Mould on fabric pots

lochem

Well-Known Member
So I’ve got what looks like a bit of mould growing on the outside of one of my 3 gallon fabric pots.
I’m in a very small tent (80x80x180cm).
I have plenty of ventilation in, out and around the inside and my temps and RH are good. Under control and monitored.
My question is really: how can I safely treat this before it spreads because we all know it will spread.
The reason it’s started at all is because of my drain-to-waste setup. See pics for a visual explanation.
the plants are sitting on a drain tray inside a catchment tray and I have tried many ways to deal with DTW in my setup and honestly this is the easiest for letting it all drain through the pots when I feed and then I either dump from the side of the catchment tray or it just sits there and evaporates.
 

Attachments

twentyeight.threefive

Well-Known Member
So I’ve got what looks like a bit of mould growing on the outside of one of my 3 gallon fabric pots.
I’m in a very small tent (80x80x180cm).
I have plenty of ventilation in, out and around the inside and my temps and RH are good. Under control and monitored.
My question is really: how can I safely treat this before it spreads because we all know it will spread.
The reason it’s started at all is because of my drain-to-waste setup. See pics for a visual explanation.
the plants are sitting on a drain tray inside a catchment tray and I have tried many ways to deal with DTW in my setup and honestly this is the easiest for letting it all drain through the pots when I feed and then I either dump from the side of the catchment tray or it just sits there and evaporates.
Most likely what you are seeing is salt residue from your feedings. As the feed drains through the cloth pots some of the salts in the nutrient feed get stuck in the cloth. As the cloth starts to dry out it leaves behind the white chalky salt residue on the outside of the pots.

I don't see any issues with the setup. A damp cloth should remove it from the outside of the pot. I'm DTW in coco and a sample of my 3 gallon cloth pots by the time they are in mid to late flower.

bcn_pot_12_26_2020.jpg
 

lochem

Well-Known Member
Most likely what you are seeing is salt residue from your feedings. As the feed drains through the cloth pots some of the salts in the nutrient feed get stuck in the cloth. As the cloth starts to dry out it leaves behind the white chalky salt residue on the outside of the pots.

I don't see any issues with the setup. A damp cloth should remove it from the outside of the pot. I'm DTW in coco and a sample of my 3 gallon cloth pots by the time they are in mid to late flower.

View attachment 4778318
Ok I hope you are right but to me it looks fuzzy.
I’ll keep an eye on it.
 

Beehive

Well-Known Member
The white stuff is salt. All the fabric bags get it. I've had it on every pot I've ever used.

If you think its mold. Drop a few drops of H2O2 on the surface. It won't fizz. The white residue will still be there. It doesn't hurt anything. Besides messing with your head. Making you think its mold.
 

TintEastwood

Well-Known Member
I've had PM start on a fabric.

Loupe proved it.
Dabbing it with a vinegar soaked rag did the trick for me.

Increased constant air flow around the pots and no problems since. Ymmv
 

lochem

Well-Known Member
If you're pots are off the ground your run off is easily emptied with a piece of capillary mating, it just does it without any intervention from me once it's in place.
View attachment 4778351
I would expect salt to show in the drier warmer areas and be less visible when wet?
Very interesting idea. So it just soaks it up and then drips down into a jug or something.... I’ve never seen that kind of thing where would I find it
 

Star Dog

Well-Known Member
Very interesting idea. So it just soaks it up and then drips down into a jug or something.... I’ve never seen that kind of thing where would I find it
Any garden centre buddy maybe amazon or ebay, as you said it just soaks/wicks up water/nutrient and delivers it into the jug for you to empty.

Eta... Like siphoning the the jug side has to be lower than the tray.
 
Last edited:
Top