DIY with Quantum Boards

Sleezygeezy

Well-Known Member
Strictly just for vegging my 3×3. Measuring 29"×25" and weighing in at a whopping 4.8lbs fully dressed. I give you, "The VEdGe Hammer". I was high & that was the best I could come up with. It's 4- 4000k QB120's wired in parallel, powered by a Meanwell ELG-240-24A. It's dimmable and able to push 240watts. Each board has an inline 3A fuse just in case, which I don't really think is needed for my driver. One QB came disconnected while I was measuring current and did not notice any change in the others nor did any fuses blow. It's spliced together w/2 wago's in the center bar. The ground wire is connected in there too which grounds the frame and qb's to the case of the driver. And it has an IEC plug for easy connect to my driver. This thing will veg a 4×4 no problem. 1509737676260-764345211.jpg 1509737752714-1322904619.jpg 15097378031321339059874.jpg
 

pop22

Well-Known Member
Very nicely done!

Strictly just for vegging my 3×3. Measuring 29"×25" and weighing in at a whopping 4.8lbs fully dressed. I give you, "The VEdGe Hammer". I was high & that was the best I could come up with. It's 4- 4000k QB120's wired in parallel, powered by a Meanwell ELG-240-24A. It's dimmable and able to push 240watts. Each board has an inline 3A fuse just in case, which I don't really think is needed for my driver. One QB came disconnected while I was measuring current and did not notice any change in the others nor did any fuses blow. It's spliced together w/2 wago's in the center bar. The ground wire is connected in there too which grounds the frame and qb's to the case of the driver. And it has an IEC plug for easy connect to my driver. This thing will veg a 4×4 no problem. View attachment 4037417 View attachment 4037418 View attachment 4037421
 

Budzbuddha

Well-Known Member
Weekend update :

Chopped a 1 gallon grow bag plant GSG - nice nugs all the way down . I let plant dry out in bag for about 5 days then cut stalk ... Did some trimming and in the jars they went .
I usually leave a bit of sugar leaf on the buds as personal preference. And ended up with about 3 jars ... Not Too bad for a small bag grow. There is 3 more plants getting cut in 2-3 weeks ( infinity room grow ) ......

image.jpeg
image.jpeg

In the 3x3 , I have all GOG ( Godfather ) flipped 12/12 - 2 are week 2 with the front LST plant going thru transition. Had to start some preventative SPINOSAD because of some shit that happened in Infinity room ... But I corrected that and am just trying to complete the last phase of flower with those. Quantums are trucking along just fine .

GODFATHER OG :

image.jpeg
image.jpeg
 
Last edited:

Budzbuddha

Well-Known Member
Weekend goals - quantum edibles

TWISTED CHOCOCHIPS

Candy Dream Cannabutter
808 Headband - ( dispensary buds ) made into infused honey.

Candy was grown in late July and kept a half jar stored ( with integra pak ) for
Cooking or whatever .... Made me some butter and stuff. Grown with 4 QB 304

image.jpeg

Figured I would share another Quantum Board treat ...
Thanks @robincnn and @Stephenj37826

Wait til Santa eats this shit .... Lol

image.jpeg
 

Sleezygeezy

Well-Known Member
It should but most people here (I think), including me, use the one with insulation rated for 300v. And in series, you will be running 96v through that wire. Cutting it kinda close.
 
Top