Aussie Growers Thread
- Thread starter jats
- Start date
OzyM8
Well-Known Member
I can relate mate, i suffer a bit of insomnia...so when I do sleep vivid weird dreams follow.haha
Since starting growing, I'd guess I have related bad dreams a couple times a week.
The most distressing isn't raids or anything it's opening the door and and the plants are just gone with zero sign of anyone ever being there.
And then just like that, *poof*, they're gone.
View attachment 4481534
Great choice on the Chem Kesey, heard from a mate it's off the hook.
yeah, I was lucky. It’s been out of stock and then popped up on the BTGO..had to get it. Bonus!
PURPLEB3RRYKUSH
Well-Known Member
Bent her as far as i can. Dont want that cola against tent wall. Will mold with my humidity and probs snap. About 12" from light. Not directly under it
PURPLEB3RRYKUSH
Well-Known Member
Just figure out a feature i never knew i had. This thing called zoom =)
PURPLEB3RRYKUSH
Well-Known Member
Got a few little brown bits on my sugar leafs. Better not be mold
PURPLEB3RRYKUSH
Well-Known Member
Top cola closest to light is having issues. Is that sulfar, iron issue. My brown dots on my sugar leafs arnt mold i dont think probs pottasium.
2easy
Well-Known Member
It looks very much like light stress to me. Those white patches. Leaves turning up. Burnt looking tips on the leaves.
Not much you can do about it though if your out of headroom then your out of headroom.
wingerdinger
Well-Known Member
Hey guys
Need help with a co2 regulator
the few aussie shops over here want a fortune for a hydro regulator.
So i brought a us regulator and then retro fitted a type 30 nut onto it to accommodate our co2 gas cylinders.
The problem i have is there regulators have a floating nylon washer that is a major pain to get to fit properly.
takes anywhere from 30/1hr to get it to seal up right.
Has any 1 else found a solution or should i just pay the $300/$400 for a aussie one?
Need help with a co2 regulator
the few aussie shops over here want a fortune for a hydro regulator.
So i brought a us regulator and then retro fitted a type 30 nut onto it to accommodate our co2 gas cylinders.
The problem i have is there regulators have a floating nylon washer that is a major pain to get to fit properly.
takes anywhere from 30/1hr to get it to seal up right.
Has any 1 else found a solution or should i just pay the $300/$400 for a aussie one?
PURPLEB3RRYKUSH
Well-Known Member
Light stress since its only the top cola with these issues rest of my branches are like 2 feet away but there going alright
PURPLEB3RRYKUSH
Well-Known Member
Other lower branch looks ok in health compared to my main cola
PURPLEB3RRYKUSH
Well-Known Member
OzyM8
Well-Known Member
Don’t know about retro fitting the US ones, but that sounds like a pain to get it to seal. This is the one I use, no issues, good reg and reasonable price for a twin dial with 240V solenoid if that helps.
CO2 Regulators | Aqua Gardening
Hydroponics - Ventilation - CO2 - CO2 Regulators - Buy online at Aqua Gardening aquagardening.com.au 07 3354 1588
www.aquagardening.com.au
Last edited:
DustyDuke
Well-Known Member
How much of a yield increase do you get wit co2?Don’t know about retro fitting the US ones, but that sounds like a pain to get it to seal. This is the one I use, no issues, good reg and reasonable price for a twin dial with 240V solenoid if that helps.
CO2 Regulators | Aqua Gardening
Hydroponics - Ventilation - CO2 - CO2 Regulators - Buy online at Aqua Gardening aquagardening.com.au 07 3354 1588
OzyM8
Well-Known Member
I’d guess about a minimum 20% up to 30%+. This may sound odd but I don’t often weigh my yields, so it really is a guess. I am going to weigh this yield though just out of interest to see gram per watt with the new LED’s.
I use it for more than just yield increase. I really like running a sealed room, almost a must where I am with ambient environmental conditions. Gives me a heap of control over everything too, can basically create almost any condition I need to, and maintain a good VPD.
Last edited:
fusebox007
Member
Has anyone had any experience with this aussie site. https://buyweedaustralia.com.au/
Ive looked at it and am a bit wary. The onl;ine support does not work, wont return emails and wont answer text messages. Say they are based in Brissy. Any input would be appreciated. Thanks
Ive looked at it and am a bit wary. The onl;ine support does not work, wont return emails and wont answer text messages. Say they are based in Brissy. Any input would be appreciated. Thanks
reza92
Well-Known Member
sus as. Also they’re using at least 1 photoshopped image and I bet the others are at best generic stock photos off google.
The amnesia haze stock picture looks a bit like Asian too me as well.
13/10 would not spend my money there
Jackeeeboy
Member
Ok so after trying to grow my autoflower OG kush and failing miserably im gonna upgrade my shitty blurple and get a tent aswell.
Is this a good alternative to my shitty viparspectre
Is this a good alternative to my shitty viparspectre
Mars Hydro TS 600W LED Grow Light+60x60cm Grow Tent Kits Carbon Filter System | eBay
Find many great new & used options and get the best deals for Mars Hydro TS 600W LED Grow Light+60x60cm Grow Tent Kits Carbon Filter System at the best online prices at eBay!
www.ebay.com.au
OzyM8
Well-Known Member
f’it .I think they have to deal with their own business. Both on the net.
Disclaimer: I’ve never used either, however know a few that have: both responsive, get what you pay for.
chronicseeds.com.au - This website is for sale! - chronicseeds Resources and Information.
This website is for sale! chronicseeds.com.au is your first and best source for all of the information you’re looking for. From general topics to more of what you would expect to find here, chronicseeds.com.au has it all. We hope you find what you are searching for!
chronicseeds.com.au
Caveman Seeds | Aussie Cannabis | Australia
Caveman Seeds Australia, stocking a large number of cannabis seeds. New stock regularly! Delivery guaranteed!
www.cavemanseeds.com.au
Rewerb
Well-Known Member
Tesuco is a good brand of regulator, but it really isn't necessary to get the job done. Plenty of homebrew shops sell cheap regulators that will work quite adequately.Don’t know about retro fitting the US ones, but that sounds like a pain to get it to seal. This is the one I use, no issues, good reg and reasonable price for a twin dial with 240V solenoid if that helps.
CO2 Regulators | Aqua Gardening
Hydroponics - Ventilation - CO2 - CO2 Regulators - Buy online at Aqua Gardening aquagardening.com.au 07 3354 1588
@wingerdinger if you're even remotely handy, you could buy a separate solenoid off evilbay (about $15 for a 12V one) & a few parts to fit the solenoid to a cheapie reg. A bit of PINK teflon tape (it's stronger & seals better than the white stuff) & build one yourself. Hook it up to your controller & away you go.