Search results

Basically this. Most important part to me is a good 2 week give or take hanging slow dry in a cool 60-65f dark room with 55-60 humidity.

The growth rates are unmatched imo. In a perfect world with a perfect run 4 weeks veg from rooted clone i think rdwc/undercurrent finishes on top.

You dont have to move them around if you install a ball valve and a boiler drain on the return line. If you do that you can hook up a water hose and drain the system in less than 5 min. I also recommend a strainer and a second ball valve on that run before the pump as well.

Yes its the only tote thats worthy of using.

Just drill them with a hole saw bit and sand off the burs. The gorilla glue turns to an expanding foam thats waterproof. Its not that hard to be leak proof if you clean up the hole.

Uni seals, some sanding, and gorillia glue work fine.

If you have basic tools buying some 2x4's, poly film, and a staple gun is the way to go. You can turn one room into 2 or 3 and design it for your needs and the best advantage is the height.

Those alitas are beast too they make a bucket of water look like its on the stove boiling lol

I would run one al-80 with 45 gallons water pump will be fine its more than enough you could get a 600 if you wanted to save some

You need two of the al 80's for that much water.

Wow ok everything seems ok. It kinda looks like a potassium problem but if your ph levels have been right the whole grow it shouldn't be on gh Nutes. Have you ran that strain before? Are you running other strains with the same problem? It could be a genetic disorder.

i have nothing against ebb n flow but with the info out there today if you are going to switch systems i highly reccomend rdwc or at least dwc if you can keep the water under 68 degrees. The growth rates are un matched and will suprise you.

What is your water temp? How do your roots look? Do you have anything in the rez water that looks like pepper? Are you using cal mag?

Ppm's are always different. Each strain likes to eat more or less. Each pheno within that strain will eat more or less. The best thing you can do is start by going half the reccomended dosage on the container and watch the tips of the leaves on the plant. If they show no signs of nute burn...

You'll need a few parts for this but after that it is basically free to chill the rez during the winter. You'll need a bucket, water pump, some clear tubing, and some stainless steel worts. Thats the wort. Put One, two, or more in your rez. I would say 1-50 gallons one is fine. If you...

Stainless steel chilling worts used in home brewing beer is what you need.

And convert your gallons to liters and half of that is the least size you'll want your air pump. For the water pump you'll want to circulate your rez every 5 mins so multiply your gallons by 12 and that will be your minimum pump size.

No experience with air force air pumps but the alita 40 and 80 are monsters

Keep the water in the system at 55-65 degrees and ambient temprature really doesnt matter that much.

Between the bucket and seal. I used dish washing liquid on the inside to slide the pipe through easier. If you drill your own holes make sure you use a hole saw bit and sand it down lightly to get a good even seal.