Chitosan Oligosaccharide dosage?

PsyCLown

Member
@Rurumo so to summarize:

Chitosan is used as either a foliar or soil drench from early veg until harvest (at a dose of 200ppm to 500ppm)
Aspirin water is used later in veg to early flower (what dosage?)
Triacontanol you use alfa alfa meal, i know it can be used as either foliar or soil drench commonly this is used from early veg until harvest as well. I believe dosage should be between 25ppm to 100ppm and varies depending on whether it is a foliar feed or soil drench.
 

DrKiz

Well-Known Member
@Rurumo so to summarize:

Chitosan is used as either a foliar or soil drench from early veg until harvest (at a dose of 200ppm to 500ppm)
Aspirin water is used later in veg to early flower (what dosage?)
Triacontanol you use alfa alfa meal, i know it can be used as either foliar or soil drench commonly this is used from early veg until harvest as well. I believe dosage should be between 25ppm to 100ppm and varies depending on whether it is a foliar feed or soil drench.
I’ve been playing with water soluble Triacontanol off of Alibaba.
$25 USD for a kilo of TC 1.5%EP. shipping costs more than the TC.
They suggested a gram per gallon. I use 20% of this.
Playing with application timing still.
 
@Rurumo so to summarize:

Chitosan is used as either a foliar or soil drench from early veg until harvest (at a dose of 200ppm to 500ppm)
Aspirin water is used later in veg to early flower (what dosage?)
Triacontanol you use alfa alfa meal, i know it can be used as either foliar or soil drench commonly this is used from early veg until harvest as well. I believe dosage should be between 25ppm to 100ppm and varies depending on whether it is a foliar feed or soil drench.
Triacontanol is best used as a foliar spray but not in such high concentrations. I never go higher than 1 ppm. Most papers recommend 0,01-0,1 ppm to have the best effect for several species (there's no research for cannabis but some other species) and almost all apply it as a foliar spray. Everytime i sprayed with concentrations above 1 ppm some strains developed strange growth. There came 3 shoots out of some nodes instead of 2 (mainly seen on mother plants) and such things. It had no adverse effect though and after a few weeks the growth pattern normalized. I spray every 1-2 weeks until week 3.
 
I’ve been playing with water soluble Triacontanol off of Alibaba.
$25 USD for a kilo of TC 1.5%EP. shipping costs more than the TC.
They suggested a gram per gallon. I use 20% of this.
Playing with application timing still.
1,5 % and water soluble? That sounds strange. Is there information about what else is in there? Or is that already a stock solution? Normally it is sold in concentrations of >90 % (5g of it last an eternity) and is per se not water soluble. You have to use polysorbate 20 (also called tween 20, a nonionic surfactant that is also a very good and cheap wetting agent btw) for it to dissolve in water for example (although there are some other ways like using methanol as a solvent iirc). Since it is used in tiny concentrations it is also best to make a stock solution of maybe 100 ppm (that corresponds to roughly 0,11g TRIA 90% per liter) and then use 10mL of that per liter to get a 1 ppm foliar spray. Instructions for preparation using Tween 20 can be found on YouTube.
 

DrKiz

Well-Known Member
1,5 % and water soluble? That sounds strange. Is there information about what else is in there? Or is that already a stock solution? Normally it is sold in concentrations of >90 % (5g of it last an eternity) and is per se not water soluble. You have to use polysorbate 20 (also called tween 20, a nonionic surfactant that is also a very good and cheap wetting agent btw) for it to dissolve in water for example (although there are some other ways like using methanol as a solvent iirc). Since it is used in tiny concentrations it is also best to make a stock solution of maybe 100 ppm (that corresponds to roughly 0,11g TRIA 90% per liter) and then use 10mL of that per liter to get a 1 ppm foliar spray. Instructions for preparation using Tween 20 can be found on YouTube.
Not sure but I bought a kg and was told one gram per gallon. Basically the gram you put in has 15mg of Tria. It’s pretty much a stock solution already in powdered form. Water soluble and have used through a full run now quite successfully... although at a much lower dosage than 1 gram a gallon.
 
Not sure but I bought a kg and was told one gram per gallon. Basically the gram you put in has 15mg of Tria. It’s pretty much a stock solution already in powdered form. Water soluble and have used through a full run now quite successfully... although at a much lower dosage than 1 gram a gallon.
Ok, if it works then everything is fine.
Do you use it in fertigation or as a foliar? And have you measured EC and/or Ph after addition? Just curious because if the main ingredient is some kind of filler/filling salt it should raise the EC quite a bit and could possibly throw your ratios off or even be detrimental if consisting of sodium salts etc. The filler sure could also be anything inert or a surfactant etc, just curious...
 

DrKiz

Well-Known Member
Ok, if it works then everything is fine.
Do you use it in fertigation or as a foliar? And have you measured EC and/or Ph after addition? Just curious because if the main ingredient is some kind of filler/filling salt it should raise the EC quite a bit and could possibly throw your ratios off or even be detrimental if consisting of sodium salts etc. The filler sure could also be anything inert or a surfactant etc, just curious...
Sorry for the late response. I'm not on here as much as I used to be.

I definitely does raise EC, although I haven't noticed any ill effects. I've used it now on two full runs. Results were amazing.
It would mostly be filler, of which I'm not sure. The highest dose I've went was about 1/2 gram per gallon. That bumped me up about 100 ppm. I go easy on my EC.. pretty much 1.2 straight through flower... coco dtw... so the extra 100 isn't hurting anything.

1kg bag last a long long time. $23 USD for the bag.. like $50+ for the shipping.

I really like Advanced Nutrients Bud Explosion and Bud Factor X. Let's face it, they work well.. but expensive for easy to source ingredients.

I buy all my nutrients in 25lb bags.. Jacks 3-2-1. Won't pay for liquid.

Bud Explosion - Kelp and Tria
Bud Factor X - Chitosan, Salysilic Acid (and maybe Jasmonic Acid and a couple other things I'm also sourcing at the moment too thats in it)

I scored multiple KG's of both off Alibaba. Chitosan really brings out the frost, but if you hit it too early bud size and density will suffer alot.

I use chitosan in the last couple weeks only. I use tria throughout in varying amounts, and drop it the last two weeks.

I've found running Tria too late delays maturity and maybe causes foxtailing... foxtailing could have been me on that grow or stain specific.

My 2 cents.
 

FluffsTravels

Well-Known Member
I've been on a Alibaba rabbit hole. Suppliers that are "gold suppliers" are safer. If you ask for a COA you'll get specs. One of the labs I spoke with said of Chitosan, " All molecular weights are useful. The smaller the molecular weight, the better the effect. For example, when soaking seeds, small molecular weight will protect the seeds better." He offered Chitosan with molecular weight of 1000. What I already bought was 1811. I get offered wild price differences. One vendor for a certain product started at $90 but came down to $13.50. You can haggle but this felt uncomfortable.

Also, I was considering Harpin Protein as well. Unsolicited, a seller of Dora Immune, Harpin Protein, said Chitosan works better. ?
 
Last edited:

FluffsTravels

Well-Known Member
I know the person that made the post below hasn't been active in a long time. Same with some other members in this post. I thought maybe someone else might know about this...
I bought some powered Chitosan Oligosaccharide with a molecular weight of 1800; which falls within the agricultural category of 1000-2000. Next time I'll purchase closer to 1000 as I've read it's more easily available to the plants. However, I just did a trial mix in attempt to get to 500ppm. 4 grams only gave me 140ppm. I would need 14.2 grams to get to 500ppm. This doesn't seem correct and it would make using this product very expensive; especially in a soil drench. The chart below states 1.894 grams would get me to 500ppm. I've contacted the vendor to see if they can explain the issue. I simply weighed grams in a gallon of plain water and whisked in the Chitosan. Am I supposed to be doing or adding something else? My water comes from a deep, clean aquifer that runs between 10-60ppm depending on the time of year.

 

Aeroknow

Well-Known Member
I know the person that made the post below hasn't been active in a long time. Same with some other members in this post. I thought maybe someone else might know about this...
I bought some powered Chitosan Oligosaccharide with a molecular weight of 1800; which falls within the agricultural category of 1000-2000. Next time I'll purchase closer to 1000 as I've read it's more easily available to the plants. However, I just did a trial mix in attempt to get to 500ppm. 4 grams only gave me 140ppm. I would need 14.2 grams to get to 500ppm. This doesn't seem correct and it would make using this product very expensive; especially in a soil drench. The chart below states 1.894 grams would get me to 500ppm. I've contacted the vendor to see if they can explain the issue. I simply weighed grams in a gallon of plain water and whisked in the Chitosan. Am I supposed to be doing or adding something else? My water comes from a deep, clean aquifer that runs between 10-60ppm depending on the time of year.
The ppm you’re after doesn’t register as EC/ppm/tds because Chitosan is an organic molecule.
 
Last edited:

Aeroknow

Well-Known Member
Awesome. Thank you. I'll go with your chart, and thank you for that.
Any recommended dosage and application rates?
Well i first started using it battling the fucked up HLVd at 500ppm. And then stuck with it for quite a while at 200. I think 200 is supposed to be good just to reap some benefits from the stuff. I still believe it did good. I only use megacrop 1part these days. I don’t really care for most of the crap that’s put in there but has chitosan O so i like that but not sure how much of it is in megacrop
 

FluffsTravels

Well-Known Member
Well i first started using it battling the fucked up HLVd at 500ppm. And then stuck with it for quite a while at 200. I think 200 is supposed to be good just to reap some benefits from the stuff. I still believe it did good. I only use megacrop 1part these days. I don’t really care for most of the crap that’s put in there but has chitosan O so i like that but not sure how much of it is in megacrop
Thanks again.
Yikes. I thought we had HpLVD, but testing proved negative, thank god, and the problems faded away in the next clone wave. I hope you got over it or rid of it. I feel like every time I take it something new, rather than the hassle of seeds, it comes with bugs, pm or other problems. It's getting old.

As far as chitosan, trying to stimulate some extra frost but also fight pm and bud mold. Did you soil drench or spray?
 

Aeroknow

Well-Known Member
Thanks again.
Yikes. I thought we had HpLVD, but testing proved negative, thank god, and the problems faded away in the next clone wave. I hope you got over it or rid of it. I feel like every time I take it something new, rather than the hassle of seeds, it comes with bugs, pm or other problems. It's getting old.

As far as chitosan, trying to stimulate some extra frost but also fight pm and bud mold. Did you soil drench or spray?
I always applied as a soil drench.
I’ve fought that shit a few times. It sucks real bad
 
Last edited:

goyum

Member
I've been on a Alibaba rabbit hole. Suppliers that are "gold suppliers" are safer. If you ask for a COA you'll get specs. One of the labs I spoke with said of Chitosan, " All molecular weights are useful. The smaller the molecular weight, the better the effect. For example, when soaking seeds, small molecular weight will protect the seeds better." He offered Chitosan with molecular weight of 1000. What I already bought was 1811. I get offered wild price differences. One vendor for a certain product started at $90 but came down to $13.50. You can haggle but this felt uncomfortable.

Also, I was considering Harpin Protein as well. Unsolicited, a seller of Dora Immune, Harpin Protein, said Chitosan works better. ?
Do you mind DMing me the link for that 1000 molecular weight chitosan? I tried searching on alibaba for awhile and couldn't find it.
 
Top