Hlg 600 r spec

dtracy11191978

Well-Known Member
Having issues with heat in the 4x4 up to about 88° I have a carbon fi16343280285372192767170937427539.jpglter 4 inch vivosun inline fan on high. Would it be better for me to get a 6 inch setup instead of the 4? Here's the setup. It there any way to get the driver outside the tent?
 

crownpoodle

Active Member
Same light. Cloudline T6. The T6 has hi/low temp and humidity alarms. It's what was recommended by SmokinJoe on Z-labs. I'm real happy with both the light and exhaust system. Recently had an issue and I re-did my wiring. Zip tied things up better. My temp/rh sensor was moved a little. Not much. Reads a few degrees cooler now. Which one's correct? Did some searching and you can justify putting that sensor wherever you want. Mine is about 6" above the canopy, but not directly below the lights. Another on the back wall in the tent. Gives me a range. As long as it's not too hot or cold for too long,I won't chase temps. My tent is in a metal shed in the direct sun. Instead of chasing temps, I got a couple sheets of 1.5" insulation. Works great. Going to help when it gets cold.
 

dtracy11191978

Well-Known Member
At what wattage? That tent looks too short for 600w.
It's a 6 1/2 foot Secret Jardin DR120. I had to lower the power of the light and bring it down some so it can have the same intensity on the plants. They're going into week 4 of flower. The temp is about 86. Still alittle to high for me.
 

dtracy11191978

Well-Known Member
It's on the 4tg dimmer setting. I'm still getting about 950 PPFD but temps are still high. I'm just gonna get a 6 inch inline fan.
 
Top