Drain hole with shut off valve for cloner

friedguy

Well-Known Member
This is taken from: https://forum.grasscity.com/threads/lets-build-a-bubble-bucket-step-by-step.121335/

Parts needed:
Drill w/ 3/4" drillbit
2x #15 O-Rings
1x 1/2" Threaded Male PVC adapter
1x 1/2" Threaded female PVC valve
1x 1/2" male threaded to 1/2 barb adapter
1/2" tubing

1. Drill 3/4" hole where you want drain to be
2. Install o-ring on threaded side of male pvc adapter
upload_2017-1-20_11-37-33.png

3. Insert adapter in hole from inside
4. Install 2nd O-Ring on adapter
upload_2017-1-20_11-37-51.png

5. Install valve
6. Install barb adapter
upload_2017-1-20_11-38-24.png

7. Attach 1/2" hose
 
Top