 on the side wall to blast the sides of the plants?
You'll get nice buds .
Roger A. Shrubber
Well-Known Member
today ended up being chop day. was 6 weeks to the day, so took a full week to ten days off of the hps time.
672 grams wet, /4 =168, which is 6.25 oz.......when it goes in the jar i'll remove the bigger stems, so i'm expecting about 5 oz dry.
not the best i've ever done, but fairly respectable, and the quality looks to be top shelf.
sorry for the crappy pics, the flash died on my good camera and the camera on my phone is crap
quick update, just took two hits off the scissor hash, and i am fucked up. tasted like sharp lemon then faded to a fruity aftertaste.
672 grams wet, /4 =168, which is 6.25 oz.......when it goes in the jar i'll remove the bigger stems, so i'm expecting about 5 oz dry.
not the best i've ever done, but fairly respectable, and the quality looks to be top shelf.
sorry for the crappy pics, the flash died on my good camera and the camera on my phone is crap
quick update, just took two hits off the scissor hash, and i am fucked up. tasted like sharp lemon then faded to a fruity aftertaste.
Last edited:
JustMeds
Well-Known Member
Ya, sure was.
CobKits
Well-Known Member
As and Bs behave differently. in a constant voltage As put out more power if the voltage is matched correctly. the differences with constant current drivers are not as dramatic
Shiggity
Well-Known Member
I was going to wire two boards in parallel with the HLG240 c2100b to cover a 4x4. Two rails to cover the area. 4 boards total. 2 drivers total. So constant current. Basically replicating an HLG 550 but on two rails with two drivers. Will it make a difference in this case or will B drivers make the same 260w the A drivers would?
If you're wiring parallel you should split them (less current being ran through the boards) and throw a 2.5a 300v fuse inline on each positive.
714steadyeddie
Well-Known Member
That beast in the center is glue berry og from Dutch passion. (5gallon tupur)
Bodhi mothers milk on the left. (3gallon tupur)
These girls are ready to flip.
I have 3 legendary jack OG from cannarado vegging as well on the bottom left corner of the tent
Bodhi mothers milk on the left. (3gallon tupur)
These girls are ready to flip.
I have 3 legendary jack OG from cannarado vegging as well on the bottom left corner of the tent
Evil-Mobo
Well-Known Member
Looking good @714steadyeddie I got my first girl in tupur the other day and she hasn't skipped a beat from the transplant so far. I think the Tupur and I are going to get along well.
714steadyeddie
Well-Known Member
They like to feed a lot in tupur, I'm still finding the sweet spot! But I'm sure as you can tell once it's dialed in they fucking grow fast!
Evil-Mobo
Well-Known Member
I just don't see how people water/feed so many times a day my #3 is still not close to dry a day and a half later lol........
pop22
Well-Known Member
If your going to wire in parallel, you need to buy all three boards from the same batch with matched voltages. I'm running 4 on an HLG320H-C2800. The boards were ordered specific for parallel use.
captainmorgan
Well-Known Member
Yep Clio Michigan, spent a couple days near by at a private party but never actually made it into this one.
captainmorgan
Well-Known Member
4 days,I only managed 2 lol.