I have 2 - HLG-480H-C2100A .. how many of these can i run?...

steelcitydev

steelcitydev

Member
I am looking at DIY with the samsung quantum QB288 boards... I would like to run 6 of them but i am curious if these 2 drivers can handle that or more / less? Also I will want to add some additional LED chips for different NM ranges (660, 740, 840) I would obviously run these with a different driver, but could you also help me pick out a driver for those? I already have the 2 C2100A's ordered.

Thanks guys, this forum rocks.
 
greg nr

greg nr

Well-Known Member
those drivers should handle 3 boards each in series. The 288 is a 54v board, and the driver will handle up to 229v. 54*2.1a=~ 110w each.
 
Stephenj37826

Stephenj37826

Well-Known Member
steelcitydev said:
I am looking at DIY with the samsung quantum QB288 boards... I would like to run 6 of them but i am curious if these 2 drivers can handle that or more / less? Also I will want to add some additional LED chips for different NM ranges (660, 740, 840) I would obviously run these with a different driver, but could you also help me pick out a driver for those? I already have the 2 C2100A's ordered.

Thanks guys, this forum rocks.
Click to expand...
You can run 4 288s in series on that driver.
 
steelcitydev

steelcitydev

Member
okay and if i have 6 total PCB's i can use 4 on the one and then would i be able to use the other driver for the remaining two? What about the additional single LED's?
 
Stephenj37826

Stephenj37826

Well-Known Member
steelcitydev said:
okay and if i have 6 total PCB's i can use 4 on the one and then would i be able to use the other driver for the remaining two? What about the additional single LED's?
Click to expand...

You could add in up to ~120 more volts of whatever. They will be driven of course at 2.1a. cobs would work such as Vero 29/ citizen 1818+ so on.
 
steelcitydev

steelcitydev

Member
Do you mean i can add up to 120 more volts on driver 1 (that would have 4 PCB's on it) or do you mean driver 2 which would have the additional 2 PCB's?
 
steelcitydev

steelcitydev

Member
If I do not want to put any additional leds on driver #2 would it still work and how much wattage would it power the 2 pcb's at? I don't want to run the 2 pcb's and leds of a different spectrum on the same driver in case I want to turn off the leds (far reds, ir, etc)
 
Stephenj37826

Stephenj37826

Well-Known Member
steelcitydev said:
If I do not want to put any additional leds on driver #2 would it still work and how much wattage would it power the 2 pcb's at? I don't want to run the 2 pcb's and leds of a different spectrum on the same driver in case I want to turn off the leds (far reds, ir, etc)
Click to expand...
It would run them at about 120 watts each
 
You must log in or register to reply here.
Top