Connecting 3/4" PVC to 3/4" tubing

Does anyone know how i can attatc some 3/4" tubing to some 3/4/" PVC pipe?

Thanks ahead of time. I have a method in mind but it is just too expensive. I have to repeat this task for 20+ 5 gal buckets. So i cant spend 5 bucks making the joing connections.

Any cheap fixes?

If your talking vinyl hose/tubing, just keep an insulated large mug full of hot water at hand. Hold the end of the hose in thw e water for a minute or so and then pull it out of the water and quickly slide/force it over the pipe. It will streatch a lot when hot but shrink down very, very tight when it cools. Clamps will not be needed if you force the hose on an inch or so before it cools.

I found some uniseals here

http://verticalhydro.com/index.php?main_page=product_info&cPath=3_4&products_id=6&zenid=3e865b07cca44a1dd5e654580513841c

i bought some of these to plug into the uniseal

http://www.dripworksusa.com/store/pvcbarb.php

i got the slip insert barb