northrengrows
Member
So here is my issue i am planning on ordering
3x 46V test at 1.12A or 1200mA
https://www.digikey.ca/product-detail/en/samsung-semiconductor-inc/SI-B8T521560WW/1510-2223-ND/6624007
Powered by 1x HLG240H-C1400B 179V @ 1.4A constant current driver
http://ca.mouser.com/ProductDetail/Mean-Well/HLG-240H-C1400B/?qs=sGAEpiMZZMt5PRBMPTWcac5aDEswMPfpYBYEHAtMo1/hUWrk4tbktg==
so now the question: Can i safely run 3x the chip sets wired in series at 1.4A even thou they are tested at 1.12A ?
I know it seems silly but i tried to look up the max current handling or Max amps on the chip sets but it was not listed on the fact sheet.
The light will be 27000 Lm @ 175 Lm/W built for about 200$ (cdn) going for a Quantum Panel like build
Any and all help is appreciated, questions also welcome.
3x 46V test at 1.12A or 1200mA
https://www.digikey.ca/product-detail/en/samsung-semiconductor-inc/SI-B8T521560WW/1510-2223-ND/6624007
Powered by 1x HLG240H-C1400B 179V @ 1.4A constant current driver
http://ca.mouser.com/ProductDetail/Mean-Well/HLG-240H-C1400B/?qs=sGAEpiMZZMt5PRBMPTWcac5aDEswMPfpYBYEHAtMo1/hUWrk4tbktg==
so now the question: Can i safely run 3x the chip sets wired in series at 1.4A even thou they are tested at 1.12A ?
I know it seems silly but i tried to look up the max current handling or Max amps on the chip sets but it was not listed on the fact sheet.
The light will be 27000 Lm @ 175 Lm/W built for about 200$ (cdn) going for a Quantum Panel like build
Any and all help is appreciated, questions also welcome.