This is a project I have been working on. I have been running different strains to find good scrog candidates. I plan to dial this cabinet in and see how much I can pull. It all started with an oak wardrobe that I bought for 80 bucks. The inside dimensions are 25 inches deep, 48 inches wide, and 6 foot tall. I gutted it and painted the interior flat white. It has double doors that meet in the center to close. I surrounded the interior with quarter round trim. I then put half inch foam on the quarter stock. Where the doors meet I pur a 1x4 and used 1 inch thick foam. When the doors close I srcew 3 screws with washers. As I tighten the screws, it seals the door. Lights are out but I will take more pics. After this run is done I will disassemble and rebuild with pics. I started with a 4 inch ventech fan and 4x12 ventech carbon filter. The filter was no good. I replaced with a 4x12 Phresh filter. The phresh filter is awesome. The first picks are the start. I had one auto while the other 3 vegged. The auto has been cut. The three left are, a female seeds c99, seedmans white widow, and dinafem white widow. The first three pics are the start. The bigger ones are current.