Sire's 3K HSO Blue Dream

Sire Killem All

Sire Killem All

Well-Known Member
Well guess i'll update whats been going on in my room. I took my clones to far into flower and they weren't looking all that great so i decided to pop all my freebies and run them so they will get about 2-3 weeks @ 18 hrs, then going into 12-12 when the scrog is ready for them. Figure might need to drop another light or 2 when it comes time for flowering, just hope i can get the four 630w Nanolux LEC's, dont think my A/C gonna make it with 4-5k watts burning, barely making it on 3k right now. so the past 3 days have been busy busy, 2 days of transplanting, then a day of watering and building a 4x12 ScroG, funny how ppl think it should only take a hour or 2 to transplant 28 plants into 3gal larger pot...SMH... figure i'll finish off the seedling in 3gal pots, transplant a week before the 12-12 flip.
20160312_053018.jpg 20160312_053031.jpg 20160312_053058.jpg 20160312_053109.jpg 20160312_053117.jpg
After 1.jpg 2.jpg 3.jpg 4.jpg 5.jpg
 
Sire Killem All

Sire Killem All

Well-Known Member
Decided to go pick up 2 nanolux 630 cmh, gonna run a mixed spectrum 1 lamp 4200k & 1 lamp 3000k per fixture. Gonna replace my two black Chinese hoods with the 630's, so will end up with 1000w hps in the middle of my 4x12 ScroG.
 
TheChemist77

TheChemist77

Well-Known Member
you may want to think about switching from mh,hps over to ceramic lighting, the 315 watt cdl lamps work really well and are 35% more efficient than hps..they also take a week off flowering times..1 315 is equal to roughly 500watts hps and easily cover a 4x4 area at 2ft above canopy.. i switched to ceramics a few months Ago and my gram per watt is way better than after 20 years growing with mh,hps... 1.35 gpw 1st grow, 2nd run 1.46 gpw, 3rd run in progress im expecting to get 1.5 gpw and hope to achieve a 1.75 gpw average in time...
 
TheChemist77

TheChemist77

Well-Known Member
Sire Killem All

Sire Killem All

Well-Known Member
TheChemist77 said:
looking good,, please tell me what u think of the nanolux brand cmh lamp?? so many different lamps to choose from, sunsystem, nano, phantom, boulder, etc...
Click to expand...
I don't have fancy equipment to test much, but my IR temp gun puts the ballast temp at around 100-104, top of hood 80, lamps maxd out at 350 degrees f. I got one Phillips lamp in the far end, not much to say so far there. 28" was to close for them.
They fit my likes a little more then the SS, I have used a few different sized hoods and have settled on more focused hoods, vs a wider spread. From 36" I'm getting about4'-4.5' spread still.
 
Sire Killem All

Sire Killem All

Well-Known Member
First night of 12-12, starts now. Got to try and get these temps to stay down, I don't know If it is because the CHM lamps are new and need time to burn out some of their intensity or what but I'm about 20" from the ceiling max on these light, so a longer veg would be crazy imo. I would probably like a 630 CHM setup a lil better if it was air cooled, with the shield glass made out of whatever the outer glass is. Was looking to save a lil on cooling cost but not sure that's gonna happen. Jus have to be happy with the 700w savings in wattage... as long as they don't funk it up for me.. 20160331_071937.jpg 20160331_071941.jpg
 
DesertGrow89

DesertGrow89

Well-Known Member
A lot of people say these cmh fixtures run cooler than HID but I haven't really experienced that either. Have you considered putting up movable reflective walls on dollies to maximize your lights?
 
Sire Killem All

Sire Killem All

Well-Known Member
DesertGrow89 said:
A lot of people say these cmh fixtures run cooler than HID but I haven't really experienced that either. Have you considered putting up movable reflective walls on dollies to maximize your lights?
Click to expand...
Have thought about hanging plastic from the second level of the scrog, I jus worry about the temps if I do it.
 
DesertGrow89

DesertGrow89

Well-Known Member
Sire Killem All said:
Well guess i'll update whats been going on in my room. I took my clones to far into flower and they weren't looking all that great so i decided to pop all my freebies and run them so they will get about 2-3 weeks @ 18 hrs, then going into 12-12 when the scrog is ready for them. Figure might need to drop another light or 2 when it comes time for flowering, just hope i can get the four 630w Nanolux LEC's, dont think my A/C gonna make it with 4-5k watts burning, barely making it on 3k right now. so the past 3 days have been busy busy, 2 days of transplanting, then a day of watering and building a 4x12 ScroG, funny how ppl think it should only take a hour or 2 to transplant 28 plants into 3gal larger pot...SMH... figure i'll finish off the seedling in 3gal pots, transplant a week before the 12-12 flip.
View attachment 3631407 View attachment 3631406 View attachment 3631405 View attachment 3631404 View attachment 3631403
After View attachment 3631402 View attachment 3631401 View attachment 3631400 View attachment 3631399 View attachment 3631398
Click to expand...
Why is it that you don't fill your solo cups to near the top with soil? What do you use to mix that much soil a concrete mixer? Looking good in there.
 
Sire Killem All

Sire Killem All

Well-Known Member
DesertGrow89 said:
Why is it that you don't fill your solo cups to near the top with soil? What do you use to mix that much soil a concrete mixer? Looking good in there.
Click to expand...
The cups were filled like that cuz always have a big stretch on my seedling, back fill as they do.
Use a kiddie pool or line the tub with plastic, use promix with xtra perilite so us not that bad, but need Alot of water jus to moisten it all.
 
Sire Killem All

Sire Killem All

Well-Known Member
TheChemist77 said:
you may want to think about switching from mh,hps over to ceramic lighting, the 315 watt cdl lamps work really well and are 35% more efficient than hps..they also take a week off flowering times..1 315 is equal to roughly 500watts hps and easily cover a 4x4 area at 2ft above canopy.. i switched to ceramics a few months Ago and my gram per watt is way better than after 20 years growing with mh,hps... 1.35 gpw 1st grow, 2nd run 1.46 gpw, 3rd run in progress im expecting to get 1.5 gpw and hope to achieve a 1.75 gpw average in time...
Click to expand...
Yea after this run if I get close to my last run I'm gonna change out my last MH/HPS to the 630 and maybe get 2×315w's, or just do a 630 for my veg area.
 
You must log in or register to reply here.
Top