looking for Meijiu A8 650W reviews

[bk78]

can you drop the link?

I can’t right now I’m at work. Google Meijiu 240 kit.

 

[MRphotoN]

I can’t right now I’m at work. Google Meijiu 240 kit.

thanks

 

[SourDeezz]

I might have to reconsider these lights, do they really run at 12.5amps each unit?

 

[bk78]

I might have to reconsider these lights, do they really run at 12.5amps each unit?

No

5.4A at 650w each.

 

[p0opstlnksal0t]

5.4a @120v
2.7a @240v

 

[SourDeezz]

Awesome, thanks guys, Meijiu it is!

 

[Sleez]

I just got em and I’ll say the only downfall is the lights will go out when you raise them unless you raise all four corners at the same time. It’s really annoying. Other than that it’s a solid light.

 

[getogrow]

I just got em and I’ll say the only downfall is the lights will go out when you raise them unless you raise all four corners at the same time. It’s really annoying. Other than that it’s a solid light.

DO NOT move them while on. These connections are junk! ive already had a pcb burn out on me in one fixture and its very new still. You HAVE to raise one side at a time or turn them off. The lights are GREAT but the connections are super cheap junk. i had to pre bend mine to even get it installed.

 

[getogrow]

No

5.4A at 650w each.

View attachment 4782859View attachment 4782860

now that i look at this closer, my inventronics drivers are not putting out 650w...... 2 of them is pulling 1230 watts from the wall, both maxed out. Either someone lied to me about the inventronics or there is a problem that im not too concerned about ?

 

[bk78]

now that i look at this closer, my inventronics drivers are not putting out 650w...... 2 of them is pulling 1230 watts from the wall, both maxed out. Either someone lied to me about the inventronics or there is a problem that im not too concerned about ?

I haven’t tested mine since the day I got them. I will this weekend and let you know.

 

[bk78]

now that i look at this closer, my inventronics drivers are not putting out 650w...... 2 of them is pulling 1230 watts from the wall, both maxed out. Either someone lied to me about the inventronics or there is a problem that im not too concerned about ?

Have you tried testing each individually? Might be in the aux cable itself connecting the drivers possibly?

 

[getogrow]

95% of 650 watts is 617.5w x 2 = 1235.....i suppose i cant complain. Im just used to the MW drivers being a c hair underrated.

 

[getogrow]

Have you tried testing each individually? Might be in the aux cable itself connecting the drivers possibly?

Same as you sir , i played with them for a couple days before installing them and aint messed with um since i fixed the burnt pcb. quick fix , didnt even think about testing anything when i did that.

 

[getogrow]

This pcb was inside the a8 fixture.... i lost 4 of my bars one day and took it apart to find this....i just threw this away and put all the wires together with wirenuts.

 

[Sleez]

DO NOT move them while on. These connections are junk! ive already had a pcb burn out on me in one fixture and its very new still. You HAVE to raise one side at a time or turn them off. The lights are GREAT but the connections are super cheap junk. i had to pre bend mine to even get it installed.

Hopefully I didn’t fuck mine up. I’m at the point where I don’t need to move them up anymore. But in the future I will turn them off.

 

[getogrow]

Hopefully I didn’t fuck mine up. I’m at the point where I don’t need to move them up anymore. But in the future I will turn them off.

Nah you didnt hurt them at all but try not to do it again. If you do one side at a time and perfectly raise them equally then you can go about 10" up on each side at a time. sucks but they are great lights.

 

[SourDeezz]

@canope Did you have this problem as well with your lights?

 

[SourDeezz]

I was going to put in an order for 100 of the F8 lights, but if I have to open each one and have them re-wired , I might have to go elsewhere.

 

[getogrow]

I was going to put in an order for 100 of the F8 lights, but if I have to open each one and have them re-wired , I might have to go elsewhere.

Ask @bk78 i believe he has some f8's and they are way better built then the a8's. They may or may not have the same pcb in there to separate each strip. Its a very easy work around but 100 of them is different. Im not sure the price can be beat even with rewiring but i may be wrong.

 

[getogrow]

Also , there are 2 of those pcb's per light. I only fixed one out of 3 and may never have to replace the other 3. They may last forever but yes its always good to know these things. (these pcb's do nothing more then a wago)