Drying without a dehumidifier - increasing temp?

Time to make a few things clear.

How to understand the appearance of mold and how is it related to:
1) temperature
2) and RH

If the goal is to dry slowly, then how can I make sure to stay at optimal temp and RH?

Most popular answer would probably be to stay at 65-75F (18-24C) and 45-65%.

Considering that, I came up with few different examples which should help to find the way:
Most average: 70F (21C) and 55% - probably a 7 day dry?
Faster extreme: 75F (24C) and 45% - probably a 3 day dry?
Slower extreme: 70F (18C) and 60% - probably a 2 week dry?

But what if we get out of the popular limit of 65-75F (18-24C) and 45-65%?
Is there a reason why it's not recommended to go over 75F (24C) except the reason that it dries too fast?
What if RH is high enough - in my opinion then it doesn't dry too fast.
That leads to the biggest question - how exactly is temperature and RH related to eachother? Is it all about the point of saturation?
For example: what if RH is very high, like 70%, but temperature is 90F (32C) ? Is it possible to dry buds in these conditions?

Can you show me some kind of chart to understand it?

Isn't the whole point to increase temperature high enough to stay above dew point (point of saturation)?

somebody1701 once said:
Absolute humidity isn't relevant. That's the total amount of water in the air. Plants care about RH which is how much water is in the air relative to it's saturation point (which increases with temperature). Whether you raise RH with heat or lower it (and absolute) with a dehumidifier, neither the plant nor you should care about absolute humidity.

Got to find the chart or calculator for dew points related to certain temperatures.

But a big question still remains now: How high can we keep temperature while drying without hurting the buds - considering that RH is high enough and it will not be dried too fast.

An online dew point calculator says for example:

If air temp is 70F (21C) and RH is 55%, then dew point would be 53F (11.6C).

How much do we need to stay above dew point to be safe from mold?

chemphlegm said:

no, this thread will suffice for your continuation.

Click to expand...

You take our advice and twist it to your own fancy

...Dumb Dumber

https://www.rollitup.org/t/fast-drying-curing-vs-slow-drying-and-no-curing.953505/#post-13908236

I stand with the guys:

ps hows ya Mountain Dew

vostok said:

You take our advice and twist it to your own fancy

...Dumb Dumber

https://www.rollitup.org/t/fast-drying-curing-vs-slow-drying-and-no-curing.953505/#post-13908236

I stand with the guys:

ps hows ya Mountain Dew

Click to expand...

its good, thought the other thread was a good spot to talk about what the other thread was talking about without even knowing what this thread was talking about know what I'm I'm talking about?

Should I be looking at the VPD chart to avoid mold?

High RH isnt a big deal for mold when drying as long as there is good air movement, unless youre up in the high 70s. And even then...

Air movement is key.

Helmut79 said:

Should I be looking at the VPD chart to avoid mold?

Click to expand...

No.

70f, 50%, can be bagged 5-7 days later, or left hanging until the end of time.

Why did I even bother... ?