VEG TIME INQUERY

arcalion

Well-Known Member
Do i see u trying to use the SCROG method or is that just support nets
i dont have any support nets or scrog haha this is my veg room, my Flower room is currently overgrown my previous plants i would veg for 2-3 months with multiple tops but they got way to huge and are all falling over and such with nutrient deficiencies in some since i dont do the run off which i gotta correct
 

Haze the maze

Well-Known Member
It' master kush by humboldt. I've been told by a master grower usually 4 weeks from that picture they're 3-4foot plants in veg. But my humidity is only 31% and my temperture is 75F I'm also only using 1. 1000watt light for a 8x7 room lol so maybe because the light isn't specially centered on the plants they'e growing slow.
In the picture you can't see the light. But you get the general idea lol
Can you split your outgoing air back into your room you temps are to low as well. You may not need to even vent your room as much as you are. this will increase your humidity as long as it is not to hot.
Lets go to groweedeasy again and look at what the temps should be in the growing room area ie. near the plants.
70-85 F 20-30 C for veg.
I like about 82F
The right temps will make your plant drink more and grow bigger faster.
 

Bigz2277

Well-Known Member
U got some resistant strains than my man. They look very healthy. But if u continue the soil route. Try the super soil. ^_^
with love.
bigz
 

Bigz2277

Well-Known Member
Can you split your outgoing air back into your room you temps are to low as well. You may not need to even vent your room as much as you are. this will increase your humidity as long as it is not to hot.
Lets go to groweedeasy again and look at what the temps should be in the growing room area ie. near the plants.
70-85 F 20-30 C for veg.
I like about 82F
The right temps will make your plant drink more and grow bigger faster.
^this
 

arcalion

Well-Known Member
Can you split your outgoing air back into your room you temps are to low as well. You may not need to even vent your room as much as you are. this will increase your humidity as long as it is not to hot.
Lets go to groweedeasy again and look at what the temps should be in the growing room area ie. near the plants.
70-85 F 20-30 C for veg.
I like about 82F
The right temps will make your plant drink more and grow bigger faster.
yeah im going to see what i can do about getting the temps a lot higher, ill definitely have to do something with extraction fan atleast get a very weak one for the veg room. or either add another HPS light and maybe have two 600W but from the looks of it its better to just get the extraction fan. i dont really think i want to turn it off, and i cant really split the air i have most of the air going through the attic lol

Also this is Promix
 

Bigz2277

Well-Known Member
Your temps to not need to be higher. 79 F was my sweet spot. lowering temp during the night cycle will bring out the colors of a strain. Nothing lower that 62 F IMO.
 

arcalion

Well-Known Member
Your temps to not need to be higher. 79 F was my sweet spot. lowering temp during the night cycle will bring out the colors of a strain. Nothing lower that 62 F IMO.
i mean for Night time temps in veg i wouldnt want them under 68 for sure, Flower room gets a lot colder this is what my master kushs have gained in color being close to 65-62
 

Bigz2277

Well-Known Member
Exactly ^_^. veg room should stay a constant temp. I meant lower temp during the flower cycle at night for them.
Keep it up man. they look great
 

ANC

Well-Known Member
Keep working at it.
A good continuous cycle can work as follows.
3 weeks rooting clones (I'd start with rooted clones to cut this first 3 weeks.)
Then 3 weeks veg after which you trim/top the plants (leaving 2 weeks for recovery), trimmings are put into a rooter to start the next batch of clones.
Next 8 weeks is spent on transition, bloom and (optional flush) period then harvest (3 transition, 3 bloom and 2 weeks maturing/flushing).
This means the next set of vegged clones are ready to go into the flowering room on the day of harvest.

Growth rate depends a lot on the system you use. Soil is easiest but slowest, then coco or similar medium that imitates soil without the nutrients, a tiny bit more work than soil. If you step up risk with difficulty you could grow even faster with deepwater culture or aero.
 

Haze the maze

Well-Known Member
yeah im going to see what i can do about getting the temps a lot higher, ill definitely have to do something with extraction fan atleast get a very weak one for the veg room. or either add another HPS light and maybe have two 600W but from the looks of it its better to just get the extraction fan. i dont really think i want to turn it off, and i cant really split the air i have most of the air going through the attic lol

Also this is Promix
That's all I use for My medium.
Do add lots of perlite. Don't cheap out on this step the plants need lots of air and they need to get rid of any water that try's to stick around after you water..
You are growing in a non soil medium with no living organisms so don't add nutes that are not available right now.
 

arcalion

Well-Known Member
Keep working at it.
A good continuous cycle can work as follows.
3 weeks rooting clones (I'd start with rooted clones to cut this first 3 weeks.)
Then 3 weeks veg after which you trim/top the plants, trimmings are put into a rooter to start the next batch of clones.
Next 8 weeks is spent on transition, bloom and (optional flush) period then harvest (3 transition, 3 bloom and 2 weeks maturing/flushing).
This means the next set of vegged clones are ready to go into the flowering room on the day of harvest.
Clones is the next thing i will be working towards, i think i will Top one of the next plants thatll be going into flower and keep one to be the mother, last time i did clones though my PH meter was absolutely F'd up and would read my local water an entire 1.0 below what it actually was, not even resetting it would help besides when i would use a 7.0 solution and calibrate it to that. but still water was 1.0 lower. clones all died and got major phosphorous deficiency and never grew. 5.2PH for Promix definitely doesnt work lol
 

ANC

Well-Known Member
If you are working with seeds, it is a good idea to snip a branch early and put it into 12/12 to confirm sex.
 
Top