ISO Hash wont dry

purplehays1

purplehays1

Well-Known Member
SO i made qwiso with some bottom buds and trim from my last run. The problem is that it wont evaporate fully. It smells like all the iso has evaporated but the water (used 91% iso so some water) wont evaporate. It is cold (high 50's) and rainy where i live the last few days not sure if that is why (left outside). Should i give it some gentle heat? Will it evaporate eventually? Been like 2 days generally pretty dry within like 12 hrs.
 
lio lacidem

lio lacidem

Well-Known Member
purplehays1 said:
SO i made qwiso with some bottom buds and trim from my last run. The problem is that it wont evaporate fully. It smells like all the iso has evaporated but the water (used 91% iso so some water) wont evaporate. It is cold (high 50's) and rainy where i live the last few days not sure if that is why (left outside). Should i give it some gentle heat? Will it evaporate eventually? Been like 2 days generally pretty dry within like 12 hrs.
Click to expand...
Put a fan blowing air over It water will evaporate in 12 hrs or so
 
dirtWeevil

dirtWeevil

Well-Known Member
I evap my qwiso with force lol I use a dome shaped pyrex bowl, no corners, easy scrape. I put that bowl on a solid burner 600w electric hotplate and set it on high. After my qwiso is done on the stove I pop the bowl in the oven at about 200 and purge out as many of the remaining bubbles as I can, usually 30-45 minutes in the oven takes out the harshness
 
lio lacidem

lio lacidem

Well-Known Member
When I used to do iso runs I did a cold air evap then a cold purge in vacuum and end up with crystals like this2017-01-16 14.43.20.png
 
You must log in or register to reply here.
Top