DIY with Quantum Boards

robincnn

Well-Known Member
Will you guys be re-stocking the slate 5 or 6 again?
@Stephenj37826 can comment on slate 5 availability.

We do not sell heatsinks for customers who do not buy original QB288/QB304 from HLG.
You can email HLG if you need heatsinks for your QB. If you are buying only heatsinks then you need to have boards ordered in past on HLG website . For Amazon board purchases include amazon order/date in email.
All these are available. May take a few days to ship
Slate 1 clear aluminum Color
Slate 2 clear aluminum Color
Slate 2 double clear aluminum Color
Slate 2 triple clear aluminum Color
Slate 4 Quad Green aluminum Color
Slate 6 double Blue Color
Slate 6 Quad clear aluminum Color

GrowersLights has more QB Kit options.
 

SB85

Well-Known Member
@Stephenj37826 can comment on slate 5 availability.

We do not sell heatsinks for customers who do not buy original QB288/QB304 from HLG.
You can email HLG if you need heatsinks for your QB. If you are buying only heatsinks then you need to have boards ordered in past on HLG website . For Amazon board purchases include amazon order/date in email.
All these are available. May take a few days to ship
Slate 1 clear aluminum Color
Slate 2 clear aluminum Color
Slate 2 double clear aluminum Color
Slate 2 triple clear aluminum Color
Slate 4 Quad Green aluminum Color
Slate 6 double Blue Color
Slate 6 Quad clear aluminum Color

GrowersLights has more QB Kit options.



I was asking because am interested in buying the heatsink along with the boards from HLG.




https://horticulturelightinggroup.com/collections/diy/products/slate-6-quad-module



was looking at that kit being as plan to go with a 5x5 tent
 
Last edited:

theslipperbandit

Well-Known Member
Guys keep up the amazing customer service your cx16 os still blowing my mind,cant wait for the HLG 600 haha ill be buying it even before ive the tent for it.
Cant fault your company in anyway shape for form.use to love Budmaster but your passion for perfection is admirable


And yes thw old cobs still work bang on @ day 14 of flip 4-5 different strains in there
 

Budzbuddha

Well-Known Member
@Stephenj37826

Here is the V1 prototype of Horticulture Lighting Group Elite Board on our SSTX heatsink. Our current QB 288 boards offer a superior performance and at a lower price.

View attachment 4088719


Back to drawing board. New V2 prototype under design and will be tested in 2 months.

yes those are 660 monos with 3000K White
please don't quote me and ask what LED is in there o_O

Good Lord ! ...... I must be high AF ..... I thought I was watching Star Trek !
Beautiful work ......... ......

Better pick which kidney to sell .......

Wife's or the god damn Dog
 

PurpleBuz

Well-Known Member
@Stephenj37826 and i have been designing Quantum boards since 2016

Here is the V1 prototype of Horticulture Lighting Group Elite Board on our SSTX heatsink. Our current QB 288 boards offer a superior performance and at a lower price.

View attachment 4088719

yes those are 660 monos with 3000K White
please don't quote me and ask what LED is in there o_O
nice mixed chip board.

but it still begs the question.....

should I enhance 3000k Samsung chips with 660 monos or should I mix with newer cri 95 chips like the nichia 757 optisolis or others that focus on the a wide fat band around 660 nm?

we already see Samsung 90 cri 3030 chips are over boosting royal blues to balance the shift in the yellow red peak to achieve the higher cri and lumen numbers The extra royal blue beyond 20% is NOT beneficial to production of flowering plants.
 

vilify

Well-Known Member
HLG-320H-C2800A, 2 boards, trying to push the full 320 watts but no matter how i wire it I'm only hitting 256 watts.

Do I need a different driver?
 

Rocket Soul

Well-Known Member
nice mixed chip board.

but it still begs the question.....

should I enhance 3000k Samsung chips with 660 monos or should I mix with newer cri 95 chips like the nichia 757 optisolis or others that focus on the a wide fat band around 660 nm?

we already see Samsung 90 cri 3030 chips are over boosting royal blues to balance the shift in the yellow red peak to achieve the higher cri and lumen numbers The extra royal blue beyond 20% is NOT beneficial to production of flowering plants.
Im a +1 on this idea, posted it a while back in god knows which thread. Seeing the spectrum on low K optisolis is pretty much MaCree copied. White phosphor led with a red peak in 660nm with a long fat far red tail all the way into infra red. Blue peak in 440 nm, samsungs are 450, right? Making the blue peak wider makes intuitive sense but im no expert.
Lum/w is shit on this chip but ppf/w should be on point. But not widely available and pricey.

White blurple, anyone?
 

pop22

Well-Known Member
What board? Do you have a poteniometer for dimming? Your not that low so it could be a faulty pot as sometimes they don't go to 0 ohms. And a pair of QB 288 won't pull 320 watts from that driver based on forward voltage

HLG 2018-02-13 15-56-26.png

HLG-320H-C2800A, 2 boards, trying to push the full 320 watts but no matter how i wire it I'm only hitting 256 watts.

Do I need a different driver?
 

Moocat87

Active Member
Hey @HeadbandKushMan I'm about to do a 4'x4' tent build with 9 (3x3 frame, a bit more spaced out than yours) QB132s but the one thing I'm not sure how to do yet is the frame. Can you tell me what materials you're using for the frame? Is it "angle aluminum"? Can I drill the holes with a regular drill or did you need a drill press? What you've got there is beautifully put together.

I was originally considering using PVC because it's easy, but I'd much rather use aluminum if I can learn how to work with it.
 

bizfactory

Well-Known Member
Hey @HeadbandKushMan I'm about to do a 4'x4' tent build with 9 (3x3 frame, a bit more spaced out than yours) QB132s but the one thing I'm not sure how to do yet is the frame. Can you tell me what materials you're using for the frame? Is it "angle aluminum"? Can I drill the holes with a regular drill or did you need a drill press? What you've got there is beautifully put together.

I was originally considering using PVC because it's easy, but I'd much rather use aluminum if I can learn how to work with it.
You can drill through aluminum with a regular drill and bits, it's a soft metal. Mark your drill spot with an awl first.

A drill press will just help making more accurate and straight holes...and probably speed things up.

Check out the square aluminum along with the angles. Both will work but the look of the square bars is really nice. And you can hide the wires inside if that's not too tedious for you.
 

Moocat87

Active Member
You can drill through aluminum with a regular drill and bits, it's a soft metal. Mark your drill spot with an awl first.

A drill press will just help making more accurate and straight holes...and probably speed things up.

Check out the square aluminum along with the angles. Both will work but the look of the square bars is really nice. And you can hide the wires inside if that's not too tedious for you.
Great tips, thanks!
 

HydoDan

Well-Known Member
Hey @HeadbandKushMan I'm about to do a 4'x4' tent build with 9 (3x3 frame, a bit more spaced out than yours) QB132s but the one thing I'm not sure how to do yet is the frame. Can you tell me what materials you're using for the frame? Is it "angle aluminum"? Can I drill the holes with a regular drill or did you need a drill press? What you've got there is beautifully put together.

I was originally considering using PVC because it's easy, but I'd much rather use aluminum if I can learn how to work with it.
Here ya go.. edit: http://ledgardener.com/diy-guides/
 
Last edited:
Top