colocowboy
Well-Known Member
If you add a couple supplemental leds you can keep “lumen maintenance” net 0.
Club 315w lec
- Thread starter bob223
- Start date
F1_Grower
Active Member
Hi RIU Community!
Just wanted to give quick update how my v-scrog 315 lec is comming along. Check it out in this thread on another topic re vertical growing i just posted on!
Cheers
Just wanted to give quick update how my v-scrog 315 lec is comming along. Check it out in this thread on another topic re vertical growing i just posted on!
Is this vertical growing ?
What make trimming and maintenance work on the plants easier is being able to remove them from the tent to work on them. This pic is with the plant sitting on the pre rez barrel prior to 21st day defo. After the 21st day defo and before going back in the tent. Seven days later, day 29 of...
www.rollitup.org
Cheers
PJ Diaz
Well-Known Member
F1_Grower
Active Member
Cobs?
F1_Grower
Active Member
Thats the way to do it, scattered is next room i want to setup reconnecting my 315s into their hoods. And In between lec's put leds.
PJ Diaz
Well-Known Member
HLG QB96 elite v2's
Lilwatt
Well-Known Member
So I’m probably about to get two of these an try it out but I was just wondering like what’s a good brand to go with price wise that’s not gone kill my pocket an how are they on heat I’ll like to find a brand that don’t throw off so much heat cause imma be using these in a five by five tent in my room
PJ Diaz
Well-Known Member
The heat is gonna be the same for every 315w lamp regardless of brand.
Lilwatt
Well-Known Member
So is the heat that bad cause I been doing a lil reading an one guy said his was worst then his 600 watt hps
PJ Diaz
Well-Known Member
That guy doesn't know what he's talking about. Heat is based on watts burned regardless of how they are burned. It's a simple formula really, every 1 watt equals 3.41 btu's.
CrunchBerries
Well-Known Member
I just purchased a 5x5 and I’m thinking of getting the timber trio of daises to go between two 315 cmh. Each daisy is a 100W COB. One cmh bulb is 3100, the other 4K. Thoughts? Any help is appreciated
colocowboy
Well-Known Member
Sounds descent to me, will be plenty of light and room to address lumen maintenance out to 5 years with that much led.
CrunchBerries
Well-Known Member
Thanks for your response man. Was looking at a couple HLG 135W QB V2 RSpec led kits also but they are a bit pricier.
colocowboy
Well-Known Member
The light is more diffuse from qbs which is nice for even spread. It’s all just choices, personally I like to wash in excess if it’s dimmable, remember running leds soft increases their life span. It’s a nice balance of efficiency, performance and durability.
CrunchBerries
Well-Known Member
Thanks again man for your time
CrunchBerries
Well-Known Member
What size driver are you using to run those? I was looking to run three Qb96’s with this driver hlg320h-54a. I’m going to call HLG today, but do you know of any resources for how-tos on building these things. I appreciate your time- CrunchBerries
colocowboy
Well-Known Member
DIY with Quantum Boards
Starting a new thread for DIY build with Quantum Boards. Please feel free to post your Mid-Power LED based designs here. Multiple LED Strips fine too. Related Threads https://www.rollitup.org/t/quantum-boards-grow.927065/ https://www.rollitup.org/t/pre-drilled-heatsink-for-boards.925811/...
www.rollitup.org
PJ Diaz
Well-Known Member
That driver will work perfectly with 3 QB96's. There's not much to building them really, just connect the boards to the drivers in parallel, and then hang them.
CrunchBerries
Well-Known Member
Thanks bud!