DNA-Lemon Skunk

Status
Not open for further replies.

purpdaddy

Well-Known Member
Summary of Macronutrients
Macronutrients are the elements most vital to all plant-life. There are three major and most prominent macronutrients: Nitrogen (“N”), Phosphorus (“P”), and Potassium (“K”). All fertilizers contain these three fundamental elements, but in varying amounts, depending on fertilizer type/brand. The N-P-K ratio of the fertilizer will be listed on the side of the container/box in the form of three numbers separated by hyphens (e.g. 20-20-20, etc.); choose a fertilizer that correlates with your specific needs and stage of plant-growth. TIP: In their vegetative state, cannabis plants thrive primarily on “N” and “P”; and in their flowering-stage, “P” and “K” become more essential.

Summary of Micronutrients
Along with the basic macronutrients, plants also require micronutrients (or Trace-Elements) for sustained health and vigor. Some of these trace-elements are Calcium (“Ca”), Magnesium (“Mg”), Sulfur (“S”), Manganese (“Mn”), Boron (“B”), Zinc (“Zn”), and Copper (“Cu”). They are present in most, if not all, fertilizers, but in generally lesser portions than the major macronutrients.

Below is a list of the basic macronutrients and micronutrients/trace-elements, along with the horticultural-benefits and deficiency-symptoms of each:

Element Name: Nitrogen
Symbol: N
Atomic Number: 7
Atomic Mass: 14.00674
Horticultural-Benefit: Nitrogen promotes photosynthesis, and is directly responsible for the production of chlorophyll. It stimulates leaf and stem growth, and aids the overall size and vigor of the plants.
Deficiency-Symptoms: A nitrogen-deficiency can be recognized by reduced growth-rates and yellowing of the leaves (starting with the older/lower leaves). Colder soil-temperatures make nitrogen less-available to plants.


Element Name: Phosphorus
Symbol: P
Atomic Number: 15
Atomic Mass: 30.973762
Horticultural-Benefit: Phosphorus aids in the germination of seeds, and the growth of seedlings and roots. It is also vital the production of terpene resins, floral clusters, and necessary sugars and starches. Phosphorus also influences overall vigor.
Deficiency-Symptoms: A phosphorus-deficiency can be noted by reduced growth-rates and the production of smaller leaves which wilt/drop quickly. The leaves will be a dull, bluish-green, which will turn purplish or bronzy, and will have seared edges. Excessive “P”-levels can initiate a potassium-deficiency.


Element Name: Potassium
Symbol: K
Atomic Number: 19
Atomic Mass: 39.0983
Horticultural-Benefit: Potassium is important to your plants for metabolic changes during flowering, and the production of floral clusters. It also promotes general plant-vigor, disease-resistance, and sturdy growth.
Deficiency-Symptoms: A potassium-deficiency will retard growth-rates, and cause leaf-tips and -edges to become a scorched-brown color, with curled margins.


Element Name: Calcium
Symbol: Ca
Atomic Number: 20
Atomic Mass: 40.078
Horticultural-Benefit: Calcium is a key ingredient in cell-walls. It strengthens stems/stalks/branches, and also contributes to root-development/growth, primarily that of the rot-tips.
Deficiency-Symptoms: A calcium-deficiency can be recognized by distorted leaves, with hooked tips and curled margins. A deficiency would also result in under-developed roots, with weak root-tips.


Element Name: Magnesium
Symbol: Mg
Atomic Number: 12
Atomic Mass: 24.3050
Horticultural-Benefit: Magnesium is significant for chlorophyll-production and most enzyme reactions. It is responsible for healthy leaf-structure and -production, as well as sustaining healthy vein-structure in the leaves.
Deficiency-Symptoms: A magnesium-deficiency will affect various plant-species differently. The most common symptoms in cannabis plants are a vivid yellowing of the leaves, followed by leaves falling without withering, starting with the older/lower leaves. Excessive “Mg”-levels may initiate a calcium-deficiency.


Element Name: Sulfur
Symbol: S
Atomic Number: 16
Atomic Mass: 32.066
Horticultural-Benefit: Sulfur, being an ingredient in plant-protiens, is vital for protein-production, chlorophyll-production and vegetative growth.
Deficiency-Symptoms: A sulfur-deficiency can be identified by retarded growth-rates, accompanied by small, mutated leaves which are round in shape and roll upwards. Leaves will become stiff and brittle, and will fall off. A “S”-deficiency will also cause flowers on the top of kholas to die.


Element Name: Manganese
Symbol: Mn
Atomic Number: 25
Atomic Mass: 54.93805
Horticultural-Benefit: Manganese is a catalyst for many enzymes, and also aids photosynthesis/ chlorophyll-production.
Deficiency-Symptoms: A manganese-deficiency will have varying symptoms, depending on plant-species. The most common symptoms in cannabis plants are a yellowing of chloroplasts while stems remain relatively green. White or grey specks/spots may develop on the surfaces of leaves. As is usually the case, older/lower leaves will be affected first. Excessive “Mn”-levels may cause an “Fe”(iron)-deficiency, which will exhibit symptoms similar to a “Mn”-deficiency.


Element Name: Boron
Symbol: B
Atomic Number: 5
Atomic Mass: 10.811
Horticultural-Benefit: Boron aids the movement of necessary sugars, as well as reproduction, and water intake by cells. It also assists in the production of stems/stalks/branches, and keeps calcium in a soluble form. Furthermore, “B” contributes to leaf-production/-coloring/and -structure.
Deficiency-Symptoms: A boron-deficiency can be recognized by distorted and/or dead growing tips, hollow stems, and malformed fruits/flowers. Plants suffering from a “B”-deficiency frequently exhibit scorched, curled leaves, which are often spotted and discolored; young/vegetative leaves are affected first. Excessive “B”-levels may cause plants to exhibit symptoms similar to those of “Mg”-/”K”-deficiencies.


Element Name: Zinc
Symbol: Zn
Atomic Number: 30
Atomic Mass: 65.39
Horticultural-Benefit: Zinc-levels directly affect plant-size and -maturation , as it is necessary for the production of plant-proteins. Consequently, “Zn” is vital to the production of leaves and stalks/stems/branches.
Deficiency-Symptoms: A deficiency of zinc will result in the yellowing of chloroplasts between leaf-veins, usually with purplish spots of dead cells on leaf-surfaces; older/lower leaves are the first to show symptoms. Vegetative-growth is retarded and deformed, and floral-growth is reduced. Excessive “Zn”-levels can initiate an “Fe”(iron)-deficiency.


Element Name: Copper
Symbol: Cu
Atomic Number: 29
Atomic Mass: 63.546
Horticultural-Benefit: Copper is responsible for healthy, vigorous growth, and strengthens stalks/stem/branches. It is also necessary for the production of plant-proteins, and is crucial for reproduction.
Deficiency-Symptoms: A copper-deficiency can cause otherwise green leaves to adopt a bluish hue. Vegetative growth may fail to unfold, and may be yellow at the tips and edges.
 

purpdaddy

Well-Known Member
HERE IS SOME OTHER GOOD INFO THAT NEEDS TO BE STATED AND/OR EXPLAINED.

Contributed by: lbhydro

These are the exact steps I take to properly preparing a nute solution:
Note: My res is 25 gallons, so you will have to adjust all volumes for your res size.

I would suggest getting a container that would be able to hold the same amount of water as your res. That way you can prepare your mixture in the mixing container, then empty your rez and immediately pump the fresh solution into your system so that they will be out of the water for a minimal amount of time to reduce shock.
Use good water. I use RO (Reverse Osmosis) water.
Add all of your “extras” to your reservoir
In bloom, I add 80ml of Bcuzz bloom stimulant (Bcuzz’s suggested str for 25 gals), and a small amount of Epsom salts, about 2 TSP (10ml). You must mix your e-salts in warm water, or they will take forever to dissolve and throw off your readings. This little trick will help you whenever you need to mix something solid into your nute solution. Dissolve it first.
Nutrient mixing.
What I do is get a gallon of water, and mix my nutes ratios into that container, then I simply add that solution to my res until I reach the desired ppm. You CANNOT mix them together in their pure form, they must be diluted or nutrient lockout can occur. I never pour nutes directly into the reservoir.
My system holds 25 gallons, so I use 80ml as my “base unit” of measure. I use the 1-2-3 (G-M-B) formula. It is the one that GH recommends and it works well for me. For example 1-2-3 = 80ml – 160ml – 240ml
Always add Micro, then Grow, then Bloom.
In my bucket of water I add 2 measures of GH Micro. Mix. Then I add my 1 measure of Grow. Mix. Then I add my 3 measures of Bloom. Mix.
My measure is 80ml - yours will be different according to your res size.
Use a submersible water pump to keep everything mixing in your main rez.
Add the GH mixture slowly to the mixing container until I reach my desired ppm. After I have the ppm’s set, I adjust my ph until my mixture is perfect. Then I quickly dump my res and put the contents form my mixing container into my res.
Be sure your nutes are fully mixed before trusting your readings. I have found ph to take longer to stabilize than ppm's, so allow the tank to really mix up well before you count on a ph reading to be true.
Here are some GH ratios I use:
Cuttings
pure RO water and a rooting powder, liquid, or gel is all you need
Seedlings / clones
Add a drop of superthrive per gallon of water, e-salts, and a 1-1-1 (G-M-B) GH mixture at 250 ppm and adjust ph to 5.2 – 5.8.
Early veg
Add a drop of superthrive per gallon of water, e-salts, and a 1-1-1 (G-M-B) GH mixture at 350-450 ppm and adjust ph to 5.2 – 5.8.
Vegging
Add a drop of superthrive per gallon of water, e-salts, and a 3-2-1 (G-M-B) GH mixture at 500-650 ppm and adjust ph to 5.2 – 5.8.
Transition to blooming (first 2 weeks of 12/12)
Add my Bcuzz bloom booster, e-salts, and a 1-1-1 (G-M-B) GH mixture at 700 ppm and adjust ph to 5.2 – 5.8.
Full bloom
Add my Bcuzz bloom booster, e-salts, and a 1-2-3 (G-M-B) GH mixture at 750 - 950 ppm and adjust ph to 5.2 – 5.8.
Tips:
>When I give a range of ppm, I start off low and mix a little extra GH to slowly bump up the ppms as the days go on to make sure the plants can handle it. Every strain will grow a little different.
>If system heat is a problem, you can use a silicone solution such as pro-tekt (or Pro-silica) to raise ph and give the plants a little something to help them out in hot weather. Use it sparingly. I wouldn’t add more than 1 ml per gallon into your res. It may slow down growth.
>Don’t try to add all kinds of stuff to your res, the simpler the better. That is why I add so little Epsom salts. If I start having Mg issues I would bump it up, but I haven’t had to yet.
>You will not need H2O2 (hydrogen peroxide) unless you have an improper nute solution. If you keep your res temps at 68-72* and it is light tight you won’t have algae problems and your plants will be the happiest. The higher your nute temps go, the less O2 the water can hold. It is a property of water itself and no amount of bubbles will help.
>I keep my nutes at a ph between 5.2 – 5.8. If it is in this range DO NOT try to get it “perfect” by adding ph up and down.
If you mix up your solution and you don't HAVE to use the ph up or down DON'T. When you do adjust try to hit 5.5 but once again don’t be too picky. If it’s a little higher or lower let it go. You’ll just mess things up by trying to mix it exactly.
>If you have a nutrient deficiency, or some other problem that you think might be nutrient related - change your nutes!
[Editor's note:
>Some members prefer to add main nutrient components first, additives later:
(~shabang~) "Anything organic will throw your EC/PPM measurements off and it will be harder to judge how much salt fertilizer you've added. I've always thought it best to put the additives in last after you're happy with the chem levels."
>Be careful when mixing highly concentrated nutrients, as lockout can occur when adding pH "up" (As may occur in a smaller volume). It is my experience that K can precipitate out of solution - make sure pH "up" or "Down" is added to the nutrient solution with additional water).
>Another mixup procedure is to mix the nutrients directly into the main rez. This method takes longer, as adjustments require additional mixup of seperate nutrient components.
>(Reggea love) Nutrients strengths should be qualified with the ppm/us conversion factor used (such as 0.5, 0.6 or 0.7), which can make a significant difference to the actual strengths.]
 

ganjaluvr

Well-Known Member
im just starting a kandy kush from reserva privada....
Had an issue with the dna bean.... its disgusting...sprout yet never grew.... still alive tho...
but alll my other infants look good...
so im intersted to see how yours works out....
Lemon skunk was one of my initial choices..... nice pic!


I too am having issues with my Lemon Skunk bean. her leaves have what look to be rust colored spots on them.. but like that's how it looks.. unless you get close and look... then you can almost see through the spots.. almost look like holes in the leaves.. but.. yet there's still plant fibers.. ??? It's weird...

I tried cutting off the bad parts of the leaves.. but that didn't work.

The only thing I can think of.. to make sure it wasn't a fuck up on my part would be to move her to a new pot. With all new soil.. would be tricky but doable.

just so everyone knows... she's exactly 24 days old from seed. Also!!! I tried this one.. with the 12/12 from seed method.. however!! I did actually give her about 12 days worth of vegging... then switched her over to 12/12. She also has pre-flowers showing at the budding sites..and is just starting to form her 5th set of branches... or 5th set of true leafs.. whichever you want to call it.

I think i'll just give her a new pot.. with new soil and see if that fixes the leaf problem.. if not... then I know its the plants fault.. and not something I did.

anywho..

Happy Holiday's Everyone!!!

Peace
 

purpdaddy

Well-Known Member
Well damn...

It was supposed to be cold this week but not this fucked up climate...like in the 20s-40s

I walk outside this mornin and its 88!Hot as shit! Its always like this in the winter..it NEVER snows..

Ive been living here 26 yrs and it has snowed twice!

Southern weather for ya!
 

purpdaddy

Well-Known Member
Dropped the light in the cooltube about 2' above my lil one..Looks just like it did b4 i dropped the light...I thought it was a gonner for sure.Well see how it looks at 5:00

Well the bulb went out..i thought i broke my light..so i put the HPS light in there and it fired up..so the bulb must have gotten messed up..anyway ..

just had to order new bulbs i went with the Agrosun Gold MH and the hortilux super HPS,,one day delivery...
it will be just fine under the HPS till the MH comes in..should be this week!...i needed new bulbs anyways!
 

purpdaddy

Well-Known Member
my new MH bulb comming AGROSUN Gold Halides make plants grow their best! A Hydrofarm exclusive, these spectrally enhanced halides are the best all-purpose growth and fruiting/flowering light you can use. They emit more of the red wavelengths than the common halides. They are the "Gold Standard" in plant growth lighting, and thousands are in use by satisfied gardeners worldwide. AGROSUN Gold Halides are super Halides with MORE red for flowering than other common halides.
AGROSUN Halides OUTPERFORM Common Sodiums in 4.5" Geranium Test* - 45% More Flowers Produced, 25% More Axillary Branching!
 

purpdaddy

Well-Known Member
EYE Hortilux Super HPS grow lamps fine-tune your lighting system to provide optimum spectral energy levels that promote vigorous plant growth. The EYE Super HPS EN Grow Lamps provide 17% more total energy and 25% more energy in the violet, blue, and green spectrum than standard High Pressure Sodium lamps.
Lamp Code: LU400S/HTL/EN
Initial Lumens: 55000
Rated Life Hours: 24000
 

purpdaddy

Well-Known Member
Today was a good day for the HYDRO team!Got much needed supplies in!



Ok got my canfan in .Its about as loud as a computer fan (when i shut the door to the room i could barely hear the canfan but the CPU fan could be heard well)..Its big,bulky,heavy and plus with my lil CPU fan im getting temps around 3-4 degrees higher so theres no need for it now so i took it off.Will work perfect in the cabinet im gonna build.If i had a lil more space,i would keep it on but i need more!
I highly recommend these VORETEX CANFANS!Not loud as i expected!


AgroSun Gold 400w. MH with enhanced RED spectrum


EYE Hortilux SUPER HPS 400w
 
Status
Not open for further replies.
Top