Random Jabber Jibber thread

cutting the heads off of a shit-ton of strike anywhere matches and putting them in a pop bottle and dropping a match in
Hacksaw the end off a spent co2 cartridge and load them match heads in there. **Pack it too tight it might explode** . I would finish it off with a little rip of duct tape wedged in between the last match heads as a fuse
Makes a straight up missile. That will fuck up cinder block wall don’t ask how I know.

A length of galvy pipe through a hole in a piece of plywood to protect your head. Was my favorite way to launch them things. Good times.
 
Masking tape works well as a delayed fuse. :roll:
We used to fill balloons with oxy acetylene, wrap them in newspaper (the fuse), light the newspaper and run. One time the flames licked the balloon sooner than expected and rapid expansion of gas seemed to lift me off the ground - ears rang for a while too. Zero stars, do not recommend.

My brother felt wrongfully accused of cheating on a shop exam so he took the teacher's keys and melted them together into a blob with a torch.
 
We used to fill balloons with oxy acetylene, wrap them in newspaper (the fuse), light the newspaper and run. One time the flames licked the balloon sooner than expected and rapid expansion of gas seemed to lift me off the ground - ears rang for a while too. Zero stars, do not recommend.

My brother felt wrongfully accused of cheating on a shop exam so he took the teacher's keys and melted them together into a blob with a torch.
Welding class :clap:
 
View attachment 5473786
That plastic on the top is hard and randomly goes for the skull of inattentive children...
Dude i’m gonna have the best slip n slide for next summer so i can show off to the grandaughters. The grasshoppers didn’t show up so that means i got about 7 years of a lawn, at least. I dont think a regular cycle will kill an established lawn. This last one was bad everywhere around here. Gonna make a lawn this fall. The landing zone will be the lawn :-)
 
Sadly, the American chestnut tree that was nearing 25 years years old and produced nearly 25 gallons of nuts with husk on two years ago has succumbed to something, causing its death. Only 15 seeds were viable, but none of them sprouted - all rotting in the ground last year.

Screenshot_20250717_124852_Gallery.jpgScreenshot_20250717_124924_Gallery.jpg

The adjacent northern red oak seems OK for the most part but too is showing signs of something wrong.

Screenshot_20250717_124949_Gallery.jpg
 
Sadly, the American chestnut tree that was nearing 25 years years old and produced nearly 25 gallons of nuts with husk on two years ago has succumbed to something, causing its death. Only 15 seeds were viable, but none of them sprouted - all rotting in the ground last year.

View attachment 5473924View attachment 5473925

The adjacent northern red oak seems OK for the most part but too is showing signs of something wrong.

View attachment 5473926
 
These 150 micron paint filters are inexpensive and perform well to strain plant matter from extractions. Waiting a few days allows any sediment to settle to the bottom, then pour off to another mason jar and add sunflower lecithin. Purple Urkle sleep aid in the MB machine. 4hrs at 160° 148g into 1.12litres MCT oil.

20250718_140754.jpg
 
These 150 micron paint filters are inexpensive and perform well to strain plant matter from extractions. Waiting a few days allows any sediment to settle to the bottom, then pour off to another mason jar and add sunflower lecithin. Purple Urkle sleep aid in the MB machine. 4hrs at 160° 148g into 1.12litres MCT oil.

View attachment 5474034
How much do you need to take at that amount of green. Curious the amount of milligrams of THC.
 
How much do you need to take at that amount of green. Curious the amount of milligrams of THC.
If your starting material is 20% THC, that's 200mg per gram. With 148g that's a total of 29 600mg. Using an extraction coefficient of .89, there'd be about 26 000mg in the batch. 26 000mg divided by the 1 120ml = ~23mg/ml. I'd add 4 tablespoons of liquid sunflower lecithin per litre which brings the numbers down a bit but increases the bioavailabilty. Some people use .5ml and some use a full dropper (1ml) for a restful sleep.

For the non stoners, tinctures work well but for the seasoned consumer, 1ml may not suffice.
 
If your starting material is 20% THC, that's 200mg per gram. With 148g that's a total of 29 600mg. Using an extraction coefficient of .89, there'd be about 26 000mg in the batch. 26 000mg divided by the 1 120ml = ~23mg/ml. I'd add 4 tablespoons of liquid sunflower lecithin per litre which brings the numbers down a bit but increases the bioavailabilty. Some people use .5ml and some use a full dropper (1ml) for a restful sleep.

For the non stoners, tinctures work well but for the seasoned consumer, 1ml may not suffice.
Thanks your way ahead of me in all things,I value your knowledge as always. I just finished my first indoor harvest and have a tincture recipe that I've used for two years now and this one is not doing it. I always make same way decarbed bud in grain, put in freezer for five days shaken few times a day for 2 minutes. I grind up about 14 grams in 8 ounces of grain then evaporated down to 2 ounces. I've always take 1ml a dropper full at night and usually still feel in mournings. This harvest i can smoke a bowl and feel alright but not feeling tincture so made another batch with double and still nothing. Just weird, kritcal Kush.
 
Thanks your way ahead of me in all things,I value your knowledge as always. I just finished my first indoor harvest and have a tincture recipe that I've used for two years now and this one is not doing it. I always make same way decarbed bud in grain, put in freezer for five days shaken few times a day for 2 minutes. I grind up about 14 grams in 8 ounces of grain then evaporated down to 2 ounces. I've always take 1ml a dropper full at night and usually still feel in mournings. This harvest i can smoke a bowl and feel alright but not feeling tincture so made another batch with double and still nothing. Just weird, kritcal Kush.
Yeah, it's can be hit and miss with extractions, as some varieties work better than others. My Chem91 x OG is really fun in brownies but the Chem91 x C99 not so much. Both great smoke but quite different in extractions for reasons unknown to me.
 
Back
Top