Rrog
Well-Known Member
There are a few lite-tite louvers out there, but expensive at $30 for an 8x8. https://www.bhphotovideo.com/c/product/43104-REG/Doran_PRDV99_DV_99_8x8_Light_Tight.html
There are a few good DIY vent threads out there:
https://www.icmag.com/ic/showthread.php?t=164913
https://www.icmag.com/ic/showthread.php?t=135524
https://www.420magazine.com/forums/do-it-yourself/252205-diy-light-louvers.html
I thought I'd open this up in case there were any 2017 opinions on these older threads. I'm looking to make metal fins - maybe drywall corner bead. Could do a V. Could go a double V.
These will be in 2x4 walls, so I have some depth - 4 1/2" inches - to use if I need to.
Thanks for any thoughts.
There are a few good DIY vent threads out there:
https://www.icmag.com/ic/showthread.php?t=164913
https://www.icmag.com/ic/showthread.php?t=135524
https://www.420magazine.com/forums/do-it-yourself/252205-diy-light-louvers.html
I thought I'd open this up in case there were any 2017 opinions on these older threads. I'm looking to make metal fins - maybe drywall corner bead. Could do a V. Could go a double V.
These will be in 2x4 walls, so I have some depth - 4 1/2" inches - to use if I need to.
Thanks for any thoughts.