cleanin your honey oil for smooth perfection

MR.Budder

MR.Budder

Member
k asuming you noe how to make honey oil im going to tell u trick called water washin





have your honey oil hard by placing it in the freezer for 10-20 min for the best result have your water as pure as possible boiling, filtering and leaving it out for 24 hour will all better the result now use the water which u have perpared nd pour onto the oil swishing it back and forth u with see a very thin layer raise to the top of the water which would be the waste get rid of it nd do it one more time then re cook ur oil for smooth perfection



happy toking
 
jberry

jberry

Well-Known Member
nice, i always wash my oil with distilled water too, but people always said i was trippin lol... i never figured to let it sit and remove the layer which im sure works better than just rinsing it several times like i do. i will try your method next time, but just swishing it with clean water and draining it seemed to improved the taste imo... tap water makes it worse imo bcuz of the minerals and other junk thats in it.

i also tried some washing techniques with 99% alcohol with mixed results but
anyhow, thanks for sharing, sometimes a little experimenting pays off.
 
turbo diesel

turbo diesel

Member
hope this question dosnt get me flamed but what is honey oil? is it from honey sorry if i seem stupid just never herd of it
 
MR.Budder

MR.Budder

Member
turbo diesel said:
hope this question dosnt get me flamed but what is honey oil? is it from honey sorry if i seem stupid just never herd of it
Click to expand...


it very potent gold marijuana oil around 65 -80 percent thc levels

its called honey cuz of how sweet nd gold it is usally made from butane
 
MR.Budder

MR.Budder

Member
fdd2blk said:
why would you need to "clean it"?

i'm confused.
Click to expand...


nothng to be confused about brother its just about having the smoothess smokee possible

as much as u think honey oil cant get smoother it can lol

try it out sometime it not to much effort nd te result are mind bogAling



ps how do u get repin ???
 
MR.Budder

MR.Budder

Member
fdd2blk said:
what are you going on about? i have been making honey for years. mine is already clean. maybe if you didn't use 99 cent butane. :bigjoint:

in fact i made some yesterday, wanna see it?
Click to expand...
i use colbri nd yes imsure it amazingly clean but just try it out man ull see a diffrence cant mix with water but some impurities can they float to the top of the water nd u get rid of it


nd yes i would like to see ur oil
 
MR.Budder

MR.Budder

Member
instead of haten try it nd just cuz im new to the site nd it says stranger on my name thing doesnt mean i dont noe what im talkin about


ur here to learn try it trust also have u ever made budder not butter
 
J

jeebuscheebus

Active Member
MR.Budder said:
k asuming you noe how to make honey oil im going to tell u trick called water washin and or steam clean





have your honey oil hard by placing it in the freezer for 10-20 min for the best result have your water as pure as possible boiling, filtering and leaving it out for 24 hour will all better the result but its not super important now use the water which u have perpared nd pour onto the oil swishing it back and forth u with see a very thin layer raise to the top of the water which would be the waste get rid of it nd do it one more time then re cook ur oil for smooth perfection or u can also do is have a pot of boiling water and steam ur oil by flipin it over the top of the pot let water drip off it
for a bit watch so u dont lose any gold



happy toking
Click to expand...
Your terrible grammar, spelling and sentence structure make it hard to comprehend what you are saying.

Do you KNOW what I'm saying?
 
That 5hit

That 5hit

Well-Known Member
1. dont fight with fdd. dont mater if your right or wrong it will end bad for you
2. are you saying use the water now at this step or after you scrap it all up
 
MR.Budder

MR.Budder

Member
That 5hit said:
1. dont fight with fdd. dont mater if your right or wrong it will end bad for you
2. are you saying use the water now at this step or after you scrap it all up
Click to expand...

thx bro yah let it harden abit then use clean water distalled or filterd right on top of the oil swish it around nd u see a very thin layer of somthing on top of the water its kinda see thro u see it near a light better
 
That 5hit

That 5hit

Well-Known Member
not a bad idea i can see this washing away some of the excess butain
it dont look like it will hurt the hash
 
dangledo

dangledo

Well-Known Member
mrbudder-
no worries. some people clearly have way to much time, and just love to hate. forget them.
+rep to you, as my brothers did this in the early 90's, for the same reason. Im not sure of the process, as Im just a bubble guy.
 
420 swede

420 swede

Active Member
i think i understand it, partialy.
To me it feels like u could lose some yield tho from just overdoing the process with this trick.

How do u do the last part, i mean when u dripped the water of the glass "container" like the one fdd used, u will probably not be able to drip all water away without getting some oil with it...how do u get rith of ALL the water, u heat it until its only pure oil left again or what ?
 
MR.Budder

MR.Budder

Member
420 swede said:
i think i understand it, partialy.
To me it feels like u could lose some yield tho from just overdoing the process with this trick.

How do u do the last part, i mean when u dripped the water of the glass "container" like the one fdd used, u will probably not be able to drip all water away without getting some oil with it...how do u get rith of ALL the water, u heat it until its only pure oil left again or what ?
Click to expand...

if u use cold water when doin this process
u wont lose anything but impurities but yes u will lose a bit but next to nothin filp ur container upside down to get rid of water then re heat it or wait till the couple drops of water dry up


repeat once more if u like
 
You must log in or register to reply here.
Top