theratfords
Well-Known Member
Hey guys and gals. I hate asking this question cause I know the variables. I've just never hurried plants like this so Im curious. I have 5 female widows in flower about 6 days now. I'm gonna be switching from soil to hydro FINALLY! So I'm in a rush to get these 5 done. But instead of ditching them, couldn't do it; I figured I'm flower em real early.
They are all between 6 and seven inches tall with around 10 branches a peice.
They vegged under a 1000w mh for almost a month under 20/4.
Flower is under a 1000w hps (very good bulb) at 12/12 of course.
I did some topping and prunning only when the plants required it. Nothing in flower except absolutly necessary fan leaf prunning per light needs.
I use Miricle grow All purpose soil, 4 gallons per plant.
Veg nutes were Dutch Master One Grow nutes, and mollases(2tblspn per gal.).
Flower nutes are Dutch Master One Flower with same mollases mixture and
3 supplemental nutrient combos for each stage of flower.
The room is a constant 77 degrees with a 8-10 degree night temp drop.
Exaust vent run to carbon filter in room with air cooled intake ducting as well.
Watered every 2-3 days depending on need per plant.
Nutes were started at 1/8 solution and increased to slightly higher than manufactures suggestion during flower and veg. Nute solution wasn't increase after very slight nute burn on very tips of leaves was prevalent; Solution leveled off.
2 rotating tower fans are kept at either side of the grow space which is a little over 9 sq. ft.
If pictures are needed I'll post them when I get a new transfer cable for my cam.
Sorry for the another yeild question ya'll. Just have no idea how much people get off flowering plants this small. I usually wait till 2 foot to flower as I have 11 ft. of vertical space and the light system on movable chains.
They are all between 6 and seven inches tall with around 10 branches a peice.
They vegged under a 1000w mh for almost a month under 20/4.
Flower is under a 1000w hps (very good bulb) at 12/12 of course.
I did some topping and prunning only when the plants required it. Nothing in flower except absolutly necessary fan leaf prunning per light needs.
I use Miricle grow All purpose soil, 4 gallons per plant.
Veg nutes were Dutch Master One Grow nutes, and mollases(2tblspn per gal.).
Flower nutes are Dutch Master One Flower with same mollases mixture and
3 supplemental nutrient combos for each stage of flower.
The room is a constant 77 degrees with a 8-10 degree night temp drop.
Exaust vent run to carbon filter in room with air cooled intake ducting as well.
Watered every 2-3 days depending on need per plant.
Nutes were started at 1/8 solution and increased to slightly higher than manufactures suggestion during flower and veg. Nute solution wasn't increase after very slight nute burn on very tips of leaves was prevalent; Solution leveled off.
2 rotating tower fans are kept at either side of the grow space which is a little over 9 sq. ft.
If pictures are needed I'll post them when I get a new transfer cable for my cam.
Sorry for the another yeild question ya'll. Just have no idea how much people get off flowering plants this small. I usually wait till 2 foot to flower as I have 11 ft. of vertical space and the light system on movable chains.