I currently am running two QB 96 elite V2 in a 2x3x6 tent. running them about 120 watts a piece. would like to run them a little less and add in two of each boards below. basically one of each for each light one on the left and the other on the right. please let me know if there is anything that...
well thanks everyone for the help, house did not catch on fire but the qb96 run way too hot for my tent to justify using them. if is looking for hlg 185 54a drivers i got two brand new and one qb96 elite v2 brand new in the box.
thank you for that i think i screwed up my qb96 elite v2 by putting 14 gauge solid wire into the molex connector and cracked the negative terminal, its not fully cracked just at where you put the wire in. do you think i should still try to use it or is it garbage?
i have two mean well hlg-185h-54A drivers that i would like to run out side of my grow tent to two hlg QB96 V2. what would be the best way to connect the drivers to the leds. i have heard to use wago connectors with two inlets, but what size wire would i use and solid or stranded wire? looking...
i have two mean well hlg-185h-54A drivers that i would like to run out side of my grow tent to two hlg QB96 V2. what would be the best way to connect the drivers to the leds. i have heard to use wago connectors with two inlets, but what size wire would i use and solid or stranded wire? looking...
by anychance do you have a par reading of your qb96 running at 80 - 90 watts. i was wanting to get three for my 2x3 and was wondering if running them at lets say 80 watts and then two strips one on both sides of the qb96 would be too much light. one of these strips Nichia V3 3000K 48 4000k 48...
https://www.harborfreight.com/110-hp-transfer-pump-63317.html
https://www.amazon.com/Melnor-8-Pattern-Watering-Wand-15-Inch/dp/B00I9UPY54/ref=olp_product_details?_encoding=UTF8&me=&th=1
connected by garden hose. question though, would it be bad for the pump to be still in use even though it...
currently watering by hand. was using a drill water pump that was working really nice as it had a hose on it and could control where the water goes and the pressure. is there a way to make a similar mechanism to water my plants.
is there any way to drop 350 ppm tap water down to lets say about 100 ppm. i have heard of letting it set out for 24 hours for the chlorine but unsure about the high ppm.
i put the humidity meter outside of the tent and it was reading 41% humidity outside of the tent. so i am going to buy a digital humidifier and set it to 60% or so and see if that helps