Club 315w lec
- Thread starter bob223
- Start date
DemonTrich
Well-Known Member
How's the stretch compare to hps? If you happen to run gg4 (clone version, not s1, bag seed, ect), how's that stretch?
@GemuGrows
Try swapping out parts and see if you can narrow it down while you wait.
@GemuGrows
Try swapping out parts and see if you can narrow it down while you wait.
GemuGrows
Well-Known Member
Yep i'm trying as many things as I can 
Today I fired it up dimmed to 80%. It was on longer than "usual" so I boosted it up to 90%. I just pumped it up to 100% and i'll see how that goes.
I really wanna use this light lmfao. It seems like awesome setup,
If it ends up working then I literally have no idea what fixed it. But thats fine with me
Today I fired it up dimmed to 80%. It was on longer than "usual" so I boosted it up to 90%. I just pumped it up to 100% and i'll see how that goes.
I really wanna use this light lmfao. It seems like awesome setup,
If it ends up working then I literally have no idea what fixed it. But thats fine with me
bob223
Well-Known Member
Oh i also remember why i dont grow This master kush out very often. Besides being a bitch to trim its super finicky to Heat and PH (only in flower) but when you get everything right during its 66-73 day flower period
it can really reward you. I seem to really have the best luck with it in the colder months.
thccbdhealth
Well-Known Member
ok I'm ready to pull the trigger, and go to order the light, decided to call nanolux directly. found out there distributer in Canada, Call that distributer, yes they carry them and just started selling that model......call my hydro shop to get them to call that distributer and get me the light.... They tell them the bulb is available but not the fixture, and say the sun system is available...
So now, the Sun system is being recommended to me over the Nanolux.. and the difference in price is a couple 100, I initially thought sun system was a "lower quality" unit, based on my first impression's, but they are certianlly not priced like that.
Can the Community on here explain why Id be better with the sun system @ 900 vs the Nanolux @ 600
I'm not afraid to spend money on a good light, I'm just not made of it, and if I'm ordering the Nanolux from the States, I wont have really have any warranty without multiple shipping cost's, so effectively void
So now, the Sun system is being recommended to me over the Nanolux.. and the difference in price is a couple 100, I initially thought sun system was a "lower quality" unit, based on my first impression's, but they are certianlly not priced like that.
Can the Community on here explain why Id be better with the sun system @ 900 vs the Nanolux @ 600
I'm not afraid to spend money on a good light, I'm just not made of it, and if I'm ordering the Nanolux from the States, I wont have really have any warranty without multiple shipping cost's, so effectively void
Sire Killem All
Well-Known Member
about 7 days till i start dropping some.
Carolina Dream'n
Well-Known Member
Nanolux is lower quality in the realm in my opinion. The ballast in the SunSystem is a Phillips, the bulb too. The nanolux uses a ballast they made to replicate Phillips, and it only works with MaxPar bulbs, which imo are lesser quality too.
The fixture itself is much better with the SunSystem than the nanolux too.
Yodaweed
Well-Known Member
I thought master kush is from California , snoop dogg's master kush...
bob223
Well-Known Member
My understanding is Master Kush is From Holland in the late 90's. Its should be a land race indica ( Hindu kush) and crossed with skunk #1.
Master Kush has no relation to American kush's like O.g. Kush and similar.
The only thing i know about master kush and snoop dogg is at one point he said it is his favorite strain?
Sire Killem All
Well-Known Member
misinformation, i run philips in mine fine
thccbdhealth
Well-Known Member
@Sirekillemall. I see from your pictures above your running the sun system and have said your also running the nanotechnology 630..... is there any difference in bulb illumination in your opion?
Carolina Dream'n
Well-Known Member
We have done testing on almost all 315s fixtures and bulbs at this point. The nanolux ballast works much better with the maxpar bulb. PAR meters don't lie. The nanolux might run a philips bulb, but it will not be to that bulbs full potential.
Sire Killem All
Well-Known Member
got some data to show? seen most videos showing comparisons.
i also run mix of philips and maxpar on my sunplix.only difference is the 4k philips looks more blue imo.
the hoods are sun system, "designed" in cali, made in china. the ballast are sunplix. got 3x630 running mix of maxpar and philips.
i also run mix of philips and maxpar on my sunplix.only difference is the 4k philips looks more blue imo.
Last edited:
DemonTrich
Well-Known Member
.
thccbdhealth
Well-Known Member
So then the Sun System in the one to go with? They are the only company that has the use of the CMH Philips ballast to match their 315w bulb?
DemonTrich
Well-Known Member
Wrong
Prism also runs phillips bulbs
See above pic. 1900.00
Not counting the t4 in the background
Prism also runs phillips bulbs
See above pic. 1900.00
Not counting the t4 in the background
thccbdhealth
Well-Known Member
Philips Ballast ...
apparently many will run the bulb... but not to the designed specs of the bulb
and on the note of sunsystems units, their website says all their units have a 6 foot power cord.. Defiantly not long enough for my need, if pluged into an extenshion?
mount a power bar on the wall with-in 6 feet of blub location and have powerbar ran to wall outlet?
apparently many will run the bulb... but not to the designed specs of the bulb
and on the note of sunsystems units, their website says all their units have a 6 foot power cord.. Defiantly not long enough for my need, if pluged into an extenshion?
mount a power bar on the wall with-in 6 feet of blub location and have powerbar ran to wall outlet?
DemonTrich
Well-Known Member
Check out the 30pg thread over at mag. Lots of ppl running prism ballasts and Philips bulbs
OR I just made a 1900 error
OR I just made a 1900 error