bridgelux

  1. E

    Please help me build Led Grow light ️

    I'm looking for 480w or 600w led grow light, I have read some threads here and come up with bridgelux eb gen 2, slim gen3 and samsung F series. Please give your guidance
  2. W

    Help with a Led Strip Build

    Will I need a Heatsink for Bridgelux 4ft EB gen 3 thrive @750ma?
  3. P

    Need help with diy cob panel please! They stopped working :(

    Hello fellow gardeners Been gardening for some years under hps but a few months ago decided to finally gather some €'s and switch to led :) thumbs up! Well, i searched a lot before, and now i have a 200w diy cob panel, made at home with only good materials. The cob's are four Vero 29 SE...
  4. T

    Micro cabinet grow(2x1x3feet), led light question

    Hello from far east. I hope everyone is having good and safe days at home. I was shy to ask for help but Im looking this forum for awhile and finished one cycle with auto flower grow. But didnt satisfy the result and now i want to make more box for photoperiod. Please help me with ur...
  5. AlphaKilo

    Wiring 10 2' Brudgelux EB Gen 2 with HLG-185H-24 (Constant Current)

    Hey folks, I was hoping to have some help in figuring out the wiring for building my DIY Quantum with CC. I was hoping to wire in parallel using the 4 connectors per light, but I am not too sure how to do it. From what I have seen, I can use wago connectors to make it parallel, but I am...
  6. A

    Bridgelux EB Gen 2 Heatsinking

    I created this led light strip build, and I was wondering if heatsinking would be sufficient. Also, I found this very cheap driver on Digikey and am wondering why it isn't suggested more often? Build Specs: 8x BXEB-L0560Z-35E2000-C-B3...
  7. L

    DIY LED light strips. Which is best?

    Looking to build a led strip growlight and am seeing mention of Bridgelux and different series Samsung led strips. Wondering which is best efficiency and which is best value. Are there any options besides Bridgelux and Samsung? Also, is there a better route to go then diy led light strips. Have...
  8. TrappinInNature

    Bridegelux EB cooling? And where to buy aluminum for heatsinks

    Hey guys im wondering about the type of cooling needed for 560mm Bridgelux EB strips at 19.5v 700ma. I've heard from some that they require no cooling, but i would rather stay on the safe side, so what type of cooling options can be had for cheap for these strips? And remember.... Cheap. Thanks
  9. Rattlehead121

    Grow Daddy Fridge First Grow

    hey every one! I wanted to share with the community what I have been working on lately. I have converted a old fridge into a grow cabinet and just got it operational last night. I’m sure there will be some minor tweaks along the way but here are some details Inside cabinet diementions...
  10. projectinfo

    Spoetnik#1, Lp clone, DIY. LED.

    Spoetnik#1 Paradise seeds strain. Clone from a Canadian licenced producer. This time im growing 8 plants per 2x4 table. One plant per square foot. Flower once they hit 10 inches tall, this strain is 90% indica and get very bushy so i wont be topping . Im using...
  11. remington_tuff_lipz

    Mars pro II 80 and 48 Reflector cob convert help

    Hey everyone, I am needing some help here.I have 3 working marshydro led fixtures but would like too convert too cob style lights.I took a couple pics of my marshydro reflector48,and pro II 80 and need help choosing which cobs i can use too convert these lights.I did a search and couldnt find...
  12. Shawndeadhead

    500w DIY led 4x4 organic 2.15 lb grow

    Due to my old phone dying and loosing all my pics and write up this journal will start on week 3 of flower. This grow is finished and I'll be uploading the rest over next few weeks. It did pull 2.15 lb dried and cured. This run is in a 4x4 tent running 1 gallon 50/50 coir and perlite using...
  13. maximum autism

    20 000 lumen Bridgelux COB headlights?

    Just throwing this out there, could a couple sets of 4k/3k COB headlights potentially replace an equivalent setup with reflectors? Maybe hung naked for some vert growing? Some of these are made with COBs that go into high-quality builds, has this already been looked at? I might be late to this...
  14. graying.geek

    Bridgelux EB-series on a 2' x 4' SCROG

    @Page { margin: 0.79in } p { margin-bottom: 0.1in; line-height: 120% } Like most rookies, it seemed simple, right? I ordered 2 Viparspectra 300w units from Amazon, bought Dr. Jacks Classic and Bloom and a couple other chemical nutes, mixed up some super soil, and popped a couple fem Northern...
  15. P

    Help choosing first build CoBs

    Hello to everyone! greetings from Argentina, i decided to make some investment and buy some cobs , here in Argentina there is no reseller of cree or bridgelux, so i have to buy them in the US, the only driver that i can get here , is the Mean Well HLG-240h-c700A, voltage output max is 357 v. The...
  16. BostonPuff

    Converting Roleadro blurple COB to higher quality

    Hey gang, how difficult would it be to swap out the chips on a light like : https://www.amazon.de/Roleadro-Pflanzenlampe-Vollspektrum-Gew%C3%A4chshaus-Wachstumslampe/dp/B01N0NQ6ZY/ref=sr_1_3?ie=UTF8&qid=1489491281&sr=8-3&keywords=roleadro to better quality chips? also what kind of chips...
  17. 420Barista

    Seeking reliable knowledge reguarding LED lighting

    Hey fellow potheads. I am seeking reliable knowledge regarding LED lighting. With Cree I know the CXB3590 chips are the best to go with due to Higher efficiency than cxa chips. as for vero and citizen i dont know much and any info and experience with them you can share will be appreciated. I...
  18. R

    LuXEON GEN3 COB LED..WHY NOT?

    http://www.lumileds.com/uploads/600/DS162-pdf Hello. What do you think about these COBs? Efficiency seems good and they cost 1/3 of vero29 and less than 1/4 of cxb3590. I don't know the spectral data of the light and do not know how they work in grow practice, They are produced by Philips ...
  19. freemanjack

    Vero-29 3Kw Big Build (copied across from other forum)

    Video now completed and uploaded, bring yer shades fer the money shot last few mins! Please rate share and comment, more to follow on thermal protection using the 10v dimmer circuit and a thermistor and drilling/tapping jig for pillar drill use.
  20. H

    Please guys any tips on cheap Vero 29 in Europe

    Please do anybody know where can I get vero v29 for cheap in the EU?
Top