1000w hps H.I.D lamp and 1 tiny closet MUWAHAHAHAHA !!!!!!!

qaws83

Active Member
it looks like a pretty nice set up what are the dimensions of the room and you might want to invest in a cool tube or cool hood just for the protection of your plants as to not over heat them also is it a single light? If it is you would be smart and conservative to also get a max of 600 watt for electricity heat and from what the space looks like 1000w is more for a 8x8 to 12x12 room from my experience but the vuds for the light are lookin bomb as fuck when you harvest and cure i'd like to know how many grams of dry bud that is the gram to watt ratio is probably ridiculously for two 3 foot plants.
 

0calli

Well-Known Member
There were three plants in there and I have zero problems with heat from the last one so let's hope lol from my last grow three plant ak-48 and white widow all together dried I believe was about 375 but I'm really dialed I now with feeding etc but now I'm running six plants and do I hope they'll fit of not I'm deff getting a hood or tube but my closet is just shy of a square meter.


Also I don't have to worry about paying electric cause it in my lease and the leaser is my wife's mom so lol I'd rather give my plants more how can you argue throwing between 140 000 - 165 000 lumens to 90,000 lumens I'll just get bigger tighter buds plus with all that power in the closet my nodes are nice and tight no stretching or nothing and the plants have never been healthier
 

0calli

Well-Known Member
I also have 2 intakes one from the side by regular fan and one in the front of the closet through the ac unit and 2 outakes one outake is through the top where the light enters so that draws almost all the heat the hps makes and one outake down below through the ac unit and I can rum my temps at a range of the lowest 63 to 88 deg
 

0calli

Well-Known Member
WARMING ABOUT ADVANCED NUTRIENTS !!!!!!!!!! I believe excludes jungle juice.

Results of Analysis – Heavy Metals (Big Bud)

Element

Lab Method

Results

Results Submitted to Support Product Registration

Arsenic (As)

EPA 3050B, 6010B

16.2 ppm

0.8 ppm

Cadmium (Cd)

EPA 3050B, 6010B

< 5 ppm

< 0.1 ppm

Mercury (Hg)

EPA 7471A

< 0.2 ppm

< 0.001 ppm

Lead (Pb)

EPA 3050B, 6010B

10.7 ppm

<0.5 ppm

Nickel (Ni)

EPA 3050B, 6010B

< 5 ppm

0.6 ppm

[End Quote]

Authorâ&#8364;&#8482;s note: Looking at the â&#8364;&#732;Results of Analysis â&#8364;&#8220; Heavy Metals (Big Bud)â&#8364;&#8482;, the HM (Heavy Metal) content found in Big Bud during independent tests is far higher than is stated by Advanced Nutrients. It is important to note that I make a recommendation in â&#8364;&#732;contaminants in cannabisâ&#8364;&#8482; (www.integralhydro.com/ advancednutrients), stating that Med dispensaries and/or growers should independently test fertilizers and not take manufacturer listings as fact.* This is just one example of why I make this recommendation (there are many more). Further, the results of the HM tests indicate relatively contaminated synthetic fertilizers and/or organic components were used in production.

*

May - July 2010

â&#8364;&#339;On July 12 2010, the Oregon Department of Agriculture (Department) conducted a marketplace inspection at Northern Light & Garden (9290 SW Beaverton-Hillsdale Hwy, Beaverton, OR 97005). During this inspection, the product(s) listed on the attached form were placed under an Oregon statewide Stop Sale, Use, or Removal. Order (SSURO).


The Department hereby instructs Advanced Nutrients and/or its agents to immediately cease all sales, offers of sale, or distribution of the product(s) listed on the attached forms into or within Oregon, by any type of business transaction or other method.

â&#8364;¦It is a violation of Oregon Revised Statutes (ORS) 633.366(a) to sell, offer for sale, or distribute a fertilizer, agricultural amendment, agricultural mineral, or lime product that is mislabeled under ORS 633.321.

It is a violation of ORS 633.366(1)(e) to sell, offer for sale, or distribute unregistered fertilizer, agricultural amendment, agricultural mineral, or lime products in the State of Oregon.â&#8364;

[End Quote]

Products Listed in violation Jan â&#8364;&#8220; Aug 2010

Advanced Nutrients, 0-2-4 Bud Ignitor (unregistered)
Advanced Nutrients, Tarantula (unregistered)
Advanced Nutrients, Voodoo Juice (mislabeled)
Advanced Nutrients, Piranha (mislabeled)
Advanced Nutrients, 0-0-1 Tarantula (mislabeled)
5-0-1 Micro (unregistered)
Bud Factor X (mislabeled)
1-5-4 Overdrive (mislabeled)
0-2-4 Big Bud (liquid) (unregistered)
0-0-13 Rhino Skin (unregistered)
4.8-1.8-4.3 Mother Earth Super Tea Grow (unregistered)
50-1.50-2.0 Mother Earth Super Tea Bloom (unregistered)
Grandma Energy's F-1 (mislabeled)
1.5-1.5-1.5 Grandma Energy's Sensational Seaweed (unregistered)
Grandma Energy's H-2 (mislabeled)
0-0-0.5 Organic B (unregistered)
Nirvana (mislabeled)
2-1-6 Grow (unregistered)
B-52 (no grade, no guaranteed analysis) (unregistered)
3-1 -3 Organic Iguana Juice Grow (unregistered)
Dr. Hornby Voodoo Juice Microbial Rhizosphere (unregistered)
Bud Candy (unregistered)
Juicy Roots (unregistered)
0-0-13 Rhino Skin (unregistered)
2-0-0 SensiCal Mg Calcium and Magnesium Bloom (unregistered)
Sensi Grow *(unregistered)
Sensi Bloom (unregistered)
Connoisseur (unregistered)

Keep in mind that at present â&#8364;&#8220; in addition to these violations â&#8364;&#8220; the â&#8364;&#732;Oregon Department of Agricultureâ&#8364;&#8482; has issued Advanced Nutrients with a further five counts of stop sale violation, fifteen counts of selling unregistered products, and eighteen counts of mislabeling. Actions for sample deficiencies are also in progress.
 

Uncultivated

Well-Known Member
if ya dont mind me asking what is prop ? cooling as i havent heard of this but have heard and read everything else you were saying and thanks for the back up against the thread troll there
+rep for you
I think he means proper cooling. Look up cooltubes. You can make one yourself pretty cheap, although I'm not sure how it would work with your bulb vertical like that.

EDIT - sorry, wasn't paying attention thought this was a new post, not 23 pages long lol. My bad for having more than one window open at once.
 

0calli

Well-Known Member
Lol it's ok buddy I do the same lol but yup got all that in order now.
I think he means proper cooling. Look up cooltubes. You can make one yourself pretty cheap, although I'm not sure how it would work with your bulb vertical like that.

EDIT - sorry, wasn't paying attention thought this was a new post, not 23 pages long lol. My bad for having more than one window open at once.
 

Finshaggy

Well-Known Member
I want to get 600W or 1000W HPS this grow.
That would be bad ass.

Onlt got like $50 I can put in on this grow though :(

Unless glass blowing picks up fast, once I start :)
 

llamas

Well-Known Member
Nice, love all the pics :mrgreen:

I have those exact same ice cream pales, but stopped using them because they are clear. Was to worried at end of flower id have light issues on roots.
 

RollUpMikey

Well-Known Member
Yeah, the clear buckets gotta get covered.

I used to cut the top 1/3 off of a 2L bottle and use them for vegging.

Since they're clear, I would run duct tape around the whole bottle to make it light tight/dark for roots. Putting in so much energy to grow, the thought of one of my ladies turning hermie pissed me off.

Small fix's make happy results:]
 

Harrekin

Well-Known Member
I didn't read the whole thread but how do you stop bleaching with the 1000w? My 600 in a cooltube gives off virtually no heat but it still bleaches the plants if the get too close to the glass.

Cheers man.
 

0calli

Well-Known Member
I don't let the plants get that close to the light and it hangs horizontally now so it's up high but even when my widows were only anywheres from 12-24 inches away they had no problems but I did get a few burns from reflections off the Mylar
 

0calli

Well-Known Member
OHH yeah look it up Mylar does cause burn rays if you use that cheap 1 mm stuff but with the 2 mm stuff it's easier to keep it flat without wrinkles which I read will reflect the light in ways it will burn but the 2 mm stuff goes on very flat but with my orca film it's just as good as Mylar of not better IMO
 
Top