crisnpropa
Well-Known Member
Some photos of the outdoor silver sunshine grow product.
bodhi seeds
- Thread starter dankydonky
- Start date
Bakersfield
Well-Known Member
Tripping With Rocks
Well-Known Member
Got your toes! lol
dakilla187
Well-Known Member
I use a oxycloner for 2 years near continious, I plumbed it with 2 fittings that pump to a water chiller....That being said im currently going through a problem where 2 batches had 5% success rate...
I was nearly done steralizing yesterday and I weighted down the cover with a gallon of lost coast therapy and I came back and wtf.....My gallon self imploded and who knows how much spilt into my cloner.....So today I replaced all the tubing to my pumps....
I also broke a half inch fitting on my chiller, the very fitting thats been in my amazon cart for a year for $8 that I watched get sold out, thank god i had a two 3/4 fitting and 2 ft of new hose...Next time cut the hose dont pull and twist
Im so stressed out as im over a month behind in clones.. Sometimes it clones better with nothing but ph water used.....Use pool shock to make your own clear rez....You start with 100% success and it will slowly deteriorate so you need to steralize...I circulate bleach after every run but needless to say I still get occassional problems and im currently up shit creek with a ton of new csi gear and no clones
I also stopped adding any nutrients to my cloner, I change my water on friday and monday and wash my airlines and tub at the same time
Warm water is faster roots but possibly more problems
How to Sterilize your Cloner...THE RIGHT WAY!
If you follow the PermaClone methods, there is no need to rinse or break-down your system between cycles. It's a dump, circulated sterilizer of choice, sterilize collars, and start your next cloning cycle! Don't shelf your cloner! Don't switch to peat plugs or rockwool! ..I'm here to help...
www.permaclone.com
Last edited:
Not sure if it was repeated here, but I saw on another forum that some folks are thinking Bodhi has unlocked the seventh seal of RKS with the Hashplant D. Take that with a massive grain of salt. That said, I understood folks including Skunk VA, Dominion, etc. were heading in that direction with their Figure Four work before Dominion got in trouble.
copkilller
Well-Known Member
Nanner? Seeds? Should i chop it?
cluster funk - day 39 flower
cluster funk - day 39 flower
dankbydrew
Well-Known Member
Dang, certainly looks like a nanner if it’s not a tight bundle of pistils.
Bakersfield
Well-Known Member
That would be a step in the right direction, to get an RKS pheno.
I've got 2 Dominion Skunk phenos that are skunky and a Americanna x Black Domina from AK Beanbrains that is on another level skunky as well.
I have not seen the other forum discussing gash d yet, and really debated saying anything about it, but every pheno i have had so far is very similar to the rks in taste at least. some where extremely botrytis susceptible and some where resistant. The susceptible ones looked liked the old rks. The high is very similar but its been long time. I have been running 2 of the resistant phenos trying to decide which one to keep for awhile. If you been thinking about getting them you better hurry up, when word gets out they will be gone quick probably.
I spent the early 90s trying to convince a grower of rks to open pollinate them when he was down to the last couple hundred. He didnt listen and i still give him shit about it.
I spent the early 90s trying to convince a grower of rks to open pollinate them when he was down to the last couple hundred. He didnt listen and i still give him shit about it.
TheHerbalConnoisseur
Well-Known Member
It’s all good! Sorry I forgot to respond. Growing them now, so stay tuned! I’ll be sure to let you know
TheHerbalConnoisseur
Well-Known Member
Sucks you’ve had a streak of bad luck but I’m sure you’ll figure it out. What temp do you run your water?I use a oxycloner for 2 years near continious, I plumbed it with 2 fittings that pump to a water chiller....That being said im currently going through a problem where 2 batches had 5% success rate...
I was nearly done steralizing yesterday and I weighted down the cover with a gallon of lost coast therapy and I came back and wtf.....My gallon self imploded and who knows how much spilt into my cloner.....So today I replaced all the tubing to my pumps....
I also broke a half inch fitting on my chiller, the very fitting thats been in my amazon cart for a year for $8 that I watched get sold out, thank god i had a two 3/4 fitting and 2 ft of new hose...Next time cut the hose dont pull and twist
Im so stressed out as im over a month behind in clones.. Sometimes it clones better with nothing but ph water used.....Use pool shock to make your own clear rez....You start with 100% success and it will slowly deteriorate so you need to steralize...I circulate bleach after every run but needless to say I still get occassional problems and im currently up shit creek with a ton of new csi gear and no clones
I also stopped adding any nutrients to my cloner, I change my water on friday and monday and wash my airlines and tub at the same time
Warm water is faster roots but possibly more problems
How to Sterilize your Cloner...THE RIGHT WAY!
If you follow the PermaClone methods, there is no need to rinse or break-down your system between cycles. It's a dump, circulated sterilizer of choice, sterilize collars, and start your next cloning cycle! Don't shelf your cloner! Don't switch to peat plugs or rockwool! ..I'm here to help...
View attachment 4830838
As far as just running straight PH’d water with success, I’ve read a lot of people saying that that is the case or even straight tap. Ive also read to dip fresh cuttings in 99%iso for 10-15sec before putting em into pucks. Still up in the air as to which method I’ll use but that’s what I’m leaning torwards atm. Seems like the least possibility of problems but this will be a first attempt for me so I’ll just have to see what works for me.
dakilla187
Well-Known Member
I dip in clonex and into the pucks they go, im firing her up tomorrow, i pre treated my plants for pm today....I been running at 77 degrees, if I go colder it takes too long to root...I might not use my chiller tomorrow im debating as its def not summer time here but I still spend most of the day with no shirt lol....
dakilla187
Well-Known Member
Black Triangle...from clone....clone was way too bushy and attracted pm, unlike the seed plant(maybe i took it in early flower?) hoping her clone will bring it back to normal....Rock hard like the original
Leatherneck0311
Well-Known Member
I just used the stuff it cane with. And when I ran out I cleaned the unit out with EM5 from build a soil. Then I switched to aloe and coconut , I never checked temp or ph. I cleaned it every 2 days because aloe turns gooey if you don’t empty it out and refresh. It makes roots the same way as the stuff that came with the box. You’ll just have to clean more often. Do whatever it’s easy as hell.
Blueberry bref
Well-Known Member
They are called e z cloners for a reason. I trim up the clones I'm going to take on the plant, snip them into a cup of water, and then into clean collars. I keep a little clonex solution on hand to use as a foliar and to splash a little in the tank. I swap water every suday.
Healthy plants in, healthy clone out.
Senokai
Well-Known Member
Looks fantastic. I'm sitting on a pack of Black Triangle that I haven't pulled the trigger on yet.
AdvancedBuffalo
Well-Known Member
I was going to sit this drop out but the mystique of the lush cut got the best of me. At least 2 of these packs are getting popped. Likely 3! Gotta find some momma leaners.