Yields and cabinets

Here's my little lady and her clones. Don't know if the clones will survive though. I'm hoping at least one takes hold this time. Clones are a week old. Mother is just over a month in reveg.

Nugachino said:

Here's my little lady and her clones. Don't know if the clones will survive though. I'm hoping at least one takes hold this time. Clones are a week old. Mother is just over a month in reveg.

Click to expand...

Did you uppot her when you reveged? from my experience with reveg they like to be uppotted as soon as possible to give them more room for new roots to grow .

Nugachino said:

Here's my little lady and her clones. Don't know if the clones will survive though. I'm hoping at least one takes hold this time. Clones are a week old. Mother is just over a month in reveg.

Click to expand...

Good luck on the clones. That will make life easier if you can get good at that.

Something that im going to have to get better at to save a month in the cycle.

Reveg looks good, they do take awhile to stabilize.

Yodaweed said:

Did you uppot her when you reveged? from my experience with reveg they like to be uppotted as soon as possible to give them more room for new roots to grow .

Click to expand...

Uh. No. I didnt think about that. I'll have to prepare the new pot. I did however take it out to put a couple inches of fresh soil on the bottom.

I'll get right on it.

Also don't forget a small amount of bloom nutes while you transition, mainly phosphorus. I did this and noticed a way faster re veg. Just "wean" her off like you would N in the flower transition.

She's a bit yellow. But, I up potted her. Got another couple inches of fresh ROLS on the bottom. And a little on top and sides too. I'm thinking about going with a 10 gallon smart pot next.

Might even try getting a clone to take hold in that. Or just try a new strain. Got some pinepple chunk I could try. I'm hoping one of these clones takes hold though.

I decided to drop 1 Pineapple Chunk into a fresh jiffy pellet. I wanted to try something I can read about and compare against other people's efforts. That way I've got a clue as to what I should expect. Rather than playing the guessing game the whole grow.

I'm debating whether to put the old gal back into her original home. And try the new bean in the bigger setup. That way I've got more room to veg it out. And thus increase the overall potential harvest.

It's not really a big deal if the older one only yields a mediocre amount in that space. The quality of the product was well worth the wait... Not that I let it reach full potential.

I'm considering doing a scrog in that larger space too. And it turns out I've got just enough room to fit two of those square buckets if I wanted to.

Looks like my super soil is way too hot. She's going yellow and crispy all of a sudden.

Thing is I don't have anymore regular soil to cut it with. I used the last of it to refill her old container. And that's being used on the Pineapple Chunk.

Might have to cut her down. And start again. I don't have the funds to do much right now.

I would say I could plant her outside but I've got a four legged nuffwit who eats them. And it's really cold at night right now. Like 5°c on average.

Nugachino said:

Looks like my super soil is way too hot. She's going yellow and crispy all of a sudden.

Thing is I don't have anymore regular soil to cut it with. I used the last of it to refill her old container. And that's being used on the Pineapple Chunk.

Might have to cut her down. And start again. I don't have the funds to do much right now.

I would say I could plant her outside but I've got a four legged nuffwit who eats them. And it's really cold at night right now. Like 5°c on average.View attachment 3973677

Click to expand...

give it a good leaching. Can you mix that soil with 1/2 and 1/2 from the back yard- doesnt need to be fantastic soil- just dirt will do. Old dead pot plants hangin around?

I could probably find something. I'm just not in the mood to be fixing shit right now.

I haven't lost all logic just yet. I found two decent sized pots to scrap. Soil has been mixed and thinned.

Unfortunately I had to damage her roots to get the old soil out. If she recovers. That's great. If not. Then I guess I know how not to do things for next time.

Might even leave her unbound for a while. See what she does.

I wouldnt worry about any damage to the roots. Some people cut a good amount off the root ball when transplanting.

See in a week if she recovers from the hot soil.

She doesn't seem too stressed by the move. There's no noticeable wilting. Just had a peek during the last bit of her dark cycle.

Attempting a scrog.

Nugachino said:

600g each? Just trying to work out how heavy everything will be all up. So I know what tent I'll need.

Click to expand...

What do I need to make those cobs

jonathan17 said:

What do I need to make those cobs

Click to expand...

Mine or the other guy's?

Mine are made from two Bridgelux Vero 29C, 69.4v COBs. Powered by a 200w, 1400mA driver. The cooling is provided by the two passive 14cm aluminium pin sinks.

They're covering a 3sq ft area.

I picked the warmer 3500k chips due to most people saying I'd appreciate the extra red come flowering time.

Nugachino said:

Mine or the other guy's?

Mine are made from two Bridgelux Vero 29C, 69.4v COBs. Powered by a 200w, 1400mA driver. The cooling is provided by the two passive 14cm aluminium pin sinks.

They're covering a 3sq ft area.

I picked the warmer 3500k chips due to most people saying I'd appreciate the extra red come flowering time.

Click to expand...

Cheers thanks

Day 1 of a little Chunky Pineapple goodness poking its head out.

I'm gonna scrog this one in my minicab. And if my old one dies before this one reaches the screen. Then I'll swap the buckets around. And run her in that. Also scrogged.

Worked on my minicab today. Decided to open up the scrog mesh further. And add an option to hang the light a few cm closer. Not sure if it'll do much. But, I guess it can't hurt to have the option. Thinking about making the chains a bit longer than that though. Not sure. Oh and I pushed the fan as far back on its stand as I could get it to go. That way it's blocking less light. But still doing its job.


This is the old girl a few days after having about 20L of rain water poured through her medium. At first she clawed right down. Now she seems to be recovering a bit. Though. I did get an influx of those little gnat fuckers. Which I promptly sprayed with a neem solution.


Not that I want to sit there and cut the bigger screen. But, if I should. I will.

The original mesh size is 1 inch. The modified size doubles it. I don't want to measure and or nail any other crap. Id rather deal with this mesh. Should I cut it to 2 inch holes, or leave it as is with the 1 inch holes?

Let me know what you think.

Also- Pen!s

Nugachino said:

Worked on my minicab today. Decided to open up the scrog mesh further. And add an option to hang the light a few cm closer. Not sure if it'll do much. But, I guess it can't hurt to have the option. Thinking about making the chains a bit longer than that though. Not sure. Oh and I pushed the fan as far back on its stand as I could get it to go. That way it's blocking less light. But still doing its job.
View attachment 3976594

This is the old girl a few days after having about 20L of rain water poured through her medium. At first she clawed right down. Now she seems to be recovering a bit. Though. I did get an influx of those little gnat fuckers. Which I promptly sprayed with a neem solution.
View attachment 3976597 View attachment 3976598

Not that I want to sit there and cut the bigger screen. But, if I should. I will.

The original mesh size is 1 inch. The modified size doubles it. I don't want to measure and or nail any other crap. Id rather deal with this mesh. Should I cut it to 2 inch holes, or leave it as is with the 1 inch holes?

Let me know what you think.

Also- Pen!s

Click to expand...

Woah so you actually got it re-veg. I hate to say it but I was begging to doubt there. Did you get it to clone?