DiseasedChaos
Member
I plan on building a bubbleponics system but the only problem i have finding is a water pump manifold that will let me have feeder tubes to the netting pots...does anyone know where i can get this at?
Water Pump Manifold Question
- Thread starter DiseasedChaos
- Start date
FryingPanFlyer
Active Member
I just answered this in the bubbleponics thread, but you can get them at Lowes or anywhere that sells drip irrigation equipment.
DiseasedChaos
Member
Im going check it out today thanks alot... lowes here i come
MataGrowa
Well-Known Member
Home Depot in the outdoor irrigation section (which is inside the store not is the outside section) it is made my Rainbird costs somewhere around 7.95 comes they usually have 4, 6 or 8 outlets but they can all be controlled separately so you can use as many or as few as you want and adjust the drip to however much you want. Also you definately want the one with adjustable flow so you can decide how much or little water is emitted.
MataGrowa
Well-Known Member
Sorry didn't see Frys reply when i wrote mine so, what he said.
FryingPanFlyer
Active Member
I
Illegal Smile
Guest
Or you can skip it all together and do what dwc growers have been doing for years per the link below.
DiseasedChaos
Member
Yep went and got one today came to 11 bucks
HIWAY
Member
To bubbleponicers with tubes . I have found that the irrigation manifold that you use to start your grow has a problem with the little valves that you use to regulate the flow have a tendancy to clog up with salts and I was constantly adjusting the flow . I seem to have solved this by going to a central valve between the pump and the manifold , If you leave the adjusters wide open and adjust your flow with the central valve .this seams to have solved the clogging and constant readjusting of the valveson the manifolds.
just my 2 cents worth
just my 2 cents worth