HydroKid239
Well-Known Member
Here's my precious now. In a 2x4x6.5.
1x Philzon "Newest" 600 LED (Pulling 108W from wall)
2x Cheap Chinese QB's ($54 for both) Ad said 1500W.. I say they're bright AF.. but no way they are more than 100-150W each. (Naively thinking)
3 gal fabric pot w/Coco loco & FFOF mix 50/50 (No added perlite - only added bone meal to lower section of the pot during transplant.)
1x 6 in fan on left side of tent blowing down on far end of the canopy.. while I have a 28 inch tower fan oscillating on the right side of the tent.
Exhaust fan pulling from tent to carbon filter outside of tent / passive intake thru vents.
I LTS'd her to stay low. While the main top is 37 inches fron the base of the stem.. the majority of the canopy is at 21 inches from the pot.
The training has given me plenty of room to work with, but guessing a wider tent would have done me some sweet justice here on size.
I vegged for 8 weeks total due to the stunts in growth from topping and defoliation.
She's coming up on week 5 of flower. I also Have 4 clones in a 2x2. All taken from the plant in the 2x4.
Cloned using clone-x gel in root riot cubes (Placed clone in upside down to keep it above the puddle of water I left in the tray.) Cubes also soaked in PH'd water to 6.8 for 30 mins and squeezed out prior to placing clone in
Humidity dome used in a homemade clone box - 90qt clear storage bin lined with aluminum foil.
2 cheap grow light bars strapped to the inside of the lid to the bin and a regular heating pad set on low to keep the roots warm.
I got roots after 5 days on 2 of 4 clones.. the other 2 took 7 days. Then into solo cups til week 3.. too tall for the bin.. now they are in the tent.
two of them had mold on the roots when in the dome, I sprayed with an H202/water mix and left them in the dome for a 2 more days.
If you want to know anything else just ask.. comments welcomed as well as advice/guidance.
1x Philzon "Newest" 600 LED (Pulling 108W from wall)
2x Cheap Chinese QB's ($54 for both) Ad said 1500W.. I say they're bright AF.. but no way they are more than 100-150W each. (Naively thinking)
3 gal fabric pot w/Coco loco & FFOF mix 50/50 (No added perlite - only added bone meal to lower section of the pot during transplant.)
1x 6 in fan on left side of tent blowing down on far end of the canopy.. while I have a 28 inch tower fan oscillating on the right side of the tent.
Exhaust fan pulling from tent to carbon filter outside of tent / passive intake thru vents.
I LTS'd her to stay low. While the main top is 37 inches fron the base of the stem.. the majority of the canopy is at 21 inches from the pot.
The training has given me plenty of room to work with, but guessing a wider tent would have done me some sweet justice here on size.
I vegged for 8 weeks total due to the stunts in growth from topping and defoliation.
She's coming up on week 5 of flower. I also Have 4 clones in a 2x2. All taken from the plant in the 2x4.
Cloned using clone-x gel in root riot cubes (Placed clone in upside down to keep it above the puddle of water I left in the tray.) Cubes also soaked in PH'd water to 6.8 for 30 mins and squeezed out prior to placing clone in
Humidity dome used in a homemade clone box - 90qt clear storage bin lined with aluminum foil.
2 cheap grow light bars strapped to the inside of the lid to the bin and a regular heating pad set on low to keep the roots warm.
I got roots after 5 days on 2 of 4 clones.. the other 2 took 7 days. Then into solo cups til week 3.. too tall for the bin.. now they are in the tent.
two of them had mold on the roots when in the dome, I sprayed with an H202/water mix and left them in the dome for a 2 more days.
If you want to know anything else just ask.. comments welcomed as well as advice/guidance.
